What's new

Search results

  1. BenTerrible

    Dynapath Delta 20 Power Supply Failure

    Thank you! This will help me out!
  2. BenTerrible

    Dynapath Delta 20 Power Supply Failure

    Tried to power up my Tree 325 last weekend. Received a dead battery error at start up (locked out of the control). Replaced the 3.6v battery that is on the Aux board in the Dynapath Delta 20 controller. Powered on the machine, checksum pass, diagnostics pass... Display read "Press Mode...
  3. BenTerrible

    Equipment Moving-Pick up at residence, East to West Haul

    I am considering purchasing a small press brake located on the East coast. The seller has the press at his residence, no forklift/not palletized (this is a small machine, 1600 lbs). I have searched high and low for one local/closer, nothing worth much more than it's weight in scrap...
  4. BenTerrible

    WTB Okuma Cadet LNC8

    Still searching...the LNC-8-M with live tooling is what I am after.
  5. BenTerrible

    Looking for equipment mover San Jose to San Diego

    Can anyone recommend a machinery mover? I need quotes getting a turning center from San Jose to San Diego. I am trying to have a rigger on-site when the seller's new machine arrives, as they have offered to load the one I purchased. Thanks in advance! -BT
  6. BenTerrible

    WTB Okuma Cadet LNC8

    Looking for a clean Okuma LNC8. Options I am interested in are as follows (they are wishlist items): 5020 control with IGF Big Bore Spindle Chip Conveyor Parts Catcher Tailstock Live Tooling I am open to machines that are not local to me (San Diego). Let me know what you have! -BT
  7. BenTerrible

    Okuma LNC-8 School me on these machines!

    Appreciate the feedback. I have my eye on a few LNC8 machines, both local and out of state. Having a hell of time trying to get these machinery brokers to actually respond/answer basic questions regarding their respective machines. Seems the dealers that have these listed haven't got a clue of...
  8. BenTerrible

    Okuma LNC-8 School me on these machines!

    Considering a small turning center. I have my eye on a few, but the Okuma LNC-8 caught my attention. 1. Controls - The machine I am looking at I believe has the OSP5020 control. Feedback on this control? I hear Okuma machines are those that users either love.or hate. I have yet tonuse one...
  9. BenTerrible

    Trico Spraymaster II - About ready to toss this thing into the trash!

    I suppose my initiation of this thread was purely out of frustration. After further review of the Trico instructions, I read the "DO NOT" section... "DO NOT use volatile or harmful chemicals in the Trico Spraymaster..." I decided to bathe the nozzle in a pool of diesel fuel and PB Blaster...
  10. BenTerrible

    Trico Spraymaster II - About ready to toss this thing into the trash!

    Been fighting with this device all day. Can't get coolant flowing for the life of me. These things are siphon systems, which is cost-effective, I get it, but really stupid in my opinion. I would rather have a dedicated pump to push coolant and mix with air at the nozzle. I have cleaned the...
  11. BenTerrible

    Anilam Mini Wizard DRO - Scale not reading

    I believe this is an A10 system. I will grab some photos later today for clarification. The label on the scale reads "System A", the label on the readers are "A10". The DRO is a Miniwizard. Appreciate the help! Looking at new scales/readers for replacement. This might get pricey!
  12. BenTerrible

    Anilam Mini Wizard DRO - Scale not reading

    I have an Anilam Mini Wizard DRO on my Bridgeport and I am having trouble with the Y-axis readout. I fear I need to spend the money on new Acu-rite scales, but I am hoping this isn't the case. The Y-axis suddenly stopped counting. Running the Y-axis in/out, the DRO flickers. No counting, just...
  13. BenTerrible

    WTB Kwik Switch 300 Master with R8 shank for Bridgeport

    Looking for a Kwik Switch 300 master with the R8 shank so I can adapt all my tooling to my Bridgeport mill. Thanks! -BT
  14. BenTerrible

    Dynapath Delta 20 drip feeding program error "next character not N"

    Appreciate the input. If I remember correctly, Baudrate is set at 4800 currently. I was given settings when I purchased the machine. I will double check later this afternoon.
  15. BenTerrible

    Dynapath Delta 20 drip feeding program error "next character not N"

    1. Single blocking was mentioned to me by a friend of mine and yes, would take forever. I would like to know how to set this up for future diagnosing. I am guessing there should be an option in the DNC software to allow this? Or is it on the machine side as far as enabling single-blocking (have...
  16. BenTerrible

    Dynapath Delta 20 drip feeding program error "next character not N"

    Yes. My initial thought was perhaps a block is lacking "N" in front. I went through each line, found all blocks start with "N".
  17. BenTerrible

    Dynapath Delta 20 drip feeding program error "next character not N"

    I have been testing out the drip-feed via RS232 option on my Tree 325. My program is just over 5000 lines, a simple facing operation, then outside profile cut (rectangle), and lastly an engraving operation on the top face. The problem I am running into occurs a bit sporadically. Error: 131...
  18. BenTerrible

    Alzmetall AB3 ESV Drill Press Tachometer Assembly

    Hello, I recently acquired this drill press and added it to my home shop. I am curious if someone else out there has one of these older model drills with a working tachometer installed? Mine seems to be missing the factory tachometer and has a machined aluminum plug in place. I have been...
Top