What's new

Search results

  1. F

    Looking for a 14x 54 monarch

    Im looking for a monarch 14 to 16 swing lathe with 54 between centers , k or.ck , 100 mile radius of Nashville Tennessee would be great! just missed one 5 miles from my house , he was asking $3500.00 i dont know what he got for it , it sold about 30 minutes before I called ,
  2. F

    Cincinnati milacron # 2 model LL info

    I bought a Cincinnati number 2 ml few weeks ago , I weighed my truck , before and after loading the mill at a truck stop , it weighted 4470 lb,
  3. F

    Cincinnati number 2 ml horizontal milling machine parts

    I can use the dial if you have it , also the little knob on the tarverse Handle, it came with 3 aurbor supports . This machine was made in 1960 . If that helps .
  4. F

    Cincinnati number 2 ml horizontal milling machine parts

    I put up some pictures of parts needed
  5. F

    Cincinnati number 2 ml horizontal milling machine parts

    Yes , but I'm out of town for awhile I'll try and put up some pictures when I get home , thanks .
  6. F

    Cincinnati number 2 ml horizontal milling machine parts

    I bought a number 2 Cincinnati ml horizontal milling machine, and need the speed selection handle for the table feeds ,looks like someone backed into it with a forklift and snapped it off , it still works ok but I would like to have that part , if someone could tell me if parts are available for...
  7. F

    Horizontal milling machine Cincinnati #2 or sajo?

    Thanks for replying, Im going for the Cincinnati.
  8. F

    Horizontal milling machine Cincinnati #2 or sajo?

    No clutch on either machine or just the sajo ?
  9. F

    Horizontal milling machine Cincinnati #2 or sajo?

    Thanks for the reply , I have only one aligning Job to do so I don't want to have much in one of them ,
  10. F

    Horizontal milling machine Cincinnati #2 or sajo?

    I'm looking for a horizontal milling machine, have found a sajo and a Cincinnati #2 dial model 1960 , in my area ,both machines are in similar conditions the sajo is 100 miles closer to me , just would like to get a option as to which one is the best option I have no experience with either or a...
  11. F

    Parts for the older mitutoyo dro

    Thanks , I never thought about an adapter!
  12. F

    Parts for the older mitutoyo dro

    Really didn't know where to post this so thought some of you might have one of these old 1980s Bridgeport high school mills with the mitutoyo dro on it , with the round 6 pin connection , I need a linear scale for it 1150mm ( 45 inch) or so , to move this dro over to my south bend 6ft, lathe ...
  13. F

    Making a chamber reamers

    update relief was the problem ,lots of info in 3rd bedside reader on this . i turn the base shape on lathe leaving .020 larger overall ,move to the mill cut the fluts with a 60 deg cutter then harden , go back to the lathe and grind to final size with a tool post grinder , i sharpen with...
  14. F

    Making a chamber reamers

    Looks like mine anyway, I think your right it's relief I'll give them another try, most of my gunsmithing is one off , can't really buy a lot of reamers just to lay around , thanks to all,
  15. F

    Making a chamber reamers

    did you cut the flutes above or below center? i cut these .010 below . on the mill i used a 90deg. stone with flood . 0n the surface grinder i used a 60 drg. cone stone. with mist. thanks for all replies good info advise. ill see what i can do with it.
  16. F

    Making a chamber reamers

    If you had 1000.00 to by a machine to make chamber reamers what would you buy ? I already have mill, lathe, od grinder, surface grinder. So far I have turned the stock on the lathe, hardened, cut the fluts on the mill with a stone didn't like it. try surface grinder so so . Neither of these cut...
  17. F

    Trouble with a 3 phase rpc

    I give that a try tonight when I get home , also i see a item that says remove wire c. When using a cpt switch. I read some where that I would get a faster headstock stop time ,if I were running actual 3phase from this rpc , than I would from just the vfd. Thanks for the help and the time you...
  18. F

    Trouble with a 3 phase rpc

    [QUOyes I agree, I'm going to work on it tomorrow night when I get home I'm sure there's a wire in the wrong place somewhere . Thanks for all replys.TE=JST;2717561]So the issue is most likely to be a problem with the PB hookup, or possibly a bad PB. Wiring problems are much more common than...
Top