What's new

Search results

  1. N

    For Sale - OneCNC XR8 Mill Expert w/4th Axis and XR8 Lathe Express CAM

    Hello, I am selling my One CNC Cam system. I have the new XR8 versions both in Mill and Lathe, including the 4th axis module for the mill. * OneCNC XR8 Mill Expert * OneCNC XR8 Mill 4th Axis Module * OneCNC XR8 Lathe Express This is a fully licensed seat and the transaction can go through...
  2. N

    Video - Brother Roughing Aluminum

    Well, something tells me you wouldn't believe it no matter what. Personally, for me I was very impressed with what my removal rate was. I tell ya what, I'll go through the work and time to set that video up for you. But first, I'd like to see a video of your machine tapping at 6,000rpm...
  3. N

    Video - Brother Roughing Aluminum

    Thanks. Those clamps are home made, or should I should shop made. Here is another video that shows them better, with the tombstone all loaded up. Brother S2Dn-O Loaded Tombstone
  4. N

    Video - Brother Roughing Aluminum

    CaptDave, I really couldn't be happier with this machine. It has done everything they said it would. One of the parts I do used to take 16 minutes and 5 ops. Now it takes 3 minutes and 2 ops. I can't speak to your 1" drill, I do a lot of 1/4-5/16ths stuff and with those I'm running 10k rpm...
  5. N

    Video - Brother Roughing Aluminum

    Are you talking about the very first op? That is a conventional pocketing op where I am just machining off the material blank, it is ramping down to depth and that's probably what you are talking about? If so, I realize it isn't very optimized. Then the second op is facing. The 3rd op is the...
  6. N

    Video - Brother Roughing Aluminum

    Hey guys, Just wanted to share a video I shot of my Brother S2Dn-O roughing aluminum. It's a new machine for me and the first time I really had a chance to see what it could do. I know there are some skeptics out there, from reading my original new machine day thread. Anyways, here you go...
  7. N

    CNC Reaming 6061T6 - How To Get Rid of Stringy Chips ?

    Thanks guys, I'll give it a shot!
  8. N

    CNC Reaming 6061T6 - How To Get Rid of Stringy Chips ?

    Gents, I'm loving my new machine but need some help with reaming. I'm reaming a .750" blind hole in 6061T6. I'm roughing the hole with an endmill and leaving .020", the hole is 2" deep. The reamer is a spiral 8 flute. I'm running 1,000rpm and 25ipm feed. The finish is fine, no chattering...
  9. N

    VMC Rotary Table Tombstone

    I got the 6" riser installed with my machine. With this rotary setup I get a 16" diameter x 27" work envelope.
  10. N

    VMC Rotary Table Tombstone

    I built one for my newly acquired Brother.
  11. N

    New Machine Day.....Say Hello To My New Brother

    Gents, I'm getting my tombstone all set up, just about ready to start making chips. I did a quick video, thought I'd share it. These machines are incredibly fast, to say the least. I also have the G100 post working perfectly now and to see the rotary table move, the X and Y table move, as...
  12. N

    New Machine Day.....Say Hello To My New Brother

    Actually just finished everything today, had to mount the rotary table and hook up the chip conveyor. I think I'm gunna love the coolant tank, I put @ 50 gallons in it. Here are some pics. For my rotary setup I will be adding two pieces that index/bolt onto the rotary plate that in effect...
  13. N

    New Machine Day.....Say Hello To My New Brother

    I would except I don't know what G77 is invoked by, give me a clue.
  14. N

    New Machine Day.....Say Hello To My New Brother

    Well, thanks to the OneCnc guys, I got my post working with the G100 as well. It's really cool seeing the table move to it's next XY position "during" a tool change. These things are blisteringly fast! For you visual types like myself, here is another good video for the brothers. This one is...
  15. N

    New Machine Day.....Say Hello To My New Brother

    Made from scratch. I designed it, had the parts laser cut, bent and assembled it. Now I know why those darn things are so expensive but I'm glad I did it, turned out real nice.
  16. N

    New Machine Day.....Say Hello To My New Brother

    hey guys, Just thought I'd share some progress. I recieved my LNS microfine scraper coolant tank and chip conveyor today, will hook it up tomorrow. The coolant tank is huge! I also finished making a couple of tool caddys, thought you might like. I made one caddy for the brother and one for...
  17. N

    New Machine Day.....Say Hello To My New Brother

    Hi guys, thanks! Been busy getting it all set up and putting my 4th axis rotary table on. I'll have some more pics soon. I just started trying to get my post to work (using OneCnc) and was planning on talking with Yamazen on the G100 tool change. If anyone is also using OneCnc with a...
  18. N

    New Machine Day.....Say Hello To My New Brother

    Gents, Big day here, finally received my new machine. I bought a Brother S2Dn-O with a Yukiwa 4th axis rotary table. More pics to come, just wanted to share. cheers!
  19. N

    Femco HL25 Lathe - Durga Turret - Error Code - Anyone know about this?

    I guess there's not too many Durga users out there....
Top