Search results

M
Mazak Super Flow coolant how to use?

I have never used the high-pressure coolant before, anyway we have one machine that includes high pressure-coolant pump we run M 131 M100 to 106 to control the pressure. I plan to use the high-pressure while drilling. As first time we use it. Is there anything related to safety need to be...
- M Code
- Thread
- Feb 15, 2023
- Replies: 1
- Forum: CNC Machining
M
Peck drill cycle while drilling by carbide

I am using a carbide drill on 4130 material with high feed and speed, everything is ok and the chips are flying away, but with that we still use a peck drill cycle 1- I am wondering does the peck has any benefits while drilling by carbide? 2- Will the peck cycle hurt the tip of the drill...
- M Code
- Thread
- Feb 13, 2023
- Replies: 11
- Forum: CNC Machining
M
Difference between cylindrical boring bar and boring bar with flat

Thanks, I meant if I install the boring bar inside a socket where the socket is mounted on the turret, this boring bar needs to be flat so it can be hold with the screw? PITA you mean like easyfix from Sandvik ?
- M Code
- Post #3
- Nov 19, 2022
- Forum: CNC Machining
M
Difference between cylindrical boring bar and boring bar with flat

Hi 1- What is the difference between boring bar with flats and the cylindrical one? 2- If I use CNC turning tool where I mount the boring bar using socket the boring bar should be with flats? Thanks.
- M Code
- Thread
- Nov 19, 2022
- Replies: 12
- Forum: CNC Machining
M
Can I use ISO thread insert to do UN thread?

it's laydown insert
- M Code
- Post #3
- Nov 7, 2022
- Forum: CNC Machining
M
Can I use ISO thread insert to do UN thread?

Can I use ISO (metric) standard thread insert to do UN thread?
- M Code
- Thread
- Nov 7, 2022
- Replies: 4
- Forum: CNC Machining
M
Cycle P9814 for Mazak

I want to use P9814 cycle to measure the ID not for updating the work offset. If the cycle was done, where can I find the value of the measured ID in Mazak controller? Thanks...
- M Code
- Thread
- Oct 25, 2022
- Replies: 2
- Forum: CNC Machining
M
Renishaw Inspection Plus software for Mazak

Thanks you so much sir The question now if we use G65P9901M***.C***.X**.Y***D***5S***. and G65P9814D3.0 S1.0 is the first one belongs to Go probe and the other one for another method?
- M Code
- Post #4
- Oct 23, 2022
- Forum: CNC Machining
M
Renishaw Inspection Plus software for Mazak

Hi For VCN machine we have Renishaw Inspection Plus software, however in Fanuc I use probe cycles for updating the WCS i was building the cycle starting from select the WCS and positioning then protected move after that start the cycle, that the usual way I was doing in Fanuc, in Mazak new...
- M Code
- Thread
- Oct 21, 2022
- Replies: 4
- Forum: CNC Machining
M
Boring ID jaws

the size that I turn = the size of workpiece ID the chuck is clamped in reverse?
- M Code
- Post #4
- Oct 9, 2022
- Forum: CNC Machining
M
Boring ID jaws

I want to clamp 6.5" on ID. So, to turn the jaws do I change the chuck clamp to ID and I turn the jaws till 6.5" ?? is this the way?
- M Code
- Thread
- Oct 9, 2022
- Replies: 4
- Forum: CNC Machining
M
Face groove tool for large diameter

https://www.kennametal.com/us/en/products/p.beyond-evolution-integral-toolholder-face-grooving-external-through-coolant-metric.6124696.html#tad
- M Code
- Post #6
- Sep 26, 2022
- Forum: CNC Machining
M
Face groove tool for large diameter

if the groove wide is bigger that's will be fine I will I start plunge within limits then will increase until final dia. but as I understand face groove tools have limits (upper dia. lower dia.) and this needs to be considered
- M Code
- Post #3
- Sep 26, 2022
- Forum: CNC Machining
M
Face groove tool for large diameter

I am doing a face groove on VTB where the large dia. is 40.5" and 0.5" wide, 0.3 depth. Is there any suitable tool (square shank) allows me to do that face groove? largest tool i found allow me to do until 39" big dia.
- M Code
- Thread
- Sep 26, 2022
- Replies: 9
- Forum: CNC Machining
M
Tool offset while using G41

what do you enter in your machine offset if you run G41 and the program follow actual path the diameter or radius?
- M Code
- Post #3
- Sep 22, 2022
- Forum: CNC Machining
M
Tool offset while using G41

Hi If I use G41 the geometric tool offset value will be the radius of the tool, I saw some machines they use the diameter in the geometric tool offset while using G41 I want to understand how they use the diameter ? is this related to the machine or programming way? Thanks
- M Code
- Thread
- Sep 22, 2022
- Replies: 9
- Forum: CNC Machining
M
Integrex and 2nd spindle as tailstock

That's really good to know. what about the accuracy with that way? is it helpful when machining accurate parts?
- M Code
- Post #3
- Sep 12, 2022
- Forum: CNC Machining
M
Integrex and 2nd spindle as tailstock

We have Integrex machine with sub-spindle that come with W-axis thrust feature which can works as either live/dead center. I don’t have experience on that so my plan is to work with that as dead center where RB54= bit 0 Just to ask regarding the way to attach the center to chuck: Soft jaws to...
- M Code
- Thread
- Sep 12, 2022
- Replies: 3
- Forum: CNC Machining
M
UNS and UN thread

Is that mean I can use 8 UN insert + 8 UN thread roller gage?
- M Code
- Post #3
- Sep 8, 2022
- Forum: CNC Machining
M
Integrex and spindles sync

what will happen to the machine if the operator clamp both spindles (main & sub) on the workpiece and start rotate them tougher (using the manual override not M code ) without sync them ( use M511 or M512) ?
- M Code
- Thread
- Sep 5, 2022
- Replies: 0
- Forum: CNC Machining