Search results

S
I/O Board M Code Help

BrotherFrank, Thanks for the detailed response! I have installation manual for S2B and Yukiwa and I have to dig through them in more depth as certain info may be in one section/manual and the others in another (operators and installation manuals for the Brother for example) Your post clarified...
- SwiftDesignworks
- Post #17
- Nov 29, 2019
- Forum: CNC Machining
S
I/O Board M Code Help

Already figured out some of my own questions FN1 is an output from Yukiwa, so this should be into terminal 52-60? AST is input to Yukiwa so this should be from terminal 103-110 INCOM should be 50 or 51? OUTCOM should be 101 or 102? Do these need a relay on FN1???
- SwiftDesignworks
- Post #15
- Nov 28, 2019
- Forum: CNC Machining
S
I/O Board M Code Help

thread back from the dead! I have an S2b (2005) with the last of the a00 controls and am looking at using the (8) i/o as shown above to signal with 24v to a yukiwa rotary indexer with the ac3-10 control box. I don't have any ice cube relays as shown above. Is this machine still NPN? I guess I...
- SwiftDesignworks
- Post #14
- Nov 28, 2019
- Forum: CNC Machining
S
Small dovetail vise for 4th axis

Hey all, I have a few runs of parts (6061)I need to machine on my Brother with a Yukiwa 4th. They will require (for my sanity in minimizing setups) 3ops with a 4th for the first 2. Instead of making a fixture using pitbulls I've been really tempted to get a small dovetail vise Looking at the...
- SwiftDesignworks
- Thread
- Nov 20, 2019
- Replies: 7
- Forum: CNC Machining
S
older robodrill with modern toolpaths?

That prototype used a helical pocketing roughing strategy and then a circular pattern with a ballnose at I think a .09" stepover just for a demo and isn't how I'd normally rough. This also isn't the parts I make 1200 of....yet Thanks for all the replies everyone!
- SwiftDesignworks
- Post #14
- Sep 17, 2019
- Forum: CNC Machining
S
older robodrill with modern toolpaths?

MTB with version for road and cx as well ;)
- SwiftDesignworks
- Post #11
- Sep 13, 2019
- Forum: CNC Machining
S
older robodrill with modern toolpaths?

I'd be curious to learn more about your setup as far as software to get the programs into the robodrill.
- SwiftDesignworks
- Post #6
- Sep 11, 2019
- Forum: CNC Machining
S
older robodrill with modern toolpaths?

Hi all, Looking at older early 2000's robodrills and other smallish vmc's. I have been running small production on a borrowed Haas TM1p with a 6k spindle and am looking to bring things in house for prototypes and small production runs up to about 1200 parts. Mostly aluminum, some chromoly and...
- SwiftDesignworks
- Thread
- Sep 10, 2019
- Replies: 14
- Forum: CNC Machining
S
SolidWorks Coordinate system issues

Ive seen this issue when the graphics card is working overtime. Do you have anything else running? Half of all the issues I see with selecting edges or surfaces in Solidworks are due to me running youtube, email, 3 browsers, and 12 assembly files open.
- SwiftDesignworks
- Post #9
- Aug 17, 2019
- Forum: CAD / CAM