What's new
What's new
By:
Advanced search…

Search results

  1. V

    Hitachi Seiki HT20 Motor alarm

    I will have the new ones tomorrow. I will report back when I get them Installed. Thank you for your Time, I appreciate your help.
  2. V

    Hitachi Seiki HT20 Motor alarm

    Yep the AC input is good.
  3. V

    Hitachi Seiki HT20 Motor alarm

    I have probed those. Whether I probe there or the test pins or directly at the power supplies. I might get 3V or -3V then It dissipates to nothing.
  4. V

    Hitachi Seiki HT20 Motor alarm

    I'm testing at those points and get nothing
  5. V

    Hitachi Seiki HT20 Motor alarm

    Its a Micon-8 Model 2
  6. V

    Hitachi Seiki HT20 Motor alarm

    Yes Sir, I get that and I already have a set ordered. It just seemed odd to me that they would both fail at the same time. The 24V supplies are good. The Micon-8 shows LED1 Lit Red. and LED4 Lit green. LED1 is a battery low alarm. LED4 strangely enough is ON/POWER SOURCE +5V. I can't quite...
  7. V

    Hitachi Seiki HT20 Motor alarm

    Well, the DC power supplies mentioned above feed the Micon-8 CPU Board. So are you saying the board probably took out the power supplies?
  8. V

    Hitachi Seiki HT20 Motor alarm

    So we have a Hitachi Seiki HT20 Lathe with a Fanuc 3TF control. Yaskawa Spindle Drive. Running fine and this morning I came In and fired It up. Put It In warmup and walked away. Came back and I have the Red Motor LED on the control Lit. Machine In the Not ready state. Nothing tripped. It has two...
  9. V

    Rant: Customers don't follow their own tolerances

    We are. If we don't we will get rejected. Often times our parts must clear 3 different Inspection rooms all together. I put the Minor Ø call outs on every drawing that has an Internal thread, and Likewise I put the Major Ø call outs on every drawing that has an external thread. That way nobody...
  10. V

    Rant: Customers don't follow their own tolerances

    As far as #1 goes If the minor Ø is good and the hole gages good with the thread plug gages. The part is good! If they want a different thread fit they should spec It on the print. We read prints here not freaking minds. #2, They can't dream shit up after you've quoted and manufactured parts to...
  11. V

    Census Bureau for Business

    I been hearing about em for 3 or 4 years now. But never actually seen one. Must keep getting lost In the mail. You know USPS ain't what it used to be.
  12. V

    RIGID TAPPING FANUC OiMD - CHEVALIER

    If your machine is equipped with Rigid Tapping you don't need a floating holder. Rigid Tap N10G17G80G40G90G49G0 M45T10( #4-40 CUT TAP ) G90G57 G90G0X0.Y.79 G43Z.1H10 M08 M29S750 G84G98X0.Y.79Z-.25R.1F18.75 G0G80Z.1 M09 G91G28Z0. G0G90G53X0.Y0. And If It Isn't you will need a floating holder...
  13. V

    Ideas for Machining this profile?

    So I'm looking around at these machines a little. Might be a worthwhile way to go for production. Looks like a #3 would be plenty big enough for this part? What do you think?
  14. V

    Ideas for Machining this profile?

    The profile has been proved out. So I'm as sure as I can be about that. However, we all know, nothing Is set In stone.
  15. V

    Ideas for Machining this profile?

    I agree with the push/pull broach for larger qty. I'm still steering away from the parting off Idea though. Our first Inquiry was a Rotary Broach.This is what I was told. "The form looks good for Rotary Broaching! However due to the material and size form, the pressure required to create it...
  16. V

    Ideas for Machining this profile?

    What about tooling? You'd have to have something made I assume. I have had a static broach quoted that would allow us to broach it In a mill with a rotary. About $700 by the time you buy the broach and the holder.
  17. V

    Ideas for Machining this profile?

    They could probably be stacked. At least that would be more productive than burning one at a time.
  18. V

    Ideas for Machining this profile?

    I'll elaborate a bit. There is more to the part. But I can't post the whole thing. Basicly It doesn't lend to burning the profile In a long cylinder and parting off. The part is only partially round. But the profile could still be wired, you would just have to do them Individually. If you...
  19. V

    Ideas for Machining this profile?

    Looking for Ideas on ways to machine this profile. The material is 303SS. Qty. could be anywhere from 4 - 100. Much larger down the road. The part is .400 Thick and It is a thru hole. We have some Ideas of our own. But would like to hear how others might do this. Your Input Is appreciated.
  20. V

    CHIRON FZ 16 FANUC 10

    I have the 8000,9000 programs for an FZ08W. If you think that might help I can send then to you. Have you talked to Chiron?

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

LATEST INDUSTRY NEWS

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2021 Copyright Practicalmachinist.com. All Rights reserved.

Top