Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
T
Rough finish on a Grizzly G0602 Lathe
Basically, needed to add more info and be more specific from the first post- [email protected]
- Post #3
- Forum: General
-
T
Rough finish on a Grizzly G0602 Lathe
Hello, I have a Grizzly G 0602 lathe about six months old. It is mounted on the optional workbench with splash guard, leveled. This little lathe cut great in the beginning, glass smooth cutting C1018 or stainless or bronze using either HSS or carbide. I changed out the tool holder to a quick...- [email protected]
- Thread
- Replies: 6
- Forum: General
-
T
rough finish
I am cutting 1018 and 416 both have the same issue.- [email protected]
- Post #3
- Forum: General
-
T
rough finish
One this i noticed in the four jaw is that after about 10 minutes i have to dial it in again but even at the start i get rough finishes when it is still dialed in.- [email protected]
- Post #2
- Forum: General
-
T
rough finish
Hello, I am new to this forum and am hoping for some help. I am running a small Grizzly G0602 lathe. When i first got it it gave a mirror finish using either HSS or Carbide. this was from 0 hours to about 5 hours on the lathe. I decided to switch to a quick change tool post and the finish go a...- [email protected]
- Thread
- Replies: 6
- Forum: General