What's new
What's new
By:
Advanced search…

Search results

  1. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    Yeah if I'm hand writing I do what you just stated, the cam software has a default feed plane of .2 and a default clearance plane of .400 above the feed plane. The .062 was the stock to be faced off and it applies all those defaults to the programmed stock face.
  2. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    I write and read gcode code as well for both my mills and lathes but I also use CAM on our regular products that I have my employees run. I use fusion 360 and they don't have the exact post processors for all the machines I have, I have had to edit my post many times and this was just another...
  3. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    M74 is spindle reverse rigid tap, and again it's just and output from the cam software. The code runs and that's all that matters
  4. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    They got back to me, it need to be this and it worked like a charm! N4(.375-16 TAP) G28 U0. M39 G54 G99 G18 M29 T0505 M08 G00 Z0.662 X0. G00 Z0.262 M74 G97 S100 M79 G84 Z-0.8 R-0.062 F0.0625 G80 G00 Z0.662 G28 U0.0 M9 M5 M00
  5. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    Will do!
  6. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    i am from wisconsin, i do have message left with them right now, thanks anyway!
  7. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    Yeah cam software always puts out more code than you need, but i tried yours and no luck, I also tried the M89,G74,G84.1 ,G84.2, this is a lathe also if i hadnt mentioned.
  8. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    M29 is used to turn off milling mode on this lathe so its not the standard Rigid tapping code.
  9. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    % O1001 G00 G40 G80 G99 G20 N1 G28 G28 U0. G54 G99 G18 M29 T0707 M08 G00 Z0.6 X0. G80 G00 Z0.2 G97 S100 M79 G84 Z-1. R0. F0.076923 G80 G00 Z0.6 M05 M09 G00 G28 Y0. G28 U0. M29 M30
  10. B

    Hwacheon Lathe Fanuc Oi-T Rigid tapping in reverse?

    Hi i have a Hwacheon Cutex 240 with live tooling/subspindle and when i try to use the Main spindle to rigid tap it goes counter clockwise feeding into the part and then clockwise reversing out of the part? How can i reverse that order so i can to right handed taps? Thanks to any one who can help!!
  11. B

    Shop rate for Boring mills in Midwest

    yes we have a 40 ton crane as well as jib cranes, we have the machine in a bay with 40 feet in front of it and 20 feet next to it open. we have a smaller boring mill currently but its so old ( has a General numeric control) that i just dont feel like it can be quoted as a "boring mill" its a...
  12. B

    Shop rate for Boring mills in Midwest

    Were starting to get in to larger work for our own production needs and are looking at buying a CNC boring mill. a Kuraki with full rotary table. has travels around 70 inches. Whats a shop rate you guys normally charge for a machine like this? Im comfortable quoting work on VMC's and lathe with...
  13. B

    Deburring part off tool burr on thin rings?

    Hi guys, I have 1000 rings to make on a lathe. .940 O.D x .677 I.D and .06 thick. Making the part is easy. But deburring is slowing the process down. Currently we're using a pencil grinder because they're so thin its hard to use whirly knives or debur with a countersink. And it's so thin with a...
  14. B

    Key seat dimensions from an odd callout.

    I did ask because it was 17 inches long, so I know the width is 1 inch wide and im guessing the depth is as mtndew has stated for the 1/2 depth on the wall. But it didn't call out a sled runner radius so I figured I'd just go to the source. Thanks guys!
  15. B

    Key seat dimensions from an odd callout.

    I have a print that calls for a 1x 1/2 standard keyseat. What is the actual keyseat depth for a callout like that, I dont see anything in the machinery handbook for keyseat called out that way. Thanks in advanced
  16. B

    Looking for Daewoo 4020 manual

    Thanks. I did get in contact with them
  17. B

    Looking for Daewoo 4020 manual

    Hey guys i was wondering if anyone had a maintance manual, programming manual, electrical manual to a Daewoo DMV4020LS manual they could send me? its a 2006 Fanuc 21i-Mb control. Thanks in advanced
  18. B

    Aligning features inside spindle bore

    I'll have to try the pulling it out and reclamp. Sub spindle doesn't have c axis though
  19. B

    Aligning features inside spindle bore

    I have a sub spindle and I don't think I've got enough z axis length to do it in one shot
  20. B

    Aligning features inside spindle bore

    I was curious what you guys have come up with as far as ideas on how to align features from one side of a part to the other on a lathe with live tooling. I need to keep two holes in line with each other on a 1.5 inch diameter pin. 12 inches long. Each hole is .500 from the end of pin.

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2024 Copyright Practicalmachinist.com. All Rights reserved.

Back
Top