What's new
What's new
By:
Advanced search…

Search results

  1. Anthony Howe

    Dynatorch 5x10 table with Thermal Dynamics Ultra-Cut XT-100 for sale

    I have a powerful fan used to remove the plasma dust in a dedicated room so the mess will not be an issue. With both axis free the router could take off and bite more than it could chew for sure. Just like milling a piece of aluminum fed the wrong way too fast into the bit. Ouch! Thanks for the...
  2. Anthony Howe

    Dynatorch 5x10 table with Thermal Dynamics Ultra-Cut XT-100 for sale

    Keeping the table and mounting a big router on it to flatten some 4x10 big leaf maple slabs I have. Took all the electronics off it and lubed up the bearings to it slides like a greased angel from an oil patch.
  3. Anthony Howe

    Dynatorch 5x10 table with Thermal Dynamics Ultra-Cut XT-100 for sale

    Plasma machine sold today. The table is still available and would make an excellent wood slab router flattener.....
  4. Anthony Howe

    Dynatorch 5x10 table with Thermal Dynamics Ultra-Cut XT-100 for sale

    OK, I will sell the Thermal Dynamics Ultra-Cut XT-100 Plasma machine for $1,000.00 and the table for the same, $1,000.00. Separately if desired. Pickup only. Thanks.
  5. Anthony Howe

    Pullmax D-3 for sale

    I have another larger machine I use to do a myriad of things - from making spheres to shrinking and stretching to forming edges, patterns, etc. "The things you can make/do with it are only limited by your imagination". I paid $2,500.00 for it thirty years ago off a Tacoma scrapyard. Had an...
  6. Anthony Howe

    Pullmax D-3 for sale

    I have ripped 3/16" 304 s.s. with it.
  7. Anthony Howe

    Chinese Laser Welder

    Thank you for your input Emanuel.
  8. Anthony Howe

    Orcas Island

    Orcas Island
  9. Anthony Howe

    Dynatorch 5x10 table with Thermal Dynamics Ultra-Cut XT-100 for sale

    Dynatorch 5x10 table with Thermal Dynamics 100amp Ultra-Cut 100XT plasma. $2,750.00. Lightly used. Lots of extra cutting tips. You can also use it with a hand held torch. 460VAC 3/phase. Also has an industrial scroller on its head. Your disassembly required but there is a forklift to assist. (it...
  10. Anthony Howe

    Pullmax D-3 for sale

    Pullmax Nibbler D-3 $2,750.00. Includes circle cutter attachments and on and off-center die holders (rare). Ripping guide. Weight is around 2,000lbs. 220VAC 1/p 5hp. Forklift on hand to lift it into your truck. No shipping. Pacific NW location= Orcas Island.
  11. Anthony Howe

    Chinese Laser Welder

    I sent an email to Tim asking him to explain the shocking difference in prices. We shall see…..
  12. Anthony Howe

    Chinese Laser Welder

    Big K, I bought a Varibend 2k machine (same as Varisign) for 20k two years ago and you paid 12k for the same machine? This is a little bit of a surprise. Have their prices come down by 8k in two years? I thought they were an upstanding outfit and I have been thinking of purchasing a CNC laser...
  13. Anthony Howe

    Chinese Laser Welder

    I've been using a Chinese Varibend 2k machine (cost 20k delivered) for two years and I rarely pick up my tig torch and almost never my mig. My stuff is mostly under 3/16" 304 ss so I rarely need more penetration than this machine has. I could not live without it. The only consumables are...
  14. Anthony Howe

    Nitrogen for plasma cutting aluminum?

    Don't ya just love all those nifty consumables you get to acquire for your fancy smancy HD plasma cutter? With all the tiny model numbers you get to read to figure out what goes with what? At what thickness? When my Thermal D XT-100 was being installed by Dynatorch I asked the technician which...
  15. Anthony Howe

    Nitrogen for plasma cutting aluminum?

    That's pretty cool. Straight from the horse's mouth. How could you go wrong?
  16. Anthony Howe

    Nitrogen for plasma cutting aluminum?

    My Hypertherm HD XT-100 machine seems to cut aluminum about the same with or without N2 @ 99.99%. The amount of effort required to supply it with N2 would seem prohibitive unless you were going to do a lot of it. On stainless it's a different story and it doesn't have to do with the quality of...
  17. Anthony Howe

    Opinions on laser welders

    I have two Sunstone jewelry welders that have always worked as stated for the last fifteen years - they are now more or less superseded by the Varibend fiber laser which can be set to any level up to 2000 watts. However, if you are doing really tiny stuff the Sunstones are the right machine.
  18. Anthony Howe

    Laser Plate and Tube Cutter Combo

    I have a 3D Fablight 4k pulsed fiber laser that plugs into a 115VAC socket that cuts stainless sheet up to 3/16" and tubes to 2" in diameter. Cost was about 115k delivery included. I also have an N2 generator on site delivering @ 99.99% @ 140psi. soon attaching a booster compressor to store N2...
  19. Anthony Howe

    Stainless Passivation - Tig Brush vs Acid?

    Here's ten for $3.70 each.
  20. Anthony Howe

    Stainless Passivation - Tig Brush vs Acid?

    Enjoy seeing a picture of your wand if possible. There's always something to be learned from each success (or failure). The ultimate goal would be a brush that can be small yet able to carry lots of amps. I'm using my foot control to turn the current on once the brush is in contact with the weld...

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2024 Copyright Practicalmachinist.com. All Rights reserved.

Back
Top