its been years since i bought my 10L and i thought i had the adapter that fits in the head stock spindle to adapt to morse taper
number 3 iirc, maybe number 2?
anyway iirc there was once available this piece and i would like to know where one gets something like this so that i can turn
a...
this is a muzzle loader, and i want to rebore to a larger caliber
can i use one of those eldorado v grooved rifle bits to rebore an existing hole in a barrel?
yes i have a lathe and have bored barrels in the past with a fabricated twist drill to to the deal, but wonder if the carbide tipped...
do i need a cdl to drive a 32k lb box truck, to move my personal household stuff across country.
i know i don't need one for 25,999 and below, whether my stuff or for hire, however i am a bit out of the loop on the heavier trucks.
if i need a cdl what class? i assume class B?
what all is...
once upon a time one could go to a wrecking yard and pickup a ford 2.3, or a gm 2.5
for 400 to 500 bucks, low miles, good compression, oil pressure and some sort of warranty.
well that has been a few years ago i guess, as the 2.3 and 2.5 engines are kind of long in the tooth now,
what i am...
i have a small project, but have no way to produce it myself
what it is
a hot plug for an IDI diesel engine cylinder head,
it is presumably made of stainless, is approx 1.3 inch in diameter, approx .25" thick
and would have three ports machined through it, each about .2" in diameter offset...
i am looking to have to make a career change due to health issues, i am also at the point in my life that i have been able to save up a small bit of money and have all the tooling i need except a suitable and appropriate sized mill to mate up to the sb heavy 10 i already have.
i am looking to...
just saw this little bugger come up on craigslist
not it is not mine, and i don't know anything about it
however it looks to be quite small
Small Milling Machine Childs 0000
for the guy that has almost no space available i suppose
bob g
i know nothing of rivett lathes other than there is some interest here in them
i also have no connection to this machine, or its owner, but
figured i would pass this along
Rivett 918 2nd Operation Lathe
looks fairly well appointed
bob g
not sure what you call them, but they are used in electrical boxes as lock nuts
i have seen them down to 1/2 inch pipe size, but so far can't find them down to 3/8
pipe size.
they are the little thin nuts you use to lock down emt fittings inside the metal junction boxes
they are also sometimes...
call me a skeptic, call me an unbeliever, call me whatever you like, but
i just can't get my head around this dowsing/well witching thing.
i am faced with putting out some hard cash (all cash is hard these days it seems) to drill a well on a piece of property i plan to build a small home on...
everyone has heard the story about the 1953 corvette in some old ladies garage and some guy buying it for 500bucks, so here is my story
i had first grab at this one, and passed on it because i already have a nice example with a flame hardened bed and it is in pristine shape, but
still for a...
trying to find out about how hot 304 stainless has to get before it turns dark blue
anyone have any idea? my hope is it is well over 600 degree's F before it turns blue, but i don't know for sure.
thanks
bob g
http://seattle.craigslist.org/tac/tls/1442893784.html
it just looks massive for being only a 12" lathe, or is it 12"
from the spindle center to the bed?
any idea what this baby weighs?
bob g
i realize this is likely an odd request, i am looking for some
curly swarf about the consistancy of a pot scrubber and a 5 gallon
pail in volume of stainless steel.
it is for a prototype diesel particulate filter i am working on, and i have no clue as to who might have some of this laying about...
ok here is the deal, and i don't know if this is the right place to
do this, hopefully i won't raise the ire of our leader.
as most folks i have varied interest and belong to a couple other forums (i know, as hard as it is to believe) however this is the only
machinist forum that i belong to...
ok fella's i want to build a forum
not a machining forum or a machine tool forum, totally unrelated to
this site but perhaps of interest to a few here,, "microcogeneration"
i need about a dozen sections, pretty much a basic forum that might handle upwards of a 1000 members
what i want will be...
i bought 12 of an item, for 1000 bucks plus 125 for shipping
i received 2 of the item so far
the seller is spotty at best with communications, we found what happened was my order went to a guy down south 12 units
and i got his 2 units.
the seller told me he would send out the balance of my...
i know well how they work, and all that
what i am looking for is a more current text on
alternator design, something very indepth and that gets
into all the math, materials, and other design considerations.
an engineering text so to speak
i would expect it to sell in the 200+ dollar range,
i...
one of our customers who happens to be a drywall wholesaler has a fleet for boom trucks and pup trailers
we get a call down to the yard for a repair to the pintel hook
now bear in mind this is a full size twin axle pump that likely is loaded to 30k lbs most of its life.
the tounge is made of...
i picked up a miller spoolgun (sg100?) it is new and never used
and is made to fit either the miller 140 or 180 mig
i want to mate it to a hobart handler 120, so i know i will have to hack
into the circuitry and come up with a receptical for the 4 wire plug.
anyone ever done this sort of...
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.