10ee apron handwheel knob dimensions

[Leowren]

I’m working on a 1950 10ee and need a sketch of the handle for the apron handwheel- can anyone provide a quick sketch of the dimensions? I got this wheel from monarch and it has no handle or hole for one- thought I could just make one but would like it to be the correct size. Thanks for any help-

 

[tailstock4]

I’m working on a 1950 10ee and need a sketch of the handle for the apron handwheel- can anyone provide a quick sketch of the dimensions? I got this wheel from monarch and it has no handle or hole for one- thought I could just make one but would like it to be the correct size. Thanks for any help-

My 10EE knob was a solid type. I replaced it with a revolving type which is my preference. It is 2” in length with a 5/16” press fit stud. I’ve posted a link to my source for this revolving handle. It also has the dimensions.



ELCO Inc, Pressed Fit Steel Handle, FR-1
https://www.elco-inc.com/products/steel-handles/


I also added one of these FR-1 revolving handles to the tailstock handwheel.