What's new
What's new

12” CK Lower Compound Lever

Jwillis44

Plastic
Joined
May 17, 2022
I’ve got a 1943 Monarch 12” CK. Has a broken “A/B” lever. #5 in the manual. Also missing the left oil reservoir cap. Thought I’d throw it out into the either and see if anyone may have some spare parts kicking around.

First Post!

Thanks,
Joe
 

BoreNH

Plastic
Joined
May 21, 2022
Not to hijack the thread.I have a 12"C and a 12"CK both are 36".Saved from the scrappers, there is enough there to make a good one but no compound rests on either.
 

johnoder

Diamond
Joined
Jul 16, 2004
Location
Houston, TX USA
Handles can be made. The oil cup is attached to seven or so oil tubes

Shaper handle I made
 

Attachments

  • DCP_0637.JPG
    DCP_0637.JPG
    85.3 KB · Views: 5
  • DCP_0638.JPG
    DCP_0638.JPG
    73.8 KB · Views: 4
  • Dcp_0639.jpg
    Dcp_0639.jpg
    93.7 KB · Views: 4
  • Dcp_0640.jpg
    Dcp_0640.jpg
    93.7 KB · Views: 5

Jwillis44

Plastic
Joined
May 17, 2022
I make a handle was just hoping for a matcher. not a big deal, the other thing is the way the pin locks into the holes, I guess I can just use bolt extending out past the handle and screw it in if it wants to move. Those look nice John.
 








 
Top