What's new
What's new

2000 Takumi Seiki V22AY machine for sale

HiNi

Cast Iron
Joined
Jun 22, 2010
Location
Southeast, USA
We have a 2000 Takumi Seiki V22AY machine for sale.
We are selling due to lack of space and we had to take this one offline to make room for a new HMC.

X-Axis Travel ………….. 86.6″
Y-Axis Travel ………….. 42″
Z-Axis Travel …………… 29.5″
Table Size……………………….86.6″ x 40″
Max Table Load……………………..6614 lbs
Dist spindle to table ………. 7.9″ – 37.4″
Distance from spindle to column……. 44″
Spindle speed range………. 0 – 6000 rpm
Spindle motor power………….. 30/35 HP
Spindle taper………………….. CAT50
Rapid traverse (X/Y/Z): 472 inch/min
Cutting feed rate…….197 inch/min
ATC Magazine capacity…… 24 Tools
Machine Dimensions:
Floor space (LxWxH)……236x174x140″
Machine net weight…………..44,313 lbs
Equipped with:
Fanuc 18M
Spindle Chiller
Geared Head Spindle
RS-232 Communication
Hand held MPG
Dual Chip Conveyors
Full Enclosure Splash Guards
Coolant Tank with wash down

I have a couple of smaller pieces (a press and air compressor) and 20+ years’ worth of surplus tooling.
 

Attachments

  • IMG_2050.JPG
    IMG_2050.JPG
    413.1 KB · Views: 22
  • IMG_2051.JPG
    IMG_2051.JPG
    472.9 KB · Views: 22
  • IMG_2053.JPG
    IMG_2053.JPG
    157.9 KB · Views: 21
  • IMG_2054.JPG
    IMG_2054.JPG
    130.9 KB · Views: 22

JDL2489

Plastic
Joined
Apr 26, 2005
We have a 2000 Takumi Seiki V22AY machine for sale.
We are selling due to lack of space and we had to take this one offline to make room for a new HMC.

X-Axis Travel ………….. 86.6″
Y-Axis Travel ………….. 42″
Z-Axis Travel …………… 29.5″
Table Size……………………….86.6″ x 40″
Max Table Load……………………..6614 lbs
Dist spindle to table ………. 7.9″ – 37.4″
Distance from spindle to column……. 44″
Spindle speed range………. 0 – 6000 rpm
Spindle motor power………….. 30/35 HP
Spindle taper………………….. CAT50
Rapid traverse (X/Y/Z): 472 inch/min
Cutting feed rate…….197 inch/min
ATC Magazine capacity…… 24 Tools
Machine Dimensions:
Floor space (LxWxH)……236x174x140″
Machine net weight…………..44,313 lbs
Equipped with:
Fanuc 18M
Spindle Chiller
Geared Head Spindle
RS-232 Communication
Hand held MPG
Dual Chip Conveyors
Full Enclosure Splash Guards
Coolant Tank with wash down

I have a couple of smaller pieces (a press and air compressor) and 20+ years’ worth of surplus tooling.

We have a 2000 Takumi Seiki V22AY machine for sale.
We are selling due to lack of space and we had to take this one offline to make room for a new HMC.

X-Axis Travel ………….. 86.6″
Y-Axis Travel ………….. 42″
Z-Axis Travel …………… 29.5″
Table Size……………………….86.6″ x 40″
Max Table Load……………………..6614 lbs
Dist spindle to table ………. 7.9″ – 37.4″
Distance from spindle to column……. 44″
Spindle speed range………. 0 – 6000 rpm
Spindle motor power………….. 30/35 HP
Spindle taper………………….. CAT50
Rapid traverse (X/Y/Z): 472 inch/min
Cutting feed rate…….197 inch/min
ATC Magazine capacity…… 24 Tools
Machine Dimensions:
Floor space (LxWxH)……236x174x140″
Machine net weight…………..44,313 lbs
Equipped with:
Fanuc 18M
Spindle Chiller
Geared Head Spindle
RS-232 Communication
Hand held MPG
Dual Chip Conveyors
Full Enclosure Splash Guards
Coolant Tank with wash down

I have a couple of smaller pieces (a press and air compressor) and 20+ years’ worth of surplus tooling.
 

HiNi

Cast Iron
Joined
Jun 22, 2010
Location
Southeast, USA
I did not see my reply from this morning, so I'm sending another.
Asking $25K
We are a machine shop not a dealer.
Located near I-65 Huntsville/Decatur Alabama.
Thanks.
 








 
Top