What's new
What's new

2018 Haas Mini Mill, light use, Elkins WV

Andy FitzGibbon

Diamond
Joined
Sep 5, 2005
Location
Elkins WV
I am listing this for a buddy. Here is his description:

"I bought this Mini-Mill new from Haas and took delivery of it in early 2019. It was manufactured in 2018. It has had very light usage machining mosty hardwood, brass, nickel silver, silver, delrin and the occasional aluminum. It has never machined steel. It has never had coolant in the machine other than a little mist coolant now and then. I have been the only operator and it has never been crashed although I've broken a few endmills. I see from the diagnostics page that it has had 1360 tool changes, 256 power cycles and "power on" time is 1059:58:42. It is equipped with rigid tapping and a 4th axis. I intend to keep the 3 jaw chuck currently mounted on the 4th axis and the second chuck shown mounted on the table. I have a tailstock set up for the 4th axis which is included. I also have ten cat/40 collet holders which I will sell separately unless you care to make an offer which I am happy to entertain.

I bought the machine for two reasons. First, to upgrade my instrument making to modern methods and second, because I took to heart the advice to think ahead and buy the machine you hope to grow into. Both have proven out for me, although on the second point, this machine is really overkill and I probably will do better with a smaller, probably gantry style machine and this is the reason for selling.

I see from my original quote from Haas that I paid $44,400 for the mill, 4th axis, rigid tapping, and etc. and I would like to get something equivalent to this. The pricing factors both the condition of the mill and immediate availability. Machines ordered from Haas now are looking at summer delivery times according to the Haas sales representative."

If interested, message me for his contact information. Machine is under power currently and can be inspected/run in Elkins, WV. Located in a small home shop that is on an alley... there is an overhead hoist to load smaller vehicles, or the machine can be transported to a different location with a dock or forklift if it needs to go on a larger vehicle.



Sent from my SM-G950U using Tapatalk
 

Andy FitzGibbon

Diamond
Joined
Sep 5, 2005
Location
Elkins WV
Photo test
895abf0a21ed3da19e9319734bf0f5d0.jpg


Sent from my SM-G950U using Tapatalk
 








 
Top