Rick Finsta
Stainless
- Joined
- Sep 27, 2017
Looks like I just sold out of everything I have in inventory so I need to get rocking on some stuff that is best suited to two operations: using a 4th axis for the first, and simply removing the excess holding stock and chamfering on the second in a vise on the table.
Everything I can find is going to put the vise(s) way too close to the spindle face to be useable (like the two-sided or three-side units, or the 5th-Axis brand 90deg adapter).
Other than those who have built 90deg adapters and then mounted a Lang (or whatever) 96mm plate onto it... is there anything commercially available for this? I REALLY don't have time to make something, I need to bolt something in and cut parts.
Everything I can find is going to put the vise(s) way too close to the spindle face to be useable (like the two-sided or three-side units, or the 5th-Axis brand 90deg adapter).
Other than those who have built 90deg adapters and then mounted a Lang (or whatever) 96mm plate onto it... is there anything commercially available for this? I REALLY don't have time to make something, I need to bolt something in and cut parts.