Adding a BTR to Mazak M5 with Fanuc 2000C control

[steelneel]

I have a Mazak M5 with a Fanuc 2000C control. I've been doing some looking at BTRs and I can't find anything for less than $1,200. Is there a less expensive alternative to drip feed the programs to the control. I don't mind buying the BTR if it's the only option, but I just want to know if there are any other options or alternatives for a cheaper price.

 

[Garwood]

I have a nice ADR BTR that came off a Mazak M4 with a Fanuc 5T. If the Fanuc 5T and 2000C use the same tape protocol I'd make you a great deal on it.

 

[bob]

I put one on my Fanuc edm years ago came from a company in Guelph Ontario. Changed hands but they are still in business. If you want I can try to find contact info
Bob

 

[Vancbiker]

I have a nice ADR BTR that came off a Mazak M4 with a Fanuc 5T. If the Fanuc 5T and 2000C use the same tape protocol I'd make you a great deal on it.

A BTR for a 5T will work on a 2000C.

 

[steelneel]

Great! I would be interested in buying. Both the controls use the same 50 pin ribbon cable and tape reading. My email is: christian AT obbco DOT com