Amada RG100 (1986) year with NC9EX controller question. I recently purchased a 1986 Amada RG100 Pressbrake, and I need assistance on how to input back gauge and Depth of bend settings. I've been using it inputting the backgauge settings using the three buttons for fast and slow movement of the back gauge, and its difficult to land on the right numbers as it runs up and down past them using these keys. I looked up the manual for the NC9EX controller, and it isn't clear to me the key sequence to enter back gauge setting or Depth setting from reading it. Maybe someone out there can give me a simple key sequence to do these two basic functions, any help would be appreciated.