What's new
What's new

Anilam servo drive retrofit issues

Alisasani

Plastic
Joined
Nov 17, 2023
Hey guys , I converted my anilam crusader m to use a Galil controller, I tried using amc dc servo drivers and I couldn’t get the servo tuned , no matter what I tried. I’m attempting to go back to the original drives. I’m getting a ground fault error and the armature wires are not connected. Essentially I have the drive powered at 80v . The light comes on only when I connect the 15v plug to the board off the ac/dc power supply . Any ideas
 

Attachments

  • IMG_0210.jpeg
    IMG_0210.jpeg
    349.3 KB · Views: 4
  • IMG_0211.jpeg
    IMG_0211.jpeg
    805.1 KB · Views: 4
  • IMG_0213.jpeg
    3.3 MB · Views: 2








 
Back
Top