What's new
What's new

ATC issue MB46


Apr 27, 2023
Hi looking for some help with my ATC tool changers. Every now and then the machine tries to do a tool change and put the new tool in the spindle but it comes into contact with something. Alarms out makes a dink and then I have to system recover the tool changer and reset sequence to 1.

I have taken the tool arm apart now and tried to adjust the rotation so that the tool changer is sweeping over correctly and it completed 3 out of 4 changes.

How can I adjust the Z and X Tool change position in my parameters?

I believe this might have moved when the machine came in.

Machine is Okuma MB46VAE
Control: OSPU100M year 2001


  • IMG_7511.jpeg
    1.7 MB · Views: 3