Hy guys,
i´m Dominik from Germany, 4 weeks ago i bought a colchester mastiff with a scale on topslide.
It´s an acurite senc 50.
Unfortunately i teared off the cable from the reading head.
The wires broked direct on the circuit board(platine) so i dont know which wire on which position.

I already searched with google, i coould download a manual but this shows only the pinout for the connector.
The german company Heidenhain bought acurite an these days i called heidenhain...
The technical support isnt allowed to give me the pinout for the platine.
So i hope that anybody here in the forum can help me with an picture from the Senc50 pinout on the reader head.
many thanks in advance!!
Dominik![IMG_20220405_195507[1].jpg IMG_20220405_195507[1].jpg](https://www.practicalmachinist.com/forum/data/attachments/288/288278-56a9d7a22c7c8b6cb50aba23640e7a96.jpg)
![IMG_20220405_192531[1].jpg IMG_20220405_192531[1].jpg](https://www.practicalmachinist.com/forum/data/attachments/288/288279-f7d3c65f9d70d073165520575cfb8b95.jpg)
i´m Dominik from Germany, 4 weeks ago i bought a colchester mastiff with a scale on topslide.
It´s an acurite senc 50.
Unfortunately i teared off the cable from the reading head.
The wires broked direct on the circuit board(platine) so i dont know which wire on which position.


I already searched with google, i coould download a manual but this shows only the pinout for the connector.
The german company Heidenhain bought acurite an these days i called heidenhain...
The technical support isnt allowed to give me the pinout for the platine.
So i hope that anybody here in the forum can help me with an picture from the Senc50 pinout on the reader head.
many thanks in advance!!
Dominik
![IMG_20220405_195507[1].jpg IMG_20220405_195507[1].jpg](https://www.practicalmachinist.com/forum/data/attachments/288/288278-56a9d7a22c7c8b6cb50aba23640e7a96.jpg)
![IMG_20220405_192531[1].jpg IMG_20220405_192531[1].jpg](https://www.practicalmachinist.com/forum/data/attachments/288/288279-f7d3c65f9d70d073165520575cfb8b95.jpg)