We have several Speedios and just recently tried engraving around a cylindrical surface on one of them. Problem is it is exceptionally slow on the rotation and is really limiting the speed I can run at. I can't go over 780 DPM and engraving one fairly small letter is taking well over a minute. I tried upping the feed rate parameter for the rotary and I still get an alarm over 780 DPM. It can rapid plenty quick though. I was told this may be a known issue, particularly when the machines are run in inch mode vs. metric. If that's the case, is there a known solution to the known issue anyone can help me out with that doesn't involve putting the machine in metric or slowing down the rapid parameter and running it in rapid (probably wouldn't work moving X and Y at the same time anyway).
To be clear I am doing an X, Y, A move during the engraving.
Thanks.
To be clear I am doing an X, Y, A move during the engraving.
Thanks.
Last edited: