What's new
What's new

Brother TC-S2B No tool in magazine

Circlesquare

Plastic
Joined
Mar 5, 2019
Hi guys I'm working on a Brother TC-S2B. I'm get a error coming up saying that there is no tool in magazine.
But I cant find a sensor capable of sensing a tool. The machine knows what tool pocket its in. I can manually change tools and rotate the magazine. But as soon as I enter M06 T1 it gives the no tool in magazine error.

I'm new to Brother machines so any help would be apricated.
 
Sounds like the ATC Tool or Magazine screen needs to be set up. Go in MDI mode and press the Magazine or ATC Tool display button. This screen is where you tell the machine what tool is in what Pot. Typically Tool 1 is in Pot 1 etc.. If you switch from metric to inch mode it clears it out I think. or someone was creative with their tool numbering.
 
That’s probably what happened the first thing I did was switch it over form metric to inch. Thanks for the help.
 








 
Back
Top