Brown & Sharpe Cylindrical Grinder 4 Jaw Chuck

[Rogue_Machinist]

Was removed from a locked up Brown and Sharpe Grinder heading to the scrap yard. This was tight but jaws were moveable with some effort. Sprayed down with penetrating oil and letting it sit so the jaws free up. Did NOT have a Chuck Handle with it. Asking $300 plus Shipping. Shipping will be USPS Medium Flat Rate fully insured. Paypal Only please.

 

[johnoder]

The locked up work head feature is one of the features of the B&S Universal = you could always undo the locked up feature and not scrap it

The folks interested in the chuck will want to know what number of the B&S is like 1, 2, 3 or 4

Here is a manual page - see second paragraph in right column. Locking pin location will be in various places - like on my 1947 No. 4 it is just on the back of work head

 

[Rogue_Machinist]

All jaws are free and have been cleaning and will be lubricated and worked in a bit. The screws for the jaws are pristine and the jaws themselves are clean and in amazing shape. And the faceplate is marked 1,2,3 and 4. So I will install the jaws correctly.

 

[Rogue_Machinist]

BUMP.......Make me an offer.

 

[Rogue_Machinist]

Bump Make an offer, worst I can say is no.

 

[Rogue_Machinist]

This item is sold!