What's new
What's new

Can't believe I found more airlines, wheel hub, surface grinder wheels

p-moon

Aluminum
Joined
Apr 2, 2005
Location
indiana
I must have stored male and female airlines in the same location.
Selling the Last of the airline drops from the shop (I promise) as a lot, all 1/4 id, all of the QD fittings are industrial style 1/4"
The following lengths all have 1/4 female QD one end, 1/4 barbed 1/4 nptm other end with 1/2 x 1/4 npt bushing: 15', 10', 2-8', 3-7', 6', 3'
10' with 1/4 barbed fitting 1/4 nptm each end
7' with QD female one end, 1/4 nptm other end
11 drops in all, also a blowgun and couple extra QD fittings, how about $30 for all plus shipping the cheapest way I can.

2 coils of good condition 1/4 id air hose, 30-35 foot and 50-60 foot, $12 and $18, or $25 for both plus shipping.

Still have one bare surface grinder hub left, non-balancing, $45

Another with my corner cleanout wheel. Norton 120 grit with the backside dressed at a negative angle so only the bottom had to be dressed to sharpen the corner. Used it to clean out corners and also as a finish for side wheeling. How about $60?

Norton 8x3/4x1 1/4 39A6IIVBE new, Have 5 would like to sell all for $85, but will take $20 each individually

Grinding wheel guard in great condition off my 618 Gardner. Fits on 3.750 dia spindle hose, could be bored or bushed. Very heavy guard. Originally for a 7 inch wheel, but I think it could be opened to 8 inch. Price dropped to $175

Still have 3 of the US Abrasives 8x3/4x1 1/4 46H surface grinding wheels, new never mounted $15 each or all three for $35

Norton 8x1x1 1/4 38A46-I8VBE new never mounted $20

Norton 8x3/4x1 1/4 32A46-K5VBE 2 wheels, new, $20 each, both for $35.

Please ask for additional photos.
 

Attachments

  • DSCN3468.JPG
    DSCN3468.JPG
    411.3 KB · Views: 22
  • DSCN3384.JPG
    DSCN3384.JPG
    368.1 KB · Views: 25
  • DSCN4312 - Copy.JPG
    DSCN4312 - Copy.JPG
    378.2 KB · Views: 22
  • DSCN4308.JPG
    DSCN4308.JPG
    1.6 MB · Views: 22
  • DSCN4255 - Copy.JPG
    DSCN4255 - Copy.JPG
    115 KB · Views: 21
  • DSCN4242.JPG
    DSCN4242.JPG
    2 MB · Views: 21
  • DSCN4193.JPG
    DSCN4193.JPG
    2.4 MB · Views: 21
  • DSCN4195.JPG
    DSCN4195.JPG
    2.7 MB · Views: 20
  • DSCN4199.JPG
    DSCN4199.JPG
    892.7 KB · Views: 23
I'd like the

Still have 3 of the US Abrasives 8x3/4x1 1/4 46H surface grinding wheels, new never mounted $15 each or all three for $35

PM incoming!
 
Will any of the 8x 1 or 3/4 x 1 1/4 white wheels handle 3600 rpm to be used be on on a regular grinder with a 1 1/4 arbor ?
thanks
animal
 








 
Back
Top