What's new
What's new

Charmilles Robofil 510F contact block spacer

nsnipe

Plastic
Joined
Aug 12, 2022
Hello,
Could anyone explain what plastic spacer in contact block do? There wasn't one before so i bought one according to maitenance manual part no., but spacer doesnt even fit next to contact holder, and fastening (adjustment??) holes doesn't align...

 
This is off of one of my 310's, should be about the same. Looks like the one you have is too big. Novotech's #24.04.279 is the one I have. It says also for the 510. The one that looks like yours says it's also for the 310. Hope this is helpful! ---------------- John :cheers:310 contact.JPG
 
Thanks for reply. I'm guessing it depends on the year of the model. The question what its for still remains. According Novotech width should be 9.25mm, mine is 9.3... Is your ceramic or pom?
 
Update: it seams (to me) its function - to prevent contact retraction overtravel (which leads to deeper groove in contact than alowed >6mm height) also act as guide for retraction bracket.
 








 
Back
Top