neno
Plastic
- Joined
- Feb 4, 2008
- Location
- bulgaria gabrovo
Hello, everyone
We have machine CHIRON FZ 16 with FANUC 10 manufactured 1986 year. Because the machine was standing a long time in power off state , the battery was discharged. When now we power on the machine all memory is clear. I have parameters from 0 to 10511 and I input its but it isn't enough to start machine to work. I need more information as : TIMER , COUNTR , KEEPRL , DATA , POS. I need also and subprograms(fixed cycles) and program 9001 for tool change. If anyone has this information please help me. Thanks in advance.
We have machine CHIRON FZ 16 with FANUC 10 manufactured 1986 year. Because the machine was standing a long time in power off state , the battery was discharged. When now we power on the machine all memory is clear. I have parameters from 0 to 10511 and I input its but it isn't enough to start machine to work. I need more information as : TIMER , COUNTR , KEEPRL , DATA , POS. I need also and subprograms(fixed cycles) and program 9001 for tool change. If anyone has this information please help me. Thanks in advance.
