HiltzMachining
Plastic
- Joined
- Dec 4, 2018
- Location
- Aroostook County
COMPLETE TURN KEY FULL MACHINE SHOP EQUIPMENT
Putting this out there to see what I get for interest.
This is for the entire contents of my machine shop business.
Every machine, every tool down to the last socket.
This Machine Shop was featured on the Practical Machinist YouTube Channel and has had more than 60k views.
See the tour here
Includes…
Bridgeport Series 1
Logan 14x40 and 11x36 lathes
Sunnen Honing Machine
Abrasive #2 Surface Grinder
Multiple drill presses
Large surface plate
Carbide grinder
Blast cabinet
3D Printer
Rhodes Shaper
Much more
Many vises and fixturing setup tools, collet chucks etc
Massive amounts of tooling for each machine… impossible to list all
Complete welding setup including 4 machines -
Lincoln MIG, Lincoln AC225, AHP TIG machine, Plasma Cutter…
Large and small air compressors
Dake 50H press, several arbor presses
Vast amount of measuring equipment, boring heads - including Wohlhaupter - gauge blocks, gauge pins, dial bore gauge
Vast vast amounts of hand tools, special shop lighting etc
Fully equipped to bore and hone Powersports cylinders, perform short run production and service the repair work industry
This is a real shop with real Machine Tools, not a hobby shop
$100,000 everything is under power. Can be seen under operation during business hours. Customer will be required to move the contents of the shop after payment.
Many photos can be seen on the FaceBook Marketplace listing https://www.facebook.com/marketplace/item/1112994292990933/
Also see many of the machines in use at the YouTube Channel https://www.youtube.com/mainemachinist or at the Practical Machinist Shop Tour link above.
Putting this out there to see what I get for interest.
This is for the entire contents of my machine shop business.
Every machine, every tool down to the last socket.
This Machine Shop was featured on the Practical Machinist YouTube Channel and has had more than 60k views.
See the tour here
Includes…
Bridgeport Series 1
Logan 14x40 and 11x36 lathes
Sunnen Honing Machine
Abrasive #2 Surface Grinder
Multiple drill presses
Large surface plate
Carbide grinder
Blast cabinet
3D Printer
Rhodes Shaper
Much more
Many vises and fixturing setup tools, collet chucks etc
Massive amounts of tooling for each machine… impossible to list all
Complete welding setup including 4 machines -
Lincoln MIG, Lincoln AC225, AHP TIG machine, Plasma Cutter…
Large and small air compressors
Dake 50H press, several arbor presses
Vast amount of measuring equipment, boring heads - including Wohlhaupter - gauge blocks, gauge pins, dial bore gauge
Vast vast amounts of hand tools, special shop lighting etc
Fully equipped to bore and hone Powersports cylinders, perform short run production and service the repair work industry
This is a real shop with real Machine Tools, not a hobby shop
$100,000 everything is under power. Can be seen under operation during business hours. Customer will be required to move the contents of the shop after payment.
Many photos can be seen on the FaceBook Marketplace listing https://www.facebook.com/marketplace/item/1112994292990933/
Also see many of the machines in use at the YouTube Channel https://www.youtube.com/mainemachinist or at the Practical Machinist Shop Tour link above.
