What's new
What's new

Deckel DVD is now available...

wrench

Titanium
Joined
Jul 9, 2002
Location
Sunnyvale, CA
Hi all,
The time is finally here! I have finished the Deckel DVD and this post is the official introduction. Basically, I have taken the original format and expanded it with additional data. I apologize for the delay in this. I had finished everything and then my computer hard disk crashed. It has been a monumental effort to recover from that. Fortunately I had just made my initial copy of the DVD, so I had the data (basically I was not able to recover anything from the hard disk but had an older backup). The hassle of the crashed computer occupied all of my time and I didn't want to undertake producing the DVD until now.

OK, now for the price. It is really quite simple; this is a "share the burden" project. I almost gave up the whole endeavor about 6 months ago due to some dissent within the group, but I also got a great deal of support and that is what kept me going. But let me explain the pricing so that everyone understands. Producing a DVD takes about 1 hour. I am *not* willing to devote that much time to it, so I purchased a duplicator. These are expensive so I had to go to the used market. The first one cost me $350 and it didn't work; I ate that (money, not the duplicator!). The second one cost me $1000 and it works perfectly--yes, $1000. Each DVD costs me upwards of $6 to pay fees, produce, package and ship. And this does not even include the countless hours I sit in front of a scanner. Yes, some people send me material already scanned, but much of it is done by myself. I don't do make the DVD for profit; I do it because we have a bunch of ancient machines that are not supported by the manufacturers anymore, if those manufacturers even exist. Sadly, the only way to get manuals for 99% of these tools is if someone is kind enough to help you out... That is the cold hard reality of why I undertook this project.

That was all my qualification for the pricing structure. I hope you understand, but I wanted to make everyone away of the effort and expense that goes into this project. The pricing is as follows:

Previous purchasers of the CD: $46
New purchaser of the DVD: $86

To keep things simple, I will do the same thing as I did before, and include shipping to pretty much anywhere in the Western world. Generally this has worked fine, although there have been a few hiccups, most notably to Italy, Portugal and Australia.

The same request I made before I make again about not copying the DVD. This is all a "for your own enjoyment" thing and I do hope that this helps you get your machine running or you learn from the material. If you are not interested in the DVD, then by all means do not get it.

I have included a partial directory. I say partial because there is a actually quite a bit more on the DVD that I am not listing. I ommited this because the data is fundamentally not germane to the German/Swiss machine tools that we use in this forum. However, I had the room and the manuals may be of interest to you, so I have included them. If I start to run out of space, then I will start to delete these files.

I should point out that because I have room, the DVD contents will be more "dynamic" than with the CD. I pretty much ran out of room on the latter before I even made my first cut. Now, however, I will be able to add files as they become available.

Finally, the duplicator I have also prints images on it. I would like to publicly thank Franz Singer for generously providing an image for me to use on the disc. He responded in a matter of hours to my request for a high resolution shot of one of his magnficantly rebuild Deckels.

Regards,
Alan

So.... Here is the partial directory tree.

Directory of D:\Manuals and Design Information\Aciera

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/21/2004 22:38 PM 258,870 Aciera Back Cover.pdf
10/06/2003 09:26 AM 11,873,154 Aciera F1 Operator's Manual.pdf
10/06/2003 08:49 AM 27,309,595 Aciera F1 Service Manual.pdf
01/27/2006 10:06 AM 103,126,091 Aciera F4 Operator's and Parts Manual.pdf
4 File(s) 142,567,710 bytes

Directory of D:\Manuals and Design Information\Alexander

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
04/02/2005 09:34 AM 7,781,128 Alexander Tool & Cutter Grinder (S0 clone).pdf
03/31/2005 11:02 AM 6,289,961 Alexander Toolmaker's Mill (FP1 clone).pdf
11/03/2004 21:09 PM 6,123,591 Master Toolmaker Mill.pdf
11/03/2004 21:10 PM 42,599 TOOL MAKER (HIGH SPEED PULLEY ).pdf
4 File(s) 20,237,279 bytes

Directory of D:\Manuals and Design Information\Deckel

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
08/22/2005 21:54 PM <DIR> Centricator
07/24/2006 22:33 PM <DIR> CNC
01/08/2006 17:00 PM <DIR> Electrical Cabinet Schematics
05/15/2006 22:16 PM <DIR> FP1 Manuals
05/15/2006 22:17 PM <DIR> FP2 Manuals
01/05/2006 21:40 PM <DIR> FP3 Manuals
12/12/2004 23:02 PM <DIR> FP4 Manuals
08/29/2005 23:11 PM <DIR> FP5NC Manuals
02/06/2005 22:44 PM <DIR> Grinding Head
06/03/2006 08:48 AM <DIR> New Folder
11/03/2004 21:24 PM <DIR> Pantograph
11/03/2004 21:24 PM <DIR> S0 Grinder
05/28/2006 09:55 AM <DIR> S1 Grinder
01/27/2006 21:43 PM <DIR> Technical Bulletins
03/24/2005 22:57 PM <DIR> Various Information
0 File(s) 0 bytes

Directory of D:\Manuals and Design Information\Deckel\Centricator

08/22/2005 21:54 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
07/16/2005 22:47 PM 12,449,034 Centricator Manual (English).pdf
11/11/2004 15:38 PM 8,185,288 Centricator Manual (German).pdf
08/22/2005 21:54 PM 588,719 Franz Haimer 3D sensor.pdf
3 File(s) 21,223,041 bytes

Directory of D:\Manuals and Design Information\Deckel\CNC

07/24/2006 22:33 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
07/24/2006 22:35 PM <DIR> NC Enclosure
07/24/2006 22:26 PM <DIR> Siemens 3M based system
05/15/2006 22:25 PM <DIR> Welcome to the Manufacturing Forum Contour 3 - Dialog 4 round up Error_files
05/15/2006 22:25 PM <DIR> Welcome to the Manufacturing Forum Dialog LED's_files
04/11/2006 17:06 PM 17,246,304 Bosch Manual.pdf
04/13/2006 13:10 PM 21,519,410 Bosch Transistorverstarker TR 15 II.pdf
05/23/2006 10:15 AM 302,779 Circular interpolation.pdf
05/23/2006 10:29 AM 207,736 CNC Pendant Button Layout.pdf
05/23/2006 10:31 AM 144,008 CNC reinitialization steps.pdf
05/23/2006 09:55 AM 339,602 CNC RS-232 notes.pdf
05/23/2006 10:30 AM 3,739,622 CNC Tach Generator Schematic.pdf
09/23/2005 08:54 AM 98,235,788 Deckel Dialog 4.pdf
04/21/2006 09:10 AM 49,008 Deckel FP1 CNC conversion.jpg
04/14/2006 09:15 AM 112,920,617 Deckel NC Milling Made Easy (Tutorial).pdf
04/21/2006 09:00 AM 4,497,293 deckel_fp1_demo (german).wmv
11/03/2004 21:06 PM 26,372,941 Dialog CNC Service Information.pdf
04/21/2006 09:12 AM 1,258,036 FP1 CNC Conversion.pdf
05/15/2006 22:22 PM 2,560,917 FP4NC Dialog 2 Brochure.pdf
05/23/2006 10:16 AM 314,908 Keyboard Layout.pdf
05/23/2006 10:29 AM 1,931,733 NC Tutorial Sheets.pdf
01/31/2006 14:11 PM 59,809 Welcome to the Manufacturing Forum Contour 3 - Dialog 4 round up Error.htm
01/31/2006 14:11 PM 123,002 Welcome to the Manufacturing Forum Dialog LED's.htm
18 File(s) 291,823,513 bytes

Directory of D:\Manuals and Design Information\Deckel\CNC\NC Enclosure

07/24/2006 22:35 PM <DIR> .
07/24/2006 22:33 PM <DIR> ..
07/24/2006 22:35 PM 1,447,880 PICT0225.JPG
07/24/2006 22:35 PM 1,461,312 PICT0227.JPG
07/24/2006 22:35 PM 1,477,908 PICT0228.JPG
07/24/2006 22:35 PM 1,362,125 PICT0229.JPG
07/24/2006 22:35 PM 1,529,005 PICT0230.JPG
07/24/2006 22:35 PM 1,310,412 PICT0231.JPG
07/24/2006 22:35 PM 1,291,507 PICT0232.JPG
07/24/2006 22:35 PM 1,364,224 PICT0233.JPG
07/24/2006 22:33 PM 1,632,991 PICT0234.JPG
07/24/2006 22:33 PM 1,655,007 PICT0235.JPG
07/24/2006 22:33 PM 1,390,275 PICT0236.JPG
07/24/2006 22:33 PM 1,487,615 PICT0237.JPG
07/24/2006 22:33 PM 1,402,774 PICT0241.JPG
07/24/2006 22:33 PM 1,638,615 PICT0242.JPG
07/24/2006 22:33 PM 1,534,624 PICT0243.JPG
07/24/2006 22:33 PM 1,510,210 PICT0244.JPG
16 File(s) 23,496,484 bytes

Directory of D:\Manuals and Design Information\Deckel\CNC\Siemens 3M based system

07/24/2006 22:26 PM <DIR> .
07/24/2006 22:33 PM <DIR> ..
07/19/2006 21:55 PM <DIR> Siemens System 3 Manuals
07/10/2006 08:42 AM 22,980,442 Deckel FP3NC and FP4NC Parts Catalog.pdf
07/11/2006 09:55 AM 29,664,751 Deckel NC with Siemens 3M Control Electrical Wiring.pdf
07/10/2006 09:10 AM 827,313 Operation Notes.pdf
07/10/2006 09:10 AM 827,313 Siemens 3M Operation Notes.pdf
07/11/2006 10:07 AM 43,539,754 Siemens 3M Operators Manual.pdf
5 File(s) 97,839,573 bytes

Directory of D:\Manuals and Design Information\Deckel\CNC\Siemens 3M based system\Siemens System 3 Manuals

07/19/2006 21:55 PM <DIR> .
07/24/2006 22:26 PM <DIR> ..
07/10/2006 15:13 PM 349,387 072_810M 3M Lettering Cycles Programming Guide.pdf
07/11/2006 11:03 AM 1,105,189 183_Planning Guide Inductosyn.pdf
07/11/2006 11:03 AM 1,530,926 184_8 Planning Guide Measuring Cycles Part 0 Sys 3 8.pdf
07/11/2006 11:04 AM 3,062,395 185_8 Planning Guide Measuring Cycles Part 1 Sys 3 8.pdf
07/10/2006 14:54 PM 4,532,054 186_8 Planning Guide Measuring Cycles Part 2 Sys 3 8.pdf
07/11/2006 11:01 AM 1,618,382 196_8 User's Guide Trans-PCIN-PGIN Sys 3 8 800 Primo.pdf
07/11/2006 10:46 AM 2,378,729 40_3 FBs for 130WB Package 0.pdf
07/11/2006 10:46 AM 3,416,441 41_3 FBs for 130WB Package 1.pdf
07/11/2006 10:46 AM 2,155,671 42_3 FBs for 130WB Package 2.pdf
07/11/2006 10:47 AM 2,533,398 43_3 FBs for 130WB Package 3.pdf
07/11/2006 10:47 AM 578,294 44_3 FBs for 130WB Package 4.pdf
07/11/2006 10:47 AM 1,408,007 45_3 FBs for 130WB Package 5.pdf
07/11/2006 10:48 AM 1,359,784 46_3 FBs for 130WB Package 6.pdf
07/11/2006 10:48 AM 3,563,080 47_3 FBs for 130WB Package 7 Computer Link.pdf
07/11/2006 10:48 AM 921,734 48_3 FBs for 130WB Package 7 Message Frames.pdf
07/10/2006 14:56 PM 24,359,546 49_3 Installation Guide GA 0-3.pdf
07/10/2006 15:59 PM 28,685,636 50_3 Installation Guide GA 4.pdf
07/11/2006 10:52 AM 5,304,524 51_3 Installation Guide 3G Diff.pdf
07/11/2006 10:52 AM 3,189,230 52_3 Installation Guide ELG Diff.pdf
07/11/2006 10:53 AM 6,214,960 53_3 Interface Description GA 0-3.pdf
07/11/2006 10:54 AM 9,064,356 54_3 Interface Description GA 4B.pdf
07/11/2006 10:54 AM 2,689,278 55_3 Interface Description GA 4C Diff.pdf
07/11/2006 10:53 AM 4,811,841 56_3 Interface Description 3G Diff.pdf
07/11/2006 10:53 AM 2,566,957 57_3 Interface Description ELG Diff.pdf
07/11/2006 10:54 AM 976,119 58_3 Interface Description Triple PLC Diff.pdf
07/10/2006 14:58 PM 4,065,177 59_3 Operating Instructions GA 0-2.pdf
07/10/2006 14:59 PM 2,947,789 60_3 Operating Instructions GA 3.pdf
07/10/2006 14:59 PM 5,276,376 61_3 Operating Instructions GA 4.pdf
07/11/2006 10:44 AM 3,351,531 62_3 Operating Instructions 3G.pdf
07/11/2006 10:44 AM 2,114,212 63_3 Operating Instructions 3N Diff.pdf
07/11/2006 10:45 AM 2,970,568 64_3 Operating Instructions ELG.pdf
07/11/2006 10:59 AM 1,530,027 65_3 Planning Guide Measuring Cycles Part 0 Sys3 8.pdf
07/11/2006 11:00 AM 3,061,016 66_3 Planning Guide Measuring Cycles Part 1 Sys 3 8.pdf
07/11/2006 11:00 AM 4,528,325 67_3 Planning Guide Measuring Cycles Part 2 Sys 3 8.pdf
07/11/2006 10:54 AM 4,741,680 68_3 Programming Guide 3G.pdf
07/10/2006 15:01 PM 5,810,750 69_3 Programming Guide 3M.pdf
07/11/2006 10:55 AM 2,173,253 70_3 Programming Guide 3N Diff.pdf
07/11/2006 10:55 AM 5,673,597 71_3 Programming Guide 3T 3TT.pdf
07/11/2006 11:00 AM 1,215,088 74_3 Serial Interface for Data In-Output Sys 3 8.pdf
07/11/2006 11:00 AM 836,786 75_3 Techn Descr Punched Tape Readers Sys 3 5 6 7 8.pdf
07/11/2006 10:45 AM 1,617,460 76_3 User's Guide Trans-PCIN-PGIN Sys 3 8 800 Primo.pdf
41 File(s) 170,289,553 bytes

Directory of D:\Manuals and Design Information\Deckel\CNC\Welcome to the Manufacturing Forum Contour 3 - Dialog 4 round up Error_files

05/15/2006 22:25 PM <DIR> .
07/24/2006 22:33 PM <DIR> ..
01/17/2006 09:45 AM 249 close_topic.gif
01/31/2006 14:10 PM 110 confused.gif
01/27/2006 13:48 PM 3,213 datelib.js
01/17/2006 09:45 AM 268 delete_topic.gif
01/17/2006 09:45 AM 246 edit_ubb6.gif
01/17/2006 09:45 AM 119 email.gif
01/17/2006 09:45 AM 214 feature_topic.gif
01/27/2006 13:48 PM 14,141 lathelogo.jpg
01/17/2006 09:45 AM 237 move_topic.gif
01/30/2006 09:50 AM 3,917 mw_logo200x40.gif
01/17/2006 09:45 AM 120 next_topic.gif
01/17/2006 09:45 AM 79 posticon.gif
01/17/2006 09:45 AM 147 prev_topic.gif
01/17/2006 09:45 AM 901 print_topic.gif
01/17/2006 09:45 AM 217 priv_message.gif
01/17/2006 09:45 AM 110 profile.gif
01/17/2006 09:45 AM 1,401 reply6.jpg
01/17/2006 09:45 AM 1,495 topic6.jpg
01/17/2006 09:45 AM 94 ubb_friend_mini.gif
01/17/2006 09:45 AM 135 user_ratings_5.gif
20 File(s) 27,413 bytes

Directory of D:\Manuals and Design Information\Deckel\CNC\Welcome to the Manufacturing Forum Dialog LED's_files

05/15/2006 22:25 PM <DIR> .
07/24/2006 22:33 PM <DIR> ..
01/17/2006 09:45 AM 249 close_topic.gif
01/27/2006 13:48 PM 3,213 datelib.js
01/17/2006 09:45 AM 268 delete_topic.gif
01/17/2006 09:45 AM 246 edit_ubb6.gif
01/17/2006 09:45 AM 119 email.gif
01/17/2006 09:45 AM 214 feature_topic.gif
01/27/2006 13:48 PM 14,141 lathelogo.jpg
01/17/2006 09:45 AM 237 move_topic.gif
01/30/2006 09:50 AM 3,917 mw_logo200x40.gif
01/17/2006 09:45 AM 120 next_topic.gif
01/17/2006 09:45 AM 79 posticon.gif
01/17/2006 09:45 AM 147 prev_topic.gif
01/17/2006 09:45 AM 901 print_topic.gif
01/17/2006 09:45 AM 217 priv_message.gif
01/17/2006 09:45 AM 110 profile.gif
01/17/2006 09:45 AM 1,401 reply6.jpg
01/17/2006 09:45 AM 1,495 topic6.jpg
01/17/2006 09:45 AM 94 ubb_friend_mini.gif
01/17/2006 09:45 AM 135 user_ratings_5.gif
19 File(s) 27,303 bytes

Directory of D:\Manuals and Design Information\Deckel\Electrical Cabinet Schematics

01/08/2006 17:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 21:10 PM 373,911 1980 Electrical Cabinet.pdf
11/03/2004 21:10 PM 470,202 1980 FP2 Electrical Cabinet.pdf
04/06/2004 14:51 PM 8,656,276 Deckel FP1 (last version) Electrical Schematics.pdf
11/03/2004 21:16 PM 8,663,247 Deckel FP1 Electrical Schematics (1978).pdf
11/03/2004 21:16 PM 457,279 Electrical Cabinet Parts Listing.pdf
11/03/2004 21:16 PM 1,154,228 FP2 and FP3 Electrical Cabinet.pdf
11/03/2004 21:17 PM 51,585 Thyristor in 1980 vintage cabinet.pdf
7 File(s) 19,826,728 bytes

Directory of D:\Manuals and Design Information\Deckel\FP1 Manuals

05/15/2006 22:16 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 21:17 PM 21,345,552 Deckel FP1 (2 wheel) Operator's Manual.pdf
11/03/2004 21:17 PM 20,332,434 Deckel FP1 (2 wheel) Parts Manual.pdf
11/03/2004 21:19 PM 23,629,559 Deckel FP1 (Lever) Operator's Manual.pdf
11/03/2004 21:19 PM 13,079,304 Deckel FP1 (Lever) Parts Manual.pdf
11/03/2004 21:19 PM 24,387,905 Deckel FP1 (new style) Operator's Manual.pdf
04/29/2005 16:52 PM 9,815,987 Deckel FP1 (new style) Parts Manual.pdf
12/09/2005 23:04 PM 19,488,141 Deckel FP1 Manual (1938 Change Gear).pdf
04/02/2005 09:33 AM 34,667,211 Deckel FP1 Operator's Manual (Lever Edition).pdf
04/21/2006 09:03 AM 4,041,149 Deckel FP1, 1941 (German).pdf
04/21/2006 09:08 AM 2,246,783 Deckel FP1, 1950s (German).pdf
04/21/2006 09:06 AM 8,623,754 Deckel FP1, 1960s (German).pdf
04/21/2006 09:00 AM 2,075,145 Deckel FP1, 1972 (German).pdf
04/21/2006 09:09 AM 5,191,274 Deckel FP1, 1973 (German).pdf
13 File(s) 188,924,198 bytes

Directory of D:\Manuals and Design Information\Deckel\FP2 Manuals

05/15/2006 22:17 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 21:20 PM 23,135,354 Deckel FP2 (2 wheel) Manual.pdf
11/03/2004 21:20 PM 5,287,037 Deckel FP2 (old) Parts Manual.pdf
11/03/2004 21:21 PM 41,530,311 Deckel FP2 Manual (1974).pdf
11/03/2004 21:21 PM 26,616,983 Deckel FP2 Operator's Manual (last version).pdf
11/03/2004 21:21 PM 16,485,913 Deckel FP2 Parts Manual (1974).pdf
04/11/2006 16:29 PM 433,971 Deckel FP2 Serial Number List.pdf
08/12/2004 00:04 AM 1,875 Deckel FP2 Serial Number List.txt
12/21/2005 15:04 PM 39,584,926 FP2 Parts Manual (in German).pdf
8 File(s) 153,076,370 bytes

Directory of D:\Manuals and Design Information\Deckel\FP3 Manuals

01/05/2006 21:40 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/22/2005 10:58 AM 15,559,243 FP3 manual (en Francais).pdf
1 File(s) 15,559,243 bytes

Directory of D:\Manuals and Design Information\Deckel\FP4 Manuals

12/12/2004 23:02 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 21:20 PM 16,609,920 Deckel FP4M Parts Manual.pdf
1 File(s) 16,609,920 bytes

Directory of D:\Manuals and Design Information\Deckel\FP5NC Manuals

08/29/2005 23:11 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
08/23/2005 11:00 AM 16,345,697 Deckel FP5NC.pdf
1 File(s) 16,345,697 bytes

Directory of D:\Manuals and Design Information\Deckel\Grinding Head

02/06/2005 22:44 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 21:22 PM 928,182 Adaptive Control Unit.pdf
01/17/2005 12:13 PM 1,637,791 Deckel Grinding Head Adaptive Sensor.pdf
11/03/2004 21:22 PM 2,081,237 Grinding Attachment (German).pdf
11/03/2004 21:22 PM 430,314 Grinding Head (German).pdf
11/03/2004 21:23 PM 57,136,434 Operator's Manual.pdf
11/03/2004 21:23 PM 654,363 Spindle Speeds (German).pdf
11/03/2004 21:23 PM 625,875 Turbine Chart.pdf
7 File(s) 63,494,196 bytes

Directory of D:\Manuals and Design Information\Deckel\New Folder

06/03/2006 08:48 AM <DIR> .
08/05/2006 12:00 PM <DIR> ..
06/03/2006 08:46 AM <DIR> Hardinge
06/03/2006 08:46 AM <DIR> Hurco
0 File(s) 0 bytes

Directory of D:\Manuals and Design Information\Deckel\New Folder\Hardinge

06/03/2006 08:46 AM <DIR> .
06/03/2006 08:48 AM <DIR> ..
0 File(s) 0 bytes

Directory of D:\Manuals and Design Information\Deckel\New Folder\Hurco

06/03/2006 08:46 AM <DIR> .
06/03/2006 08:48 AM <DIR> ..
0 File(s) 0 bytes

Directory of D:\Manuals and Design Information\Deckel\Pantograph

11/03/2004 21:24 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 21:23 PM 7,441,359 Deckel GK12 and GK21 Parts Manual (1980).pdf
11/03/2004 21:24 PM 9,342,506 GK12 and GK21 Operating Instructions.pdf
11/03/2004 21:24 PM 2,069,648 GK12 Parts Manual (1953).pdf
11/03/2004 21:24 PM 2,069,648 GK12 Parts Manual.pdf
4 File(s) 20,923,161 bytes

Directory of D:\Manuals and Design Information\Deckel\S0 Grinder

11/03/2004 21:24 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 21:24 PM 7,541,194 New Style S0 Grinder.pdf
11/03/2004 21:24 PM 9,188,379 Old Style S0 Grinder.pdf
2 File(s) 16,729,573 bytes

Directory of D:\Manuals and Design Information\Deckel\S1 Grinder

05/28/2006 09:55 AM <DIR> .
08/05/2006 12:00 PM <DIR> ..
01/31/2006 14:08 PM 11,673,953 deckel s1 broch2.pdf
01/31/2006 14:08 PM 7,674,007 deckel s1 manual v1.pdf
01/31/2006 14:08 PM 1,804,359 deckel s1 tool cabinet.pdf
01/31/2006 14:05 PM 195,986 S1_sls_2606_10-53_pp4_bottom.gif
01/31/2006 14:04 PM 186,531 S1_sls_2606_10-53_pp4_top.gif
01/31/2006 14:06 PM 170,236 S1_sls_2606_10-53_pp5_bottom.gif
01/31/2006 14:06 PM 213,745 S1_sls_2606_10-53_pp5_top.gif
01/31/2006 14:06 PM 259,420 S1_sls_2606_10-53_pp6_bottom.gif
01/31/2006 14:06 PM 227,106 S1_sls_2606_10-53_pp6_top.gif
01/31/2006 14:07 PM 208,662 S1_sls_2606_10-53_pp7_bottom.gif
01/31/2006 14:06 PM 193,020 S1_sls_2606_10-53_pp7_top.gif
01/31/2006 13:57 PM 12,397 th_S1_sls_2606_10-53_pp5_bottom.gif
01/31/2006 13:57 PM 11,234 th_S1_sls_2606_10-53_pp5_top.gif
01/31/2006 13:57 PM 8,558 th_S1_sls_2606_10-53_pp6_top.gif
14 File(s) 22,839,214 bytes

Directory of D:\Manuals and Design Information\Deckel\Technical Bulletins

01/27/2006 21:43 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 21:25 PM 66,056,991 TechDocs.pdf
11/03/2004 21:25 PM 52,527,562 Technical Bulletins - 1955 to 1959.pdf
11/03/2004 21:26 PM 48,584,016 Technical Bulletins - 1960 to 1963.pdf
11/03/2004 21:26 PM 26,471,417 Technical Bulletins - 1964 to 1966.pdf
11/03/2004 21:26 PM 63,777,778 Technical Bulletins - 1967 to 1971.pdf
11/03/2004 21:27 PM 39,375,702 Technical Bulletins - 1971 to 1974.pdf
6 File(s) 296,793,466 bytes

Directory of D:\Manuals and Design Information\Deckel\Various Information

03/24/2005 22:57 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
05/15/2006 22:18 PM <DIR> Addendums
11/03/2004 21:30 PM <DIR> Deckel Definitions
11/03/2004 21:32 PM <DIR> Fitting & Setup
11/03/2004 21:32 PM <DIR> Lubricants
11/03/2004 21:33 PM <DIR> Motor
03/24/2005 22:57 PM <DIR> Way Covers
0 File(s) 0 bytes

Directory of D:\Manuals and Design Information\Deckel\Various Information\Addendums

05/15/2006 22:18 PM <DIR> .
03/24/2005 22:57 PM <DIR> ..
11/03/2004 21:27 PM 403,663 Centering Microscope.pdf
11/03/2004 21:28 PM 714,602 Corner Milling Att. Addendum.pdf
11/03/2004 21:28 PM 1,340,586 DRO Addendum.pdf
11/03/2004 21:28 PM 435,294 FP2 Optic Head Addendum.pdf
11/03/2004 21:28 PM 481,810 Grinding Head Addendum.pdf
11/03/2004 21:28 PM 959,033 Punch Milling Addendum.pdf
11/03/2004 21:29 PM 151,262 Rotary Table Addendum.pdf
04/11/2006 16:42 PM 3,000,826 Teiltabelle fur Rundtisch.pdf
04/11/2006 16:43 PM 1,464,202 Tieltabelle fur Teilkopf und Spiralfraseinrichtung.pdf
11/03/2004 21:30 PM 833,182 Universal & Rotary Table Addendum.pdf
10 File(s) 9,784,460 bytes

Directory of D:\Manuals and Design Information\Deckel\Various Information\Deckel Definitions

11/03/2004 21:30 PM <DIR> .
03/24/2005 22:57 PM <DIR> ..
11/03/2004 21:30 PM 2,602,046 Deckel Collet Threads.pdf
11/03/2004 21:30 PM 667,922 Deckel Symbol Definitions.pdf
11/03/2004 21:30 PM 15,390,705 Terms and Translations.pdf
3 File(s) 18,660,673 bytes

Directory of D:\Manuals and Design Information\Deckel\Various Information\Fitting & Setup

11/03/2004 21:32 PM <DIR> .
03/24/2005 22:57 PM <DIR> ..
11/03/2004 21:31 PM 1,210,551 Deckel Installation.pdf
11/03/2004 21:31 PM 1,463,594 Fitting an Angular Table.pdf
11/03/2004 21:32 PM 554,029 FP2 Setup Information.pdf
3 File(s) 3,228,174 bytes

Directory of D:\Manuals and Design Information\Deckel\Various Information\Lubricants

11/03/2004 21:32 PM <DIR> .
03/24/2005 22:57 PM <DIR> ..
11/03/2004 21:32 PM 1,112,674 Lubricant Specs. (German).pdf
11/03/2004 21:32 PM 102,062 Mobil Oil Mixing Chart.pdf
11/03/2004 21:32 PM 820,993 Table of Lubricants (English).pdf
3 File(s) 2,035,729 bytes

Directory of D:\Manuals and Design Information\Deckel\Various Information\Motor

11/03/2004 21:33 PM <DIR> .
03/24/2005 22:57 PM <DIR> ..
11/03/2004 21:33 PM 75,367 FP1 Motor Connections.pdf
11/03/2004 21:33 PM 318,795 Siemens Motor Connections.pdf
11/03/2004 21:33 PM 1,921,521 Siemens Motor.pdf
3 File(s) 2,315,683 bytes

Directory of D:\Manuals and Design Information\Deckel\Various Information\Way Covers

03/24/2005 22:57 PM <DIR> .
03/24/2005 22:57 PM <DIR> ..
03/24/2005 22:57 PM <DIR> FP1
0 File(s) 0 bytes

Directory of D:\Manuals and Design Information\Deckel\Various Information\Way Covers\FP1

03/24/2005 22:57 PM <DIR> .
03/24/2005 22:57 PM <DIR> ..
03/24/2005 22:57 PM 38,797 025273_Zaxis (1).pdf
03/24/2005 22:57 PM 38,860 025278_Yaxis (1).pdf
03/24/2005 22:57 PM 1,249,632 025290_Xaxis.pdf
3 File(s) 1,327,289 bytes

Directory of D:\Manuals and Design Information\Lorch

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
07/29/2004 09:58 AM 1,398,497 LAS Sales Brochure.pdf
07/29/2004 09:46 AM 892,313 LAS Test Chart.pdf
07/29/2004 09:51 AM 554,402 Levin Collet Set.pdf
07/29/2004 10:49 AM 68,688 Logo.pdf
07/23/2004 08:33 AM 1,466,985 Lorch Change Gear Plate 2.tif
07/23/2004 08:49 AM 1,472,859 Lorch Change Gear Plate.pdf
07/23/2004 08:33 AM 1,426,602 Lorch Change Gear Plate.tif
01/04/2006 15:12 PM 884,220 Lorch LAS and LLK Sales Brochure.pdf
07/29/2004 10:36 AM 4,205,402 Lorch LAS Manual.pdf
08/25/2005 17:04 PM 454,452 Minarik Speed Controller (Lorch).pdf
07/29/2004 10:47 AM 653,853 Minarik Speed Controller.pdf
07/29/2004 09:52 AM 3,729,407 Pamphlet Binder.pdf
12 File(s) 17,207,680 bytes

Directory of D:\Manuals and Design Information\Monarch

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
04/25/2005 21:37 PM 4,658,033 10EE_Threads.pdf
06/26/2003 08:33 AM 12,917,333 1958 10EE Operator's Manual.pdf
06/25/2003 16:34 PM 7,986,647 1958 Vintage 10EE Parts Manual.pdf
06/26/2003 15:31 PM 13,819,949 1982 10EE Operator's Manual.pdf
06/26/2003 15:31 PM 4,556,984 1982 Vintage 10EE Parts Manual.pdf
06/27/2003 09:10 AM 1,256,140 Bijur Lubricator Service.pdf
06/25/2003 16:31 PM 430,595 Safety Notice.pdf
10/04/2002 22:34 PM 135,752 Thyratron_To_SCR_GE_SCR_Manual.pdf
8 File(s) 45,761,433 bytes

Directory of D:\Manuals and Design Information\Phase Converters

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
03/16/2004 23:23 PM <DIR> Fitch Williams Tuning Instructions
11/11/2004 21:04 PM 276,247 Phase Converter Schematic.pdf
06/27/2003 13:14 PM 108,600 phaseconverter.pdf
2 File(s) 384,847 bytes

Directory of D:\Manuals and Design Information\Phase Converters\Fitch Williams Tuning Instructions

03/16/2004 23:23 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
05/20/1998 13:52 PM 72,150 3phase_cntl.jpg
05/19/1998 22:15 PM 49,924 3phase1.jpg
05/19/1998 22:14 PM 52,364 3phase2.jpg
05/19/1998 22:09 PM 47,340 3phase3.jpg
05/19/1998 22:09 PM 32,907 3phase4.jpg
03/16/2004 22:47 PM 134,399 Bal5sch.jpg
03/16/2004 22:47 PM 104,553 Bal5ya.gif
03/16/2004 23:08 PM 742,912 Con10.doc
03/16/2004 22:47 PM 123,339 Con10.gif
03/16/2004 22:47 PM 164,622 Con10.jpg
03/16/2004 22:47 PM 8,511 Con10txt.txt
03/16/2004 23:17 PM 275,967 schematic.pdf
12 File(s) 1,808,988 bytes

Directory of D:\Manuals and Design Information\Schaublin

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
01/09/2006 19:12 PM <DIR> Schaublin 102
01/09/2006 19:12 PM <DIR> Schaublin 120VM
08/03/2005 19:06 PM <DIR> Schaublin 13
11/14/2004 22:29 PM <DIR> Schaublin 135
11/14/2004 22:29 PM <DIR> Schaublin 70
10/07/2003 11:50 AM 7,851,827 Schaublin Collet Specifications.pdf
11/21/2004 22:27 PM 141,128 Schaublin collets cover.pdf
10/07/2003 13:32 PM 416,732 Schaublin W-xx collets.pdf
3 File(s) 8,409,687 bytes

Directory of D:\Manuals and Design Information\Schaublin\Schaublin 102

01/09/2006 19:12 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
05/21/2005 11:02 AM 822,196 Schaublin 102 (German).pdf
01/09/2006 15:31 PM 3,564,566 Schaublin 102 Manual (German).pdf
01/09/2006 15:31 PM 3,639,767 Schaublin 102N (German).pdf
01/09/2006 15:32 PM 3,493,977 Schaublin 102VM full manual (German).pdf
4 File(s) 11,520,506 bytes

Directory of D:\Manuals and Design Information\Schaublin\Schaublin 120VM

01/09/2006 19:12 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
01/09/2006 15:34 PM 14,051,432 Schaublin 120VM full manual (German).pdf
1 File(s) 14,051,432 bytes

Directory of D:\Manuals and Design Information\Schaublin\Schaublin 13

08/03/2005 19:06 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
08/03/2005 19:06 PM <DIR> Temp
09/08/2003 09:26 AM 30,737,836 Schaublin 13 Manual.pdf
06/27/2003 08:51 AM 2,634,286 Schematic.pdf
06/27/2003 08:50 AM 29,563,292 Service Manual (French).pdf
06/27/2003 08:50 AM 6,560,186 Tableau de division.pdf
4 File(s) 69,495,600 bytes

Directory of D:\Manuals and Design Information\Schaublin\Schaublin 13\Temp

08/03/2005 19:06 PM <DIR> .
08/03/2005 19:06 PM <DIR> ..
09/08/2003 08:32 AM 18,807,781 Schaublin 13 Manual - A sized.pdf
06/26/2003 08:17 AM 11,918,050 Schaublin 13 Parts Manual - B sized.pdf
2 File(s) 30,725,831 bytes

Directory of D:\Manuals and Design Information\Schaublin\Schaublin 135

11/14/2004 22:29 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/12/2004 10:53 AM 20,341,258 Schaublin 135 Service Instructions.pdf
1 File(s) 20,341,258 bytes

Directory of D:\Manuals and Design Information\Schaublin\Schaublin 70

11/14/2004 22:29 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/12/2004 10:35 AM 8,149,112 Schaublin 70 Service Instructions.pdf
1 File(s) 8,149,112 bytes

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
01/30/2003 10:20 AM 2,970,977 Wohlhaupter Oper. Manual.pdf
01/30/2003 10:23 AM 1,262,988 Wohlhaupter UPA3 Parts Listing.pdf
01/30/2003 10:20 AM 2,970,977 wohlhaupter.pdf
3 File(s) 7,204,942 bytes

Directory of D:\Photos\Alexander

11/04/2004 23:34 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
03/03/2004 22:07 PM 1,769,297 deckel_motor.pdf
1 File(s) 1,769,297 bytes

Directory of D:\Photos\Deckel

11/03/2004 19:53 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 19:53 PM 154,471 Antique Deckel.pdf
1 File(s) 154,471 bytes

Directory of D:\Quotations and Correspondence\Aciera

05/21/2005 23:09 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
12/02/2003 15:56 PM 32,106 aciera10.JPG
12/02/2003 15:58 PM 29,078 aciera11.JPG
12/02/2003 15:59 PM 25,102 aciera12.JPG
12/02/2003 16:01 PM 32,315 aciera13.JPG
12/02/2003 16:05 PM 28,309 aciera14.JPG
12/02/2003 16:02 PM 36,711 acierazubeh.JPG
6 File(s) 183,621 bytes

Directory of D:\Quotations and Correspondence\Alexander

02/22/2004 23:14 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
02/22/2004 23:14 PM 6,835,872 Alexander Photos.pdf
1 File(s) 6,835,872 bytes

Directory of D:\Quotations and Correspondence\Deckel

04/10/2006 21:44 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
10/31/2005 21:30 PM <DIR> Auctions
10/13/2004 21:20 PM <DIR> Deckel Newsgroup
04/10/2006 21:44 PM <DIR> Modifications
10/01/2003 21:27 PM <DIR> My FP2
10/01/2003 21:27 PM <DIR> My old FP1 machines
08/21/2004 14:38 PM <DIR> OLD pictures of a Deckel
0 File(s) 0 bytes

Directory of D:\Quotations and Correspondence\Deckel\Auctions

10/31/2005 21:30 PM <DIR> .
04/10/2006 21:44 PM <DIR> ..
10/26/2005 19:47 PM <DIR> FP2NC with Dialog 2_files
10/26/2005 19:46 PM <DIR> FP4NC with Dialog 4_files
10/26/2005 19:47 PM 63,817 FP2NC with Dialog 2.htm
10/26/2005 19:46 PM 64,657 FP4NC with Dialog 4.htm
2 File(s) 128,474 bytes

Directory of D:\Quotations and Correspondence\Deckel\Auctions\FP2NC with Dialog 2_files

10/26/2005 19:47 PM <DIR> .
10/31/2005 21:30 PM <DIR> ..
10/26/2005 19:41 PM 994 70x20_unterwegs_0105.gif
08/17/2005 12:36 PM 226 aboutme-small.gif
08/07/2005 19:52 PM 48 bullet_blk.gif
09/05/2005 19:46 PM 152 buyOn.gif
10/26/2005 19:41 PM 1,983 cip.gif
09/05/2005 19:46 PM 221 comm.gif
10/26/2005 19:40 PM 67,000 ebaybase_e4291de.js
10/26/2005 19:40 PM 21,690 ebayfooter_e4291de.js
09/05/2005 19:46 PM 1,431 eBayLogoTM.gif
10/26/2005 19:40 PM 13,263 ebaysup_e4291de.js
10/26/2005 19:41 PM 519 fanshop_70x20.gif
10/26/2005 19:41 PM 68,712 fp2nc1.jpg
10/26/2005 19:41 PM 68,105 fp2nc2.jpg
10/26/2005 19:41 PM 59,479 fp2nc3.jpg
10/26/2005 19:41 PM 67,575 fp2nc4.jpg
10/26/2005 19:41 PM 58,120 fp2nc5.jpg
10/26/2005 19:41 PM 1,114 ftr1_pattern3.gif
10/26/2005 19:41 PM 124 ftr1bkgd_pattern3.gif
10/26/2005 19:41 PM 1,060 ftr2_pattern3.gif
10/26/2005 19:41 PM 124 ftr2bkgd_pattern3.gif
10/26/2005 19:41 PM 969 hdr1_pattern3.gif
10/26/2005 19:41 PM 91 hdr1bkgd_pattern3.gif
10/26/2005 19:41 PM 958 hdr2_pattern3.gif
10/26/2005 19:41 PM 92 hdr2bkgd_pattern3.gif
10/26/2005 19:40 PM 168 help.gif
10/26/2005 19:47 PM 244 honesty-counter.gif
08/07/2005 19:57 PM 167 iconAssurance_16x16.gif
08/07/2005 19:52 PM 261 iconDownArrow_20x20.gif
08/07/2005 19:52 PM 260 iconLtArrow_20x20.gif
10/26/2005 19:41 PM 172 iconRedStar_25x25.gif
10/26/2005 19:41 PM 1,455 left1_pattern3.gif
10/26/2005 19:41 PM 1,455 left1bkgd_pattern3.gif
08/07/2005 19:52 PM 45 leftLine_16x3.gif
10/26/2005 19:41 PM 46,812 logohans.jpg
10/26/2005 19:40 PM 238 myebay.gif
10/26/2005 19:41 PM 6,428 PowersellerLogo150x150.gif
08/17/2005 12:36 PM 294 psIcon_50x25.gif
10/26/2005 19:41 PM 1,324 right1_pattern3.gif
10/26/2005 19:41 PM 1,324 right1bkgd_pattern3.gif
10/26/2005 19:41 PM 8,043 rtm_e4291de.js
08/07/2005 19:52 PM 49 s.gif
09/05/2005 19:46 PM 225 sell.gif
08/07/2005 19:55 PM 1,757 tagline.gif
10/26/2005 19:41 PM 630 toolbar_70x20.gif
08/07/2005 19:52 PM 111 topLeft_12x12.gif
08/07/2005 19:52 PM 112 topRight_12x12.gif
10/26/2005 19:41 PM 73,170 viewitem_e4291de.js
10/26/2005 19:41 PM 34,137 viewitembody_e4291de.js
48 File(s) 612,931 bytes

Directory of D:\Quotations and Correspondence\Deckel\Auctions\FP4NC with Dialog 4_files

10/26/2005 19:46 PM <DIR> .
10/31/2005 21:30 PM <DIR> ..
10/26/2005 19:41 PM 994 70x20_unterwegs_0105.gif
08/17/2005 12:36 PM 226 aboutme-small.gif
08/07/2005 19:52 PM 48 bullet_blk.gif
09/05/2005 19:46 PM 152 buyOn.gif
10/26/2005 19:41 PM 1,983 cip.gif
09/05/2005 19:46 PM 221 comm.gif
10/26/2005 19:40 PM 67,000 ebaybase_e4291de.js
10/26/2005 19:40 PM 21,690 ebayfooter_e4291de.js
09/05/2005 19:46 PM 1,431 eBayLogoTM.gif
10/26/2005 19:40 PM 13,263 ebaysup_e4291de.js
10/26/2005 19:41 PM 519 fanshop_70x20.gif
10/26/2005 19:45 PM 53,031 fp4nc-11.jpg
10/26/2005 19:45 PM 62,662 fp4nc-12.jpg
10/26/2005 19:45 PM 70,974 fp4nc-15.jpg
10/26/2005 19:45 PM 66,512 fp4nc-16.jpg
10/26/2005 19:45 PM 51,655 fp4nc-17.jpg
10/26/2005 19:45 PM 57,150 fp4nc-18.jpg
10/26/2005 19:41 PM 1,114 ftr1_pattern3.gif
10/26/2005 19:41 PM 124 ftr1bkgd_pattern3.gif
10/26/2005 19:41 PM 1,060 ftr2_pattern3.gif
10/26/2005 19:41 PM 124 ftr2bkgd_pattern3.gif
10/26/2005 19:41 PM 969 hdr1_pattern3.gif
10/26/2005 19:41 PM 91 hdr1bkgd_pattern3.gif
10/26/2005 19:41 PM 958 hdr2_pattern3.gif
10/26/2005 19:41 PM 92 hdr2bkgd_pattern3.gif
10/26/2005 19:40 PM 168 help.gif
10/26/2005 19:45 PM 245 honesty-counter.gif
08/07/2005 19:57 PM 167 iconAssurance_16x16.gif
08/07/2005 19:52 PM 261 iconDownArrow_20x20.gif
08/07/2005 19:52 PM 260 iconLtArrow_20x20.gif
10/26/2005 19:41 PM 172 iconRedStar_25x25.gif
10/26/2005 19:41 PM 1,455 left1_pattern3.gif
10/26/2005 19:41 PM 1,455 left1bkgd_pattern3.gif
08/07/2005 19:52 PM 45 leftLine_16x3.gif
10/26/2005 19:41 PM 46,812 logohans.jpg
10/26/2005 19:40 PM 238 myebay.gif
10/26/2005 19:41 PM 6,428 PowersellerLogo150x150.gif
08/17/2005 12:36 PM 294 psIcon_50x25.gif
10/26/2005 19:41 PM 1,324 right1_pattern3.gif
10/26/2005 19:41 PM 1,324 right1bkgd_pattern3.gif
10/26/2005 19:41 PM 8,043 rtm_e4291de.js
08/07/2005 19:52 PM 49 s.gif
09/05/2005 19:46 PM 225 sell.gif
08/07/2005 19:55 PM 1,757 tagline.gif
10/26/2005 19:41 PM 630 toolbar_70x20.gif
08/07/2005 19:52 PM 111 topLeft_12x12.gif
08/07/2005 19:52 PM 112 topRight_12x12.gif
10/26/2005 19:41 PM 73,170 viewitem_e4291de.js
10/26/2005 19:41 PM 34,137 viewitembody_e4291de.js
49 File(s) 652,925 bytes

Directory of D:\Quotations and Correspondence\Deckel\Deckel Newsgroup

10/13/2004 21:20 PM <DIR> .
04/10/2006 21:44 PM <DIR> ..
10/13/2004 21:20 PM <DIR> Welcome to the Machine Shop Forum Deckel Buyer's Checklist_files
10/13/2004 21:20 PM 84,491 Welcome to the Machine Shop Forum Deckel Buyer's Checklist.htm
1 File(s) 84,491 bytes

Directory of D:\Quotations and Correspondence\Deckel\Deckel Newsgroup\Welcome to the Machine Shop Forum Deckel Buyer's Checklist_files

10/13/2004 21:20 PM <DIR> .
10/13/2004 21:20 PM <DIR> ..
09/20/2004 20:51 PM 249 close_topic.gif
09/20/2004 18:19 PM 3,213 datelib.js
09/20/2004 20:51 PM 268 delete_topic.gif
09/20/2004 20:51 PM 246 edit_ubb6.gif
09/20/2004 20:51 PM 119 email.gif
09/20/2004 20:51 PM 214 feature_topic.gif
09/20/2004 18:19 PM 14,141 lathelogo.jpg
09/20/2004 20:51 PM 237 move_topic.gif
09/20/2004 18:19 PM 3,523 mw_logo200x40.gif
09/20/2004 20:51 PM 120 next_topic.gif
09/20/2004 20:51 PM 79 posticon.gif
09/20/2004 20:51 PM 147 prev_topic.gif
09/20/2004 20:51 PM 901 print_topic.gif
09/20/2004 20:51 PM 217 priv_message.gif
09/20/2004 20:51 PM 110 profile.gif
09/20/2004 20:51 PM 1,401 reply6.jpg
09/20/2004 20:51 PM 1,495 topic6.jpg
09/20/2004 20:51 PM 94 ubb_friend_mini.gif
09/20/2004 20:51 PM 135 user_ratings_5.gif
19 File(s) 26,909 bytes

Directory of D:\Quotations and Correspondence\Deckel\Modifications

04/10/2006 21:44 PM <DIR> .
04/10/2006 21:44 PM <DIR> ..
04/10/2006 21:45 PM <DIR> Feed Motor on old style FP1
0 File(s) 0 bytes

Directory of D:\Quotations and Correspondence\Deckel\Modifications\Feed Motor on old style FP1

04/10/2006 21:45 PM <DIR> .
04/10/2006 21:44 PM <DIR> ..
12/06/2005 14:35 PM 719,760 GlDeckel01.jpg
12/06/2005 14:35 PM 739,329 GlDeckel02.jpg
2 File(s) 1,459,089 bytes

Directory of D:\Quotations and Correspondence\Deckel\My FP2

10/01/2003 21:27 PM <DIR> .
04/10/2006 21:44 PM <DIR> ..
06/26/2003 16:09 PM 965,011 Deckel FP2 Price Scribbling.pdf
06/26/2003 16:10 PM 565,928 Deckel FP2 Quotation.pdf
06/26/2003 16:11 PM 195,776 Deckel FP2 Tooling Description.pdf
06/26/2003 16:18 PM 2,215,036 Deckel Invoice.pdf
06/26/2003 16:17 PM 646,060 Drool for 1984 $352K.pdf
06/26/2003 16:18 PM 429,054 FP2 Purchase Receipt (1976).pdf
01/29/2003 15:32 PM 842,700 FP2 Tooling that was for sale.pdf
7 File(s) 5,859,565 bytes

Directory of D:\Quotations and Correspondence\Deckel\My old FP1 machines

10/01/2003 21:27 PM <DIR> .
04/10/2006 21:44 PM <DIR> ..
06/26/2003 12:56 PM 456,428 Another FP1 I sold.pdf
06/26/2003 17:11 PM 253,428 My Original FP1 (ex-HP).pdf
2 File(s) 709,856 bytes

Directory of D:\Quotations and Correspondence\Deckel\OLD pictures of a Deckel

08/21/2004 14:38 PM <DIR> .
04/10/2006 21:44 PM <DIR> ..
08/21/2004 14:35 PM 89,031 DSW17_1.jpgdeckel_copy.jpg
08/21/2004 14:35 PM 115,468 DSW17_2.jpgdeckel_copy.jpg
08/21/2004 14:35 PM 114,797 DSW17_3.jpgdeckel_copy.jpg
08/21/2004 14:35 PM 111,635 DSW17_4.jpgdeckel_copy.jpg
08/21/2004 14:38 PM 35,548 Old Deckel Photos.pdf
5 File(s) 466,479 bytes

Directory of D:\Sales Collateral\Aciera

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/13/2004 22:53 PM 944,614 Aciera F1 (Manual).pdf
11/13/2004 22:51 PM 1,247,483 Aciera F1 CNC.pdf
11/13/2004 22:37 PM 19,401,957 Aciera F1.pdf
01/26/2006 10:08 AM 6,678,256 Aciera F4 Sales Brochure.pdf
11/13/2004 22:55 PM 930,105 Aciera F5 CNC.pdf
5 File(s) 29,202,415 bytes

Directory of D:\Sales Collateral\Alexander

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/03/2004 22:00 PM 4,992,925 Alexander Sales Brochure.pdf
11/03/2004 22:00 PM 19,452,343 Master Toolmaker Mill #2.pdf
11/03/2004 22:00 PM 48,279,709 Master Toolmaker Mill.pdf
3 File(s) 72,724,977 bytes

Directory of D:\Sales Collateral\Deckel

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/13/2004 23:07 PM 5,235,528 Deckel CNC Controls.pdf
11/03/2004 21:38 PM 12,685,456 Deckel CNC Sales Brochure.pdf
11/03/2004 21:38 PM 2,068,333 Deckel FP1 Fold-out.pdf
11/03/2004 21:39 PM 11,359,700 Deckel FP1.pdf
11/03/2004 21:39 PM 10,240,089 Deckel FP2 (second ver).pdf
11/03/2004 21:39 PM 8,857,060 Deckel FP2.pdf
11/03/2004 21:39 PM 7,194,060 Deckel FP3.pdf
05/13/2006 08:43 AM 2,560,917 Deckel FP4A with Contour 2 Brochure.pdf
02/13/2006 20:19 PM 2,560,917 Deckel FP4NC Contour 2 Brochure.pdf
09/23/2005 08:38 AM 8,744,793 Deckel GK Sales Brochure.pdf
02/23/2005 22:41 PM 4,646,387 Deckel GK Pantograph Brochure.pdf
02/23/2005 22:28 PM 510,850 Deckel KF Copy Mill Insert.pdf
02/23/2005 22:25 PM 8,200,583 Deckel KF Copy Mill.pdf
04/02/2005 09:59 AM 4,875,241 Deckel Machine Tool Brochure (2.pdf
02/10/2005 16:03 PM 5,238,442 Deckel Model G Letter Engraver .pdf
11/03/2004 21:40 PM 1,670,879 Deckel Product Line #2.pdf
11/03/2004 21:40 PM 11,976,077 Deckel Product Line.pdf
11/03/2004 21:40 PM 11,322,794 Deckel Tool Cabinet Inserts.pdf
11/03/2004 21:40 PM 15,452,807 Deckel Tools & Accessories, 1986.pdf
11/03/2004 21:40 PM 24,561,451 Factory Tour.pdf
11/03/2004 21:41 PM 4,692,560 GK12 and GK21 Sales Brochure (Color).pdf
11/03/2004 21:41 PM 16,709,670 GK12 and GK21 Sales Brochure.pdf
11/03/2004 21:41 PM 5,595,816 LKD Sales Brochure.pdf
11/03/2004 21:41 PM 887,189 Maho Product Line.pdf
11/03/2004 21:41 PM 8,198,930 SO Grinder.pdf
11/03/2004 21:42 PM 23,054,670 Tools and Accessories (1977).pdf
26 File(s) 219,101,199 bytes

Directory of D:\Sales Collateral\Habegger

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/11/2004 20:26 PM 1,295,087 Habegger 102 Lathes.pdf
11/11/2004 20:41 PM 5,425,767 Habegger Accessories.pdf
11/11/2004 21:02 PM 2,744,739 Habegger Price List (German).pdf
11/11/2004 20:56 PM 1,244,787 Habegger Toolmaker Lathes.pdf
4 File(s) 10,710,380 bytes

Directory of D:\Sales Collateral\Lorch

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
07/29/2004 09:58 AM 1,398,497 LAS Sales Brochure.pdf
07/29/2004 09:51 AM 554,402 Levin Collet Set.pdf
07/29/2004 10:49 AM 68,688 Logo.pdf
06/15/2006 09:11 AM 7,602,715 Lorch LAS 1960 price quote and info.pdf
06/15/2006 09:09 AM 5,112,559 Lorch LAS and LLK brochure #2.pdf
06/15/2006 09:09 AM 25,522,025 Lorch LAS and LLK brochure.pdf
06/15/2006 09:11 AM 2,621,872 Lorch LAS and LLK Price List (1966 USD).pdf
06/15/2006 09:10 AM 2,316,357 Lorch LAS and LLK Price List (1967 USD).pdf
06/15/2006 09:11 AM 1,533,092 Lorch LAS and LLK Price List (1970 USD).pdf
06/15/2006 09:10 AM 1,506,192 Lorch LAS brochure #2.pdf
07/29/2004 09:52 AM 3,729,407 Pamphlet Binder.pdf
11 File(s) 51,965,806 bytes

Directory of D:\Sales Collateral\Maho

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
10/03/2003 10:26 AM 5,139,272 Maho Sales Brochure (additional).pdf
10/03/2003 10:16 AM 3,154,449 Maho Sales Brochure.pdf
2 File(s) 8,293,721 bytes

Directory of D:\Sales Collateral\Schaublin

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
11/21/2004 22:33 PM <DIR> Lathes
08/03/2005 19:22 PM <DIR> Schaublin 13
11/19/2004 16:01 PM 4,515,197 Schaublin Product Line.pdf
10/07/2003 13:29 PM 779,178 Schaublin Sales Line Card.pdf
2 File(s) 5,294,375 bytes

Directory of D:\Sales Collateral\Schaublin\Lathes

11/21/2004 22:33 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
10/23/2004 17:54 PM 65,310,172 BABIN - Schaublin 102 Toolmaker's, Second-Operation, & Turret Lathe.pdf
10/23/2004 17:03 PM 29,997,202 BABIN - Schaublin 70 Lathe.pdf
10/07/2003 12:02 PM 546,017 Schaublin 102 Accessory Prices.pdf
10/07/2003 13:21 PM 2,252,145 Schaublin 102 Sales Brochure (another).pdf
10/06/2003 17:49 PM 45,007,979 Schaublin 102 Sales Brochure.pdf
11/11/2004 22:13 PM 22,065,013 Schaublin 102N lathe.pdf
11/04/2004 22:48 PM 1,130,485 Schaublin 70 front cover.pdf
11/11/2004 22:44 PM 11,139,330 Schaublin 70 lathes.pdf
11/04/2004 22:47 PM 1,198,472 Schaublin back cover.pdf
10/06/2003 11:25 AM 38,043,123 Schaublin Sales Brochure.pdf
10/07/2003 13:29 PM 779,178 Schaublin Sales Line Card.pdf
11 File(s) 217,469,116 bytes

Directory of D:\Sales Collateral\Schaublin\Schaublin 13

08/03/2005 19:22 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
10/07/2003 12:02 PM 3,130,840 Schaublin 13 Accessory Prices.pdf
01/28/2003 11:07 AM 6,030,524 Schaublin 13 Sales Collateral.pdf
08/03/2005 19:22 PM 204,418 Slotting head.pdf
3 File(s) 9,365,782 bytes

Directory of D:\Sales Collateral\SIP

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
02/10/2005 15:21 PM 14,873,901 SIP Product Line.pdf
1 File(s) 14,873,901 bytes

Directory of D:\Sales Collateral\Sixis

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
01/04/2006 15:40 PM 310,913 S101 Sales Brochure.pdf
1 File(s) 310,913 bytes

Directory of D:\Sales Collateral\Wohlhaupter

08/05/2006 12:00 PM <DIR> .
08/05/2006 12:00 PM <DIR> ..
10/03/2003 10:10 AM 3,099,380 Wolhaupter Sales Brochure.pdf
1 File(s) 3,099,380 bytes

Total Files Listed:
642 File(s) 2,938,721,402 bytes
255 Dir(s) 0 bytes free
 

wrench

Titanium
Joined
Jul 9, 2002
Location
Sunnyvale, CA
Please note that my PM email queue is already backed up due to the need to archive messages someday.

Please send emails to deckel DOT dvd THEN_AT gmail.com. Obviously you replece the DOT with a '.' and the THEN_AT with a '@'. Sorry, bots are good at extracting this info.

This email works for PayPal too, although I would prefer to not pay their fees.

--Alan
 

HelEx

Hot Rolled
Joined
Mar 29, 2005
Location
Canberra, Australia
Wrench,

How much is the PayPal fee? I'd like to use PayPal and pay you the extra in compensation. Unless their fee is outrageous I'd appreciate the simplicity.
It's great that you've done this as a service to the Deckel appreciater's network, thank you very much.

- Mike -
 

wrench

Titanium
Joined
Jul 9, 2002
Location
Sunnyvale, CA
Hi guys... Thanks for the kind words. Actually, I already factored the PayPal in there as I think it is easiest for most. And I figured four pricing schemes was more difficult to administer than just two. I can tell you that for the old CD, I paid about $3.50 for the PayPal fees. I'm guessing for $86 is would be about $4.25 or so. But, that is just a matter of curiosity as I already added that in. In fact, I should say that a reduction is in order if you use a check.... But some of this all comes out in the wash... Doing international is significantly more difficult because I have forms to fill out, increased postage and, worst of all, I have to go to the Post Office. I've just tried to keep things simple.

--Alan
 

Brian

Stainless
Joined
Jul 20, 2002
Location
Phoenix, AZ USA
Alan,

I'm a tad confused, and just so I understand clearly, is the price for the DVD $86 if you didn't buy the original cd and $46 if you did?

Thanks for taking on a "thankless job", most have no idea what a labor of love type of thing this really is.... to cough up the money for DVD duplicators and invest so much personal time.... my hat is off to you!
 

wrench

Titanium
Joined
Jul 9, 2002
Location
Sunnyvale, CA
Hi Brian,
Yes, I thought that it would only be fair to try and discount people who had helped support this effort from the beginning, otherwise they are paying twice for some of the material. It is a slippery slope, however. How much to discount? In truth, the majority of the poeple likely to get this DVD probably already got the CD, and there are hard expenses in there (I neglected to mention taxes). So I tried to strike a mental compromise between "reasonable" and something that would allow me to recoup the expenses.

So... If you previously got a CD, then the DVD is $46. If you never got the CD, then the DVD is $86.

Alan
 

wrench

Titanium
Joined
Jul 9, 2002
Location
Sunnyvale, CA
Payment via PayPal:

Please send emails to deckel DOT dvd THEN_AT gmail.com. Obviously you replece the DOT with a '.' and the THEN_AT with a '@'. Sorry, bots are good at extracting this info.

Payment via other means:
Please email me and I will send you my address.

Thanks!
 

bisterbob

Plastic
Joined
Jan 8, 2003
Location
minnesota
Hello Wrench,

I sent a payment for your CD by PayPal on 9/27 and an email to the above address a few weeks later and haven't been able to reach you.

--Bob
 

wrench

Titanium
Joined
Jul 9, 2002
Location
Sunnyvale, CA
Hi Bob...
Sorry, I don't recall seeing either. Missing the PayPal is surprising easy to do, but the email is what really concerns me.

I have checked my PayPal and found your payment, and I do not recall ever having sent something to your address, so clearly you are correct (my actual records are not with me now). I will credit you back some funds for my error and send the DVD out to your tomorrow.

Again, I apologize for the delay. But thank you for letting me know about it.

Best regards,
Alan
 

rkdeckel

Aluminum
Joined
Sep 27, 2005
Location
michigan
Alan,
Please send your address I would like to purchase dvd,and mail you a money order, would that be OK for payment?
Thanks
Roger
 








 
Top