strandberg
Plastic
- Joined
- Jun 30, 2019
I got my hands on a pretty rough, old Deckel single lip grinder, a Deckel G.S. It's a fairly old machine and I haven't been able to find much of any information on it online.
Bronze bearings, no integrated motor mount, smaller than the S0, less movement options on the work head, uses some old collets that seem to be 1/2" outside diameter.
Mine only came with one knackered collet so I probably have to make my own, or make a new tube that can use some more readily available collets instead.
It's. Missing the "caps / plugs / lids /oilers)" over the oiling points, anyone know what these should look like and work? Maybe the same ones are used on some other old Deckels.
I found an old eBay ad with some photos of one but it didn't really answer any of my questions unfortunately.
I'll post some photos from my computer in a little bit.
Here's the (newer) one from the ebay archive:
Bronze bearings, no integrated motor mount, smaller than the S0, less movement options on the work head, uses some old collets that seem to be 1/2" outside diameter.
Mine only came with one knackered collet so I probably have to make my own, or make a new tube that can use some more readily available collets instead.
It's. Missing the "caps / plugs / lids /oilers)" over the oiling points, anyone know what these should look like and work? Maybe the same ones are used on some other old Deckels.
I found an old eBay ad with some photos of one but it didn't really answer any of my questions unfortunately.
I'll post some photos from my computer in a little bit.
Here's the (newer) one from the ebay archive: