Deckel maho DMU 50M DNC cable

[Dadobojanic]

Greetings. We bought machine from title with heidenhain TNC 310 control. I am trying to connect it to pc. Problem is i dont have cable so i decided to make my own. DNC is Dsub25 pin female. On my end i have Dsub9. I was reading all kind of manuals where they show schematic from logic to adaptor to out of machine. But they all end up as 25 to 25 pin cable. I have spent hours and hours of soldering to try to find solution. And there is no solution for me i cant get any connection. So if anyone knows pinout from 25 to 9 Dsub connector i would be thankful for help.

 

[Dadobojanic]

Anyone???

 

[BugRobotics]

Page 181 in the TNC 310 manual shows the connection at the TNC:



Can you share what you have done? Are you connecting to a DB25 on the outside of the machine enclosure? Pics and schematics showing what you have done is helpful.

 

[Vik300001]

Help. The machine DMU 50 and TNC310 does not move on two or three axes at the same time. Writes that the function is disabled in the plc. How can I make it move along two and three coordinates at the same time?