What's new
What's new

Dial indicators, Mics, Insert holder, and a little more

SteveM

Diamond
Joined
Sep 22, 2005
Location
Connecticut
OK, I will take the carriage stop 10e and the 9J that is a thinbit

Steve

I'll add the following, if not taken:
2G) Starrett 196 Works great $12
5A) Starrett 445-A2 -3RL very nice $35
8H) .73 X 1.47 X 1.98 $20 for the pair

Please see my email with questions on toolholders.

Steve
 

lazz

Stainless
Joined
Feb 12, 2012
Location
The warm desert of Phoenix Arizona
This is a revised list...


Almost all of these tools came from 2 places. The first group was last calibrated in the early 1989 to 1992 and the second group was calibrated in 1997 . Needless to say the oil in several of these tools has vanished leaving a residue. A few indicaters stick now and then at first then work just fine afterwards. NONE of them are stuck.



Picture #1 Click here to see more pictures

View attachment 347675



A) Central Machine Bore gauge 2"-6" like new $50
B) Central Machine 201 sticks now and then $15
E) Mitutoyo 2507-08 works fine Needs cleaned $25
F) Ames .0001 works fine Needs cleaned $15
G) Mitutoyo 7300 & 2412 .001- .400 $25
H) Ames .001 Thickness gauge $12
M) Federal D81S $17.50
N) Import .001 - 1" $8
O) Mitutoyo 2416-10 .001 -1" no lock scratched $12
P) Mitutoyo 2416 .001-1" $20 Click for a close up picture.
Q) Ames 3222 .001- 2 coule use a new crystal $15
S) Teclock A1-921 .001- 1" $8 Click for a close up picture.
T) Ames 203 cloudy .001 $5 Click for a close up picture.
X) Hardinge J2-c100-1000 .001- 1" cracked crystal $5
Z) Teclock .001- 1" scratched $5



Picture #2 Click here to see more pictures
View attachment 347676



A) Starrett 711 last word .0005 Like new, It may need fresh oil after sitting for 20 plus years in a garage in Phoenix. $70(Joe)
B) Mitutoyo 513-902 .0005 like new $80 (Joe)
G) <<<SPOKEN FOR>>>Starrett 196 Works great $12
H) Sheffield .0001 Slow return oil might speed things up. $10(Joe)
I) Testmaster .001 great working condition no box $30
L) Brown& Sharpe Best Test .0005 Works great no box $35
M) Federal V81 .001 can stick $5
O) Verdict .00o5 works loose crystal $3
P) Ames .001 works loose crystal $5



Picture #3 Click here to see more pictures
View attachment 347677



J) Starrett 230 nice $20(Joe)



Picture #4 Click here to see more pictures
View attachment 347678



A) JTSlocomb Co 11"12" with standard $30
B) Brown & Sharpe 1"-2" $5 (Joe)
C) Brown & Sharpe 3"-4" $12
D) Starrett 436 3"-4" $12
E) Brown & Sharpe #63 1"-2" $12
F) Brown & Sharpe #64 .0001 $15
G) Brown & Sharpe #64 75mm - 100 mm $15
H) Craftsman .0001 Germany $15
I) Ammco .300- 1.300 $5
J) Brown & Sharpe #12 $3
L) No Name 15mm $3
N) Starrett #2 1"-2" worn $5



Picture #5 Click here to see more pictures
View attachment 347679



A) <<<SPOKEN FOR>>>Starrett 445-A2 -3RL very nice $35
B) Nsk 0-6" $20
D) Starrett 445 0-6" Nice with a dirty box $50
F) Starrett 454 11" height gauge 1n/mm $45
G) Starrett 446A 0-2.5" $7.50
H) Starrett 20 6" square nice with owner markings $30 (Joe)
I) Starrett Mech tech with extra tips $25
J) Starrett 448 0-12" vernier depth gauge $40
L) Starrett 823S ID mic $15


Picture #6 Click here to see more pictures

View attachment 347684



A) Brown & Sharpe 599-754-28-1 5" $45 for the pair (Joe)
B) Brown & Sharpe 754-e 4" $30 for the pair(Joe)
E) #3 MT drift and mt4-mt3, mt3-mt2 sleeves $12 for all(Joe)
F) BB 12" caliper works well no crystal $5(Joe)
I) Machinist Handbook 1968 $20
N) no name thread gauge $2(Joe)



Picture #7 Click here to see more pictures

View attachment 347683




C) Mag base holder $5 (Joe)
F) Steward Warner Mechanical Tachometer $70
H) Small taps $5 (Joe)
I) Large taps $10 (Joe)
J) Small taps $5 (Joe)
L) Punches $7.50 (Joe)


Picture #8 Click here to see more pictures
View attachment 347682



B,C) Custom gauge block set $20 each
F) .945 X 2.22 X 4.67 $30 for the pair
H) <<<SPOKEN FOR>>>.73 X 1.47 X 1.98 $20 for the pair
M) Ridgid Supreme 1/2 drill chuck with key and MT#2 shank. very clean $20(Joe)
N) Albrecht 1/32 - 1/2" drill chuck with #2 MT $110
O) Albrecht 1/32 - 1/2" drill chuck with #2 MT $95


Picture #9 Click here to see more pictures
View attachment 347681



A,B,C,D) Your choice $10 each
A1, A2, A3, A4
B1, B2, B3, B6
D1, D2
E,F,G,H,I,J,L) your choice $5 each
E2, E3
F2, F3, F4, F5
G2, G3
H2
I2
<<<SPOKEN FOR>>>J2
L2, L3, L4, L5, L6, L7, L8, L9, L10,L11, L12,
L13, L14, L15, L16, L17, L18, L19, L20, L21



Picture #10 Click here to see more pictures
View attachment 347680



A) No name crusty and rusty die head... $25
C) Pneumatic tools Tx-1-B scaler lightly used $100
E) South Bend heavy 10 carriage stop $135
F) <<<SPOKEN FOR>>>Broken lathe carriage stop $10
 

SteveM

Diamond
Joined
Sep 22, 2005
Location
Connecticut
I'll add the following, if not taken:
2G) Starrett 196 Works great $12
5A) Starrett 445-A2 -3RL very nice $35
8H) .73 X 1.47 X 1.98 $20 for the pair

Please see my email with questions on toolholders.

Steve

I'll add the following, if not already spoken for:
9E1, 9E2 and 9E3
9H1 & 9H2

Steve
 
Last edited:

rrrgcy

Aluminum
Joined
Jun 5, 2013
Location
South Florida
All items received safely and as described, excellently packaged. Always seems like xMAS when the packages from you arrive, like a treasure hunt!
 

lazz

Stainless
Joined
Feb 12, 2012
Location
The warm desert of Phoenix Arizona
The following is a list of stuff taking space I want to reclaim.
If you can use any of this lets talk.




Picture #1 Click here to see more pictures

View attachment 347675



A) Central Machine Bore gauge 2"-6" like new $50
B) Central Machine 201 sticks now and then $15
E) Mitutoyo 2507-08 works fine Needs cleaned $25
F) Ames .0001 works fine Needs cleaned $15
H) Ames .001 Thickness gauge $12
M) Federal D81S $17.50
N) Import .001 - 1" $8
O) Mitutoyo 2416-10 .001 -1" no lock scratched $12
P) <<<SPOKEN FOR>>> Mitutoyo 2416 .001-1" $20 Click for a close up picture.
Q) Ames 3222 .001- 2 coule use a new crystal $15
S) Teclock A1-921 .001- 1" $8 Click for a close up picture.
T) Ames 203 cloudy .001 $5 Click for a close up picture.
X) Hardinge J2-c100-1000 .001- 1" cracked crystal $5
Z) Teclock .001- 1" scratched $5



Picture #2 Click here to see more pictures
View attachment 347676



A) Starrett 711 last word .0005 Like new, It may need fresh oil after sitting for 20 plus years in a garage in Phoenix. $70(Joe)
B) Mitutoyo 513-902 .0005 like new $80 (Joe)
G) <<<SPOKEN FOR>>>Starrett 196 Works great $12
I) Testmaster .001 great working condition no box $30
M) Federal V81 .001 can stick $5
O) Verdict .00o5 works loose crystal $3
P) Ames .001 works loose crystal $5



Picture #3 Click here to see more pictures
View attachment 347677


F) Brown& Sharpe 0-1 with ball attachment $10
J) <<<SPOKEN FOR>>> Starrett 230 nice $20(Joe)



Picture #4 Click here to see more pictures
View attachment 347678



A) JTSlocomb Co 11"12" with standard $30
B) Brown & Sharpe 1"-2" $5 (Joe)
D) Starrett 436 3"-4" $12
E) Brown & Sharpe #63 1"-2" $12
F) Brown & Sharpe #64 .0001 $15
G) Brown & Sharpe #64 75mm - 100 mm $15
H) Craftsman .0001 Germany $15
I) Ammco .300- 1.300 $5
J) Brown & Sharpe #12 $3
L) No Name 15mm $3
N) Starrett #2 1"-2" worn $5



Picture #5 Click here to see more pictures
View attachment 347679



B) Nsk 0-6" $20
D) Starrett 445 0-6" Nice with a dirty box $50
G) Starrett 446A 0-2.5" $7.50
H) Starrett 20 6" square nice with owner markings $30 (Joe)
I) Starrett Mech tech with extra tips $25
J) Starrett 448 0-12" vernier depth gauge $40
L) <<<SPOKEN FOR>>> Starrett 823S ID mic $15


Picture #6 Click here to see more pictures

View attachment 347684



A) Brown & Sharpe 599-754-28-1 5" $45 for the pair (Joe)
B) Brown & Sharpe 754-e 4" $30 for the pair(Joe)
E) #3 MT drift and mt4-mt3, mt3-mt2 sleeves $12 for all(Joe)
F) BB 12" caliper works well no crystal $5(Joe)
I) <<<SPOKEN FOR>>> Machinist Handbook 1968 $20
N) no name thread gauge $2(Joe)



Picture #7 Click here to see more pictures

View attachment 347683




C) Mag base holder $5 (Joe)
F) Steward Warner Mechanical Tachometer $70
H) Small taps $5 (Joe)
I) Large taps $10 (Joe)
J) Small taps $5 (Joe)


Picture #8 Click here to see more pictures
View attachment 347682



F) .945 X 2.22 X 4.67 $30 for the pair
M) Ridgid Supreme 1/2 drill chuck with key and MT#2 shank. very clean $20(Joe)
N) Albrecht 1/32 - 1/2" drill chuck with #2 MT $110
O) Albrecht 1/32 - 1/2" drill chuck with #2 MT $95


Picture #9 Click here to see more pictures
View attachment 347681



A,B,C,D) Your choice $10 each
A1, A2, A3
B1, B2, B3, B6
D1, D2
E,F,G,H,I,J,L) your choice $5 each
F2, F3, F4, F5
L2, L3, L4, L5, L6, L7, L8, L9, L10,L12,
L13, L14, L15, L16, L17, L18, L19, L20, L21



Picture #10 Click here to see more pictures
View attachment 347680



A) No name crusty and rusty die head... $25
E) South Bend heavy 10 carriage stop $135
 
Last edited:

rrrgcy

Aluminum
Joined
Jun 5, 2013
Location
South Florida
I’ll take these, please see Pm?

Pic 1 - P) Mitutoyo 2416 .001-1" $20
Attachment 347677- J) Starrett 230 nice $20(Joe)
Pic 5 - L) Starrett 823S ID mic $15
Pic 6 - I) Machinist Handbook 1968 $20
 

animal12

Cast Iron
Joined
Apr 9, 2009
Location
CA USA
My package arrived yesterday safely packaged & as advertised
thanks Ron
& thanks again for the repackage
pleasure doing business with you
animal
 

SteveM

Diamond
Joined
Sep 22, 2005
Location
Connecticut
The post office did their best to ensure that the package was damaged, but they were no match for Lazz.

Everything survived the journey in excellent shape despite the package being more round than cubic (shows the value of strapping tape).

Steve
 

rrrgcy

Aluminum
Joined
Jun 5, 2013
Location
South Florida
Okay, please see PM for a possible 3rd round, I’d like:

Pic 1 O) Mitutoyo 2416-10 .001 -1" no lock scratched $12
Pic 4 J) Brown & Sharpe #12 $3
Pic 5 G) Starrett 446A 0-2.5" $7.50
Pic 6 B) Brown & Sharpe 754-e 4" $30 for the pair(Joe)
Pic 8 M) Ridgid Supreme 1/2 drill chuck with key and MT#2 shank. very clean $20(Joe)
 

lazz

Stainless
Joined
Feb 12, 2012
Location
The warm desert of Phoenix Arizona
The is not much left if you can use it lets make a deal.
In the link above the pictures are close ups of most if not all.


Picture #1 Click here to see more pictures

View attachment 347675



A) Central Machine Bore gauge 2"-6" like new $50
B) Central Machine 201 sticks now and then $15
E) Mitutoyo 2507-08 works fine Needs cleaned $25
F) Ames .0001 works fine Needs cleaned $15
H) Ames .001 Thickness gauge $12
M) Federal D81S $17.50
N) Import .001 - 1" $8
Q) Ames 3222 .001- 2 coule use a new crystal $15
S) Teclock A1-921 .001- 1" $8 Click for a close up picture.
T) Ames 203 cloudy .001 $5 Click for a close up picture.
X) Hardinge J2-c100-1000 .001- 1" cracked crystal $5
Z) Teclock .001- 1" scratched $5



Picture #2 Click here to see more pictures
View attachment 347676



A) Starrett 711 last word .0005 Like new, It may need fresh oil after sitting for 20 plus years in a garage in Phoenix. $70(Joe)
B) Mitutoyo 513-902 .0005 like new $80 (Joe)
M) Federal V81 .001 can stick $5
O) Verdict .00o5 works loose crystal $3
P) Ames .001 works loose crystal $5



Picture #3 Click here to see more pictures
View attachment 347677


F) Brown& Sharpe 0-1 with ball attachment $10



Picture #4 Click here to see more pictures
View attachment 347678



A) JTSlocomb Co 11"12" with standard $30
B) Brown & Sharpe 1"-2" $5 (Joe)
D) Starrett 436 3"-4" $12
E) Brown & Sharpe #63 1"-2" $12
F) Brown & Sharpe #64 .0001 $15
G) Brown & Sharpe #64 75mm - 100 mm $15
H) Craftsman .0001 Germany $15
L) No Name 15mm $3



Picture #5 Click here to see more pictures
View attachment 347679



B) Nsk 0-6" $20
D) Starrett 445 0-6" Nice with a dirty box $50
H) Starrett 20 6" square nice with owner markings $30 (Joe)
I) Starrett Mech tech with extra tips $25
J) Starrett 448 0-12" vernier depth gauge $40


Picture #6 Click here to see more pictures

View attachment 347684



A) Brown & Sharpe 599-754-28-1 5" $45 for the pair (Joe)
E) #3 MT drift and mt4-mt3, mt3-mt2 sleeves $12 for all(Joe)
F) BB 12" caliper works well no crystal $5(Joe)
N) no name thread gauge $2(Joe)



Picture #7 Click here to see more pictures

View attachment 347683




C) Mag base holder $5 (Joe)
F) Steward Warner Mechanical Tachometer $70
H) Small taps $5 (Joe)
I) Large taps $10 (Joe)
J) Small taps $5 (Joe)


Picture #8 Click here to see more pictures
View attachment 347682



F) .945 X 2.22 X 4.67 $30 for the pair
N) Albrecht 1/32 - 1/2" drill chuck with #2 MT $110
O) Albrecht 1/32 - 1/2" drill chuck with #2 MT $95


Picture #9 Click here to see more pictures
View attachment 347681



C,D) Your choice $10 each

B1, B2, B3, B6

E,F,G,H,I,J,L) your choice $5 each
F2, F3, F4, F5
L2, L3, L5, L6, L7, L8, L10,L12,
L13, L15, L16, L19, L20, L21



Picture #10 Click here to see more pictures
View attachment 347680



A) No name crusty and rusty die head... $25
E) South Bend heavy 10 carriage stop $135
 








 
Top