What's new
What's new

Dial indicators, Mics, Insert holder, and a little more

lazz

Stainless
Joined
Feb 12, 2012
Location
The warm desert of Phoenix Arizona
Okay Im ready... Lets do this..



As usual I dont care about payment.... Mail me a check.... paypal ...what ever you wanna do works for me.
First dibs are awarded to the first post. Send a follow up PM and tell me how you wanna pay and Ill get you the necessary details.

Shipping.... Everything will be plus shipping....Im sending this via USPS flat rate boxes.... The cheapest rate possible....


Almost all of these tools came from 2 places. The first group was last calibrated in the early 1989 to 1992 and the second group was calibrated in 1997 . Needless to say the oil in several of these tools has vanished leaving a residue. A few indicaters stick now and then at first then work just fine afterwards. NONE of them are stuck.



Picture #1

20220420_153843.jpg



A) Central Machine Bore gauge 2"-6" like new $50
B) Central Machine 201 sticks now and then $15
C) <<<SPOKEN FOR>>>Hamilton HE50-01 thickness gauge smooth operation needs exterior cleaning. $8
D) <<<SPOKEN FOR>>> CDI 2-250-125-5 USA .0005 Nice $25 (Joe)
E) Mitutoyo 2507-08 works fine Needs cleaned $25
F) Ames .0001 works fine Needs cleaned $15
G) <<<SPOKEN FOR>>>Mitutoyo 7300 & 2412 .001- .400 $25
H) Ames .001 Thickness gauge $12
I) <<<SPOKEN FOR>>> Mitutoyo 7322 & 2410 ,001-1" can stick when opening to the extreme ... not always $20
J) <<<SPOKEN FOR>>> Starrett 196A $20
L) <<<SPOKEN FOR>>> Federal D8it-R1 .001-2" crystal loose... a candidate for super glue. no lock $12
M) Federal D81S $17.50
N) Import .001 - 1" $8
O) Mitutoyo 2416-10 .001 -1" no lock scratched $12
P) Mitutoyo 2416 .001-1" $20 Click for a close up picture.
Q) Ames 3222 .001- 2 coule use a new crystal $15
S) Teclock A1-921 .001- 1" $8 Click for a close up picture.
T) Ames 203 cloudy .001 $5 Click for a close up picture.
X) Hardinge J2-c100-1000 .001- 1" cracked crystal $5
Z) Teclock .001- 1" scratched $5



Picture #2
20220420_162222.jpg



A) Starrett 711 last word .0005 Like new, It may need fresh oil after sitting for 20 plus years in a garage in Phoenix. $70(Joe)
B) Mitutoyo 513-902 .0005 like new $80 (Joe)
C) <<<SPOKEN FOR>>> Enco .001- 2" Unused $22.50
D) <<<SPOKEN FOR>>> Teclock .001-2" Japan like new $27.50
E) <<<SPOKEN FOR>>> Compac Swiss .0001 M.47 Fresh oil could be good. $30
F) <<<SPOKEN FOR>>> Federal B3W .001 works great $12
G) Starrett 196 Works great $12
H) Sheffield .0001 Slow return oil might speed things up. $10(Joe)
I) Testmaster .001 great working condition no box $30
J) <<<SPOKEN FOR>>> Brown& Sharpe 7022 .00005 Works great no box $75
L) Brown& Sharpe Best Test .0005 Works great no box $35
M) Federal V81 .001 can stick $5
N) <<<SPOKEN FOR>>> Pratt & Whitney 115 .001 works great loose crystal $5
O) Verdict .00o5 works loose crystal $3
P) Ames .001 works loose crystal $5



Picture #3
20220420_170420.jpg



A) <<<SPOKEN FOR>>> Mitutoyo 293-721 0-1",293-722 1"-2", 293-723-102"-3" digital .0001 lightly used set with standards and new batteries. $200
B) <<<SPOKEN FOR>>> Brown & Sharpe #72 7"-8" no standard nice lightly used $35
C) <<<SPOKEN FOR>>> Mitutoyo 117-107 .0001 $40
D) <<<SPOKEN FOR>>> Starrett 436 5"-6" no standard $20
E) <<<SPOKEN FOR>>> Mitutoyo caliper, mic combo great condition work well.. Notice the missing button topper for in/mm $50
F) Brown& Sharpe 0-1 with ball attachment $10
G) <<<SPOKEN FOR>>> Starrett 213 1"-2" .0001 $12
H) <<<SPOKEN FOR>>> Mitutoyo 0-1" .0001 Big barrel $18
I) <<<SPOKEN FOR>>> Brown & Sharpe 8 0-1" $5
J) Starrett 230 nice $20(Joe)
L) <<<SPOKEN FOR>>> Mitutoyo 103-135 .0001 unopened , bought in 1997 with reciept. Might need oiling $60 (Joe)



Picture #4
20220420_172717.jpg



A) JTSlocomb Co 11"12" with standard $30
B) Brown & Sharpe 1"-2" $5 (Joe)
C) Brown & Sharpe 3"-4" $12
D) Starrett 436 3"-4" $12
E) Brown & Sharpe #63 1"-2" $12
F) Brown & Sharpe #64 .0001 $18
G)Brown & Sharpe #64 75mm - 100 mm $ 20
H) Craftsman .0001 Germany $15
I) Ammco .300- 1.300 $5
J) Brown & Sharpe #12 $3
L) No Name 15mm $3
M) <<<SPOKEN FOR>>> Starrett 576 0-.5 $25
N) Starrett #2 1"-2" worn $5



Picture #5
20220421_092035.jpg



A) Starrett 445-A2 -3RL very nice $35
B) Nsk 0-6" $20
C) Scheer Tuminco 2.5"- 11.5" IN mic $15
D) Starrett 445 0-6" Nice with a dirty box $50
E) JH Moulet 0-30 indicator $20
F) Starrett 454 11" height gauge 1n/mm $45
G) Starrett 446A 0-2.5" $7.50
H) Starrett 20 6" square nice with owner markings $30 (Joe)
I) Starrett Mech tech with extra tips $25
J) Starrett 448 0-12" vernier depth gauge $40
L) Starrett 823S ID mic $15
M) <<<SPOKEN FOR>>> Starrett 436RL-2 nice 1"-2" $30 (Joe)
N) <<<SPOKEN FOR>>> Starrett 436RL-3 unused 2"-3" $30 (Joe)
O) Scheer Tuminco Dynamometer $5
P) <<<SPOKEN FOR>>> Links .0005 with 7 unopened tips. lightly used if at all. $95
 
Last edited:

Picture #6

20220421_100823.jpg



A) Brown & Sharpe 599-754-28-1 5" $45 for the pair (Joe)
B) Brown & Sharpe 754-e 4" $30 for the pair(Joe)
C) <<<SPOKEN FOR>>> Audell Tool makers book 1942 with box $15 (Joe)
D) Starrett 257 B lie new $35(Joe)
E) #3 MT drift and mt4-mt3, mt3-mt2 sleeves $12 for all(Joe)
F) BB 12" caliper works well no crystal $5(Joe)
G) <<<SPOKEN FOR>>> 4" general clamp pitted $3
H) <<<SPOKEN FOR>>> 2" clamps (1) is labeled Starrett $15 for the pair
I) Machinist Handbook 1968 $20
J) <<<SPOKEN FOR>>> 6 shopmade angle blocks $10 (Joe)
L) <<<SPOKEN FOR>>> 3"X 4 1/2" screw jack need lube $7.50 for all of them(Joe)
M) 5C collet block set $60(Joe)
N) no name thread gauge $2(Joe)
O) <<<SPOKEN FOR>>> Starrett 475 $4(Joe)
P) <<<SPOKEN FOR>>> Starrett 827B edge finder $4(Joe)



Picture #7

20220421_113434.jpg




A) <<<SPOKEN FOR>>> Starrett 659 $75
B) <<<SPOKEN FOR>>> Starrett 657 $55
C,D) Mag base holder $5 (Joe)
E) <<<SPOKEN FOR>>>Mini-mite mag base $15
F) Steward Warner Mechanical Tachometer $70
G) <<<SPOKEN FOR>>> Drill Bushing Jig 11/32, 5/16, 9/32, 1/4, 7/64, F, 5/16, 7/32, #10, 3/16, $20, 5/32 $65
H) Small taps $5 (Joe)
I) Large taps $10 (Joe)
J) Small taps $5 (Joe)
L) Punches $7.50 (Joe)
M) Indicator holder rods $5
N) <<<SPOKEN FOR>>> Snugs $30
O) <<<SPOKEN FOR>>> Indicator holder rods $5
P) <<<SPOKEN FOR>>> Snugs $30


Picture #8
20220421_120602.jpg



A) <<<SPOKEN FOR>>> Gauge block set 9 piece nice $25
B,C) Custom gauge block set $20 each
D) <<<SPOKEN FOR>>> HDT 36 piece gauge block set like new $40
E) <<<SPOKEN FOR>>> Moore tools taper gauges missing .125, .175, .200 $20
F) .945 X 2.22 X 4.67 $30 for the pair
G) <<<SPOKEN FOR>>> 1.34 X 2.48 X 2.99 $30 for the pair
H) .73 X 1.47 X 1.98 $20 for the pair
I) <<<SPOKEN FOR>>> .32 X 1.98 X 4.33 $30 for the pair
J) <<<SPOKEN FOR>>> 1.25 X 1.93 X 2.33 $15
L) <<<SPOKEN FOR>>> .69 X 1.93 X 4.43 $15
M) Ridgid Supreme 1/2 drill chuck with key and MT#2 shank. very clean $20(Joe)
N) Albrecht 1/32 - 1/2" drill chuck with #2 MT $110
O) Albrecht 1/32 - 1/2" drill chuck with #2 MT $95
P) <<<SPOKEN FOR>>> 17 very usable end mills $15


Picture #9
20220421_130222.jpg



A,B,C,D) Your choice $10 each
A1, A2, A3, A4
B1, B2, B3, B6

D1, D2
E,F,G,H,I,J,L) your choice $5 each
E2, E3
F2, F3, F4, F5
G2, G3
H2
I2
J1, J2
L2, L3, L4, L5, L6, L7, L8, L9, L10,L11, L12,
L13, L14, L15, L16, L17, L18, L19, L20, L21



Picture #10
20220421_132149.jpg



A) No name crusty and rusty die head... $25
B) <<<SPOKEN FOR>>> Valcanaire R8 pneumatic spindle ( for engraving?). It was stored poorly. It spun up quietly at 60 PSI . No telling what it sounds like at higher pressures. $75
C) Pneumatic tools Tx-1-B scaler lightly used $100
D) <<<SPOKEN FOR>>> No name no marks planer gauge $25
E) South Bend heavy 10 carriage stop $135
F) Broken lathe carriage stop $10
 
Last edited:
Hi,

I'll take
Photo 2, item D, the 2" Teclock
Photo 6, item O, the Starrett 475 thread gauge
Photo 8, item E, the Moore taper gauges


Tom
 
I'll take:
Picture 4, item M - the $25 #576 half inch mic.
Picture 8, item P - $15 for 17 endmills.
Picture 10, item B - the $75 air spindle.

Also a question on Picture 7, item G (the drill bushings)


Thanks, Pete
 
I'm interested in (2) F and N if fits in 3/8" diameter holder (6) P and C (7) A (8) G and (9) C1 and C2
Let me know what has not been taken in the group I selected.
 
OK, I will take the carriage stop 10e and the 9J that is a thinbit

Steve

I'll add the following, if not taken:
2G) Starrett 196 Works great $12
5A) Starrett 445-A2 -3RL very nice $35
8H) .73 X 1.47 X 1.98 $20 for the pair

Please see my email with questions on toolholders.

Steve
 








 
Back
Top