Dial indicators, Mics, Insert holder, and a little more

[lazz]

This is a revised list...


Almost all of these tools came from 2 places. The first group was last calibrated in the early 1989 to 1992 and the second group was calibrated in 1997 . Needless to say the oil in several of these tools has vanished leaving a residue. A few indicaters stick now and then at first then work just fine afterwards. NONE of them are stuck.



Picture #1 Click here to see more pictures
View attachment 347675



A) Central Machine Bore gauge 2"-6" like new $50
B) Central Machine 201 sticks now and then $15
E) Mitutoyo 2507-08 works fine Needs cleaned $25
F) Ames .0001 works fine Needs cleaned $15
G) Mitutoyo 7300 & 2412 .001- .400 $25
H) Ames .001 Thickness gauge $12
M) Federal D81S $17.50
N) Import .001 - 1" $8
O) Mitutoyo 2416-10 .001 -1" no lock scratched $12
P) Mitutoyo 2416 .001-1" $20 Click for a close up picture.
Q) Ames 3222 .001- 2 coule use a new crystal $15
S) Teclock A1-921 .001- 1" $8 Click for a close up picture.
T) Ames 203 cloudy .001 $5 Click for a close up picture.
X) Hardinge J2-c100-1000 .001- 1" cracked crystal $5
Z) Teclock .001- 1" scratched $5



Picture #2 Click here to see more pictures
View attachment 347676



A) Starrett 711 last word .0005 Like new, It may need fresh oil after sitting for 20 plus years in a garage in Phoenix. $70(Joe)
B) Mitutoyo 513-902 .0005 like new $80 (Joe)
G) <<<SPOKEN FOR>>>Starrett 196 Works great $12
H) Sheffield .0001 Slow return oil might speed things up. $10(Joe)
I) Testmaster .001 great working condition no box $30
L) Brown& Sharpe Best Test .0005 Works great no box $35
M) Federal V81 .001 can stick $5
O) Verdict .00o5 works loose crystal $3
P) Ames .001 works loose crystal $5



Picture #3 Click here to see more pictures
View attachment 347677



J) Starrett 230 nice $20(Joe)



Picture #4 Click here to see more pictures
View attachment 347678



A) JTSlocomb Co 11"12" with standard $30
B) Brown & Sharpe 1"-2" $5 (Joe)
C) Brown & Sharpe 3"-4" $12
D) Starrett 436 3"-4" $12
E) Brown & Sharpe #63 1"-2" $12
F) Brown & Sharpe #64 .0001 $15
G) Brown & Sharpe #64 75mm - 100 mm $15
H) Craftsman .0001 Germany $15
I) Ammco .300- 1.300 $5
J) Brown & Sharpe #12 $3
L) No Name 15mm $3
N) Starrett #2 1"-2" worn $5



Picture #5 Click here to see more pictures
View attachment 347679



A) <<<SPOKEN FOR>>>Starrett 445-A2 -3RL very nice $35
B) Nsk 0-6" $20
D) Starrett 445 0-6" Nice with a dirty box $50
F) Starrett 454 11" height gauge 1n/mm $45
G) Starrett 446A 0-2.5" $7.50
H) Starrett 20 6" square nice with owner markings $30 (Joe)
I) Starrett Mech tech with extra tips $25
J) Starrett 448 0-12" vernier depth gauge $40
L) Starrett 823S ID mic $15


Picture #6 Click here to see more pictures
View attachment 347684



A) Brown & Sharpe 599-754-28-1 5" $45 for the pair (Joe)
B) Brown & Sharpe 754-e 4" $30 for the pair(Joe)
E) #3 MT drift and mt4-mt3, mt3-mt2 sleeves $12 for all(Joe)
F) BB 12" caliper works well no crystal $5(Joe)
I) Machinist Handbook 1968 $20
N) no name thread gauge $2(Joe)



Picture #7 Click here to see more pictures
View attachment 347683




C) Mag base holder $5 (Joe)
F) Steward Warner Mechanical Tachometer $70
H) Small taps $5 (Joe)
I) Large taps $10 (Joe)
J) Small taps $5 (Joe)
L) Punches $7.50 (Joe)


Picture #8 Click here to see more pictures
View attachment 347682



B,C) Custom gauge block set $20 each
F) .945 X 2.22 X 4.67 $30 for the pair
H) <<<SPOKEN FOR>>>.73 X 1.47 X 1.98 $20 for the pair
M) Ridgid Supreme 1/2 drill chuck with key and MT#2 shank. very clean $20(Joe)
N) Albrecht 1/32 - 1/2" drill chuck with #2 MT $110
O) Albrecht 1/32 - 1/2" drill chuck with #2 MT $95


Picture #9 Click here to see more pictures
View attachment 347681



A,B,C,D) Your choice $10 each
A1, A2, A3, A4
B1, B2, B3, B6
D1, D2
E,F,G,H,I,J,L) your choice $5 each
E2, E3
F2, F3, F4, F5
G2, G3
H2
I2
<<<SPOKEN FOR>>>J2
L2, L3, L4, L5, L6, L7, L8, L9, L10,L11, L12,
L13, L14, L15, L16, L17, L18, L19, L20, L21



Picture #10 Click here to see more pictures
View attachment 347680



A) No name crusty and rusty die head... $25
C) Pneumatic tools Tx-1-B scaler lightly used $100
E) South Bend heavy 10 carriage stop $135
F) <<<SPOKEN FOR>>>Broken lathe carriage stop $10

 

[lazz]

A picture is worth a thousand words.

 

[SteveM]

I'll add the following, if not taken:
2G) Starrett 196 Works great $12
5A) Starrett 445-A2 -3RL very nice $35
8H) .73 X 1.47 X 1.98 $20 for the pair

Please see my email with questions on toolholders.

Steve

I'll add the following, if not already spoken for:
9E1, 9E2 and 9E3
9H1 & 9H2

Steve

 

[mikeyjones]

Picture 2: H

Picture 4: C

I'll take those. PM incoming

 

[Froneck]

Please add (5) A starrett depth mic to my pile.

 

[awander]

Got my package the other day-good stuff, nicely packed, shipped quickly.

Thanks!

 

[lazz]

The following is a list of stuff taking space I want to reclaim.
If you can use any of this lets talk.




Picture #1 Click here to see more pictures
View attachment 347675



A) Central Machine Bore gauge 2"-6" like new $50
B) Central Machine 201 sticks now and then $15
E) Mitutoyo 2507-08 works fine Needs cleaned $25
F) Ames .0001 works fine Needs cleaned $15
H) Ames .001 Thickness gauge $12
M) Federal D81S $17.50
N) Import .001 - 1" $8
O) Mitutoyo 2416-10 .001 -1" no lock scratched $12
P) <<<SPOKEN FOR>>> Mitutoyo 2416 .001-1" $20 Click for a close up picture.
Q) Ames 3222 .001- 2 coule use a new crystal $15
S) Teclock A1-921 .001- 1" $8 Click for a close up picture.
T) Ames 203 cloudy .001 $5 Click for a close up picture.
X) Hardinge J2-c100-1000 .001- 1" cracked crystal $5
Z) Teclock .001- 1" scratched $5



Picture #2 Click here to see more pictures
View attachment 347676



A) Starrett 711 last word .0005 Like new, It may need fresh oil after sitting for 20 plus years in a garage in Phoenix. $70(Joe)
B) Mitutoyo 513-902 .0005 like new $80 (Joe)
G) <<<SPOKEN FOR>>>Starrett 196 Works great $12
I) Testmaster .001 great working condition no box $30
M) Federal V81 .001 can stick $5
O) Verdict .00o5 works loose crystal $3
P) Ames .001 works loose crystal $5



Picture #3 Click here to see more pictures
View attachment 347677


F) Brown& Sharpe 0-1 with ball attachment $10
J) <<<SPOKEN FOR>>> Starrett 230 nice $20(Joe)



Picture #4 Click here to see more pictures
View attachment 347678



A) JTSlocomb Co 11"12" with standard $30
B) Brown & Sharpe 1"-2" $5 (Joe)
D) Starrett 436 3"-4" $12
E) Brown & Sharpe #63 1"-2" $12
F) Brown & Sharpe #64 .0001 $15
G) Brown & Sharpe #64 75mm - 100 mm $15
H) Craftsman .0001 Germany $15
I) Ammco .300- 1.300 $5
J) Brown & Sharpe #12 $3
L) No Name 15mm $3
N) Starrett #2 1"-2" worn $5



Picture #5 Click here to see more pictures
View attachment 347679



B) Nsk 0-6" $20
D) Starrett 445 0-6" Nice with a dirty box $50
G) Starrett 446A 0-2.5" $7.50
H) Starrett 20 6" square nice with owner markings $30 (Joe)
I) Starrett Mech tech with extra tips $25
J) Starrett 448 0-12" vernier depth gauge $40
L) <<<SPOKEN FOR>>> Starrett 823S ID mic $15


Picture #6 Click here to see more pictures
View attachment 347684



A) Brown & Sharpe 599-754-28-1 5" $45 for the pair (Joe)
B) Brown & Sharpe 754-e 4" $30 for the pair(Joe)
E) #3 MT drift and mt4-mt3, mt3-mt2 sleeves $12 for all(Joe)
F) BB 12" caliper works well no crystal $5(Joe)
I) <<<SPOKEN FOR>>> Machinist Handbook 1968 $20
N) no name thread gauge $2(Joe)



Picture #7 Click here to see more pictures
View attachment 347683




C) Mag base holder $5 (Joe)
F) Steward Warner Mechanical Tachometer $70
H) Small taps $5 (Joe)
I) Large taps $10 (Joe)
J) Small taps $5 (Joe)


Picture #8 Click here to see more pictures
View attachment 347682



F) .945 X 2.22 X 4.67 $30 for the pair
M) Ridgid Supreme 1/2 drill chuck with key and MT#2 shank. very clean $20(Joe)
N) Albrecht 1/32 - 1/2" drill chuck with #2 MT $110
O) Albrecht 1/32 - 1/2" drill chuck with #2 MT $95


Picture #9 Click here to see more pictures
View attachment 347681



A,B,C,D) Your choice $10 each
A1, A2, A3
B1, B2, B3, B6
D1, D2
E,F,G,H,I,J,L) your choice $5 each
F2, F3, F4, F5
L2, L3, L4, L5, L6, L7, L8, L9, L10,L12,
L13, L14, L15, L16, L17, L18, L19, L20, L21



Picture #10 Click here to see more pictures
View attachment 347680



A) No name crusty and rusty die head... $25
E) South Bend heavy 10 carriage stop $135

 

[animal12]

My package arrived yesterday safely packaged & as advertised
thanks Ron
& thanks again for the repackage
pleasure doing business with you
animal

 

[jkopel]

All my stuff arrived in great shape as usual.
Thanks!

 

[Froneck]

My stuff too has been received well packaged in great condition and are as described.

 

[SteveM]

The post office did their best to ensure that the package was damaged, but they were no match for Lazz.

Everything survived the journey in excellent shape despite the package being more round than cubic (shows the value of strapping tape).

Steve

 

[SVE Performance]

Lazz,
I would like to purchase 4I please send me a total with shipping and I will send payment.
Bill

 

[lazz]

The is not much left if you can use it lets make a deal.
In the link above the pictures are close ups of most if not all.


Picture #1 Click here to see more pictures
View attachment 347675



A) Central Machine Bore gauge 2"-6" like new $50
B) Central Machine 201 sticks now and then $15
E) Mitutoyo 2507-08 works fine Needs cleaned $25
F) Ames .0001 works fine Needs cleaned $15
H) Ames .001 Thickness gauge $12
M) Federal D81S $17.50
N) Import .001 - 1" $8
Q) Ames 3222 .001- 2 coule use a new crystal $15
S) Teclock A1-921 .001- 1" $8 Click for a close up picture.
T) Ames 203 cloudy .001 $5 Click for a close up picture.
X) Hardinge J2-c100-1000 .001- 1" cracked crystal $5
Z) Teclock .001- 1" scratched $5



Picture #2 Click here to see more pictures
View attachment 347676



A) Starrett 711 last word .0005 Like new, It may need fresh oil after sitting for 20 plus years in a garage in Phoenix. $70(Joe)
B) Mitutoyo 513-902 .0005 like new $80 (Joe)
M) Federal V81 .001 can stick $5
O) Verdict .00o5 works loose crystal $3
P) Ames .001 works loose crystal $5



Picture #3 Click here to see more pictures
View attachment 347677


F) Brown& Sharpe 0-1 with ball attachment $10



Picture #4 Click here to see more pictures
View attachment 347678



A) JTSlocomb Co 11"12" with standard $30
B) Brown & Sharpe 1"-2" $5 (Joe)
D) Starrett 436 3"-4" $12
E) Brown & Sharpe #63 1"-2" $12
F) Brown & Sharpe #64 .0001 $15
G) Brown & Sharpe #64 75mm - 100 mm $15
H) Craftsman .0001 Germany $15
L) No Name 15mm $3



Picture #5 Click here to see more pictures
View attachment 347679



B) Nsk 0-6" $20
D) Starrett 445 0-6" Nice with a dirty box $50
H) Starrett 20 6" square nice with owner markings $30 (Joe)
I) Starrett Mech tech with extra tips $25
J) Starrett 448 0-12" vernier depth gauge $40


Picture #6 Click here to see more pictures
View attachment 347684



A) Brown & Sharpe 599-754-28-1 5" $45 for the pair (Joe)
E) #3 MT drift and mt4-mt3, mt3-mt2 sleeves $12 for all(Joe)
F) BB 12" caliper works well no crystal $5(Joe)
N) no name thread gauge $2(Joe)



Picture #7 Click here to see more pictures
View attachment 347683




C) Mag base holder $5 (Joe)
F) Steward Warner Mechanical Tachometer $70
H) Small taps $5 (Joe)
I) Large taps $10 (Joe)
J) Small taps $5 (Joe)


Picture #8 Click here to see more pictures
View attachment 347682



F) .945 X 2.22 X 4.67 $30 for the pair
N) Albrecht 1/32 - 1/2" drill chuck with #2 MT $110
O) Albrecht 1/32 - 1/2" drill chuck with #2 MT $95


Picture #9 Click here to see more pictures
View attachment 347681



C,D) Your choice $10 each

B1, B2, B3, B6

E,F,G,H,I,J,L) your choice $5 each
F2, F3, F4, F5
L2, L3, L5, L6, L7, L8, L10,L12,
L13, L15, L16, L19, L20, L21



Picture #10 Click here to see more pictures
View attachment 347680



A) No name crusty and rusty die head... $25
E) South Bend heavy 10 carriage stop $135

 

[meangene56]

Federal D81S $17.50 still available? condition and how do we proceed?

 

[lazz]

Federal D81S $17.50 still available? condition and how do we proceed?

Picture #1 item M is no longer available.
That indicator and any others on the list sold on February 11th 2023 at a local machinist swap meet.

It was pure luck I noticed your request.
In the future the best way to proceed is to send a PM or start a conversation. That way the seller gets notified.


I do happen to have a Starrett 25-441 .001 to 1" for $30
Shipping would make the total $39.
If you are interested, sending me a PM or conversation is the way to go. Should you be looking for other goodies you can send me a list and I'll see what I have.... Combining shipping makes for the best deals.

To start a conversation mouse over the name to the left and bottom right of the popup, is start a conversation.