ER Collet Chucks for workholding

[70olds]

Does anyone know of any standard brands that carry something like these "collet chucks" from Amazon?
I would like to find something ER40 that is low prolife flange mount like this to mount to a 4th axis rotary. Bonus points if anyone has a 1" hydraulic holder built the same way. Using a toolholder from a mill is not an option, I don't have the projection length to give up. Thanks.

https://www.amazon.com/HHIP-3901-5036-Collet-Diameter-Height/dp/B01LW772DK/ref=sr_1_19?keywords=er40%2Bcollet%2Bblock&qid=1681309689&s=hi&sprefix=er%2B40%2B%2Ctools%2C60&sr=1-19&th=1

 

[kinetiq]

Jergens has a line:
https://www.jergensinc.com/en/product/5axis-er-collet-fixtures?c=35543

 

[kinetiq]

ER40 is toolholding usually so there's not many options for stationary brand name chucks. Lots of stuff for 5C/16C/etc.

These guys (http://www.ecolletchucks.com/) made a nice little comparison chart:

 

[70olds]

Jergens has a line:
https://www.jergensinc.com/en/product/5axis-er-collet-fixtures?c=35543

Thank you. Jergen's actually has the perfect piece for what I need too. ER40 and already on a 52MM quick change pallet with a low "gage length". (I have a Lang plate on my rotary, I was going to make an adapter plate). For the price I'd prefer to find the generic pieces and build my own however so that I can run multiple different ones and only spend 800 bucks on 4 of them instead of 1.

 

[70olds]

ER40 is toolholding usually so there's not many options for stationary brand name chucks. Lots of stuff for 5C/16C/etc.

These guys (http://www.ecolletchucks.com/) made a nice little comparison chart:

View attachment 393189

I know, but there are a few that offer them. Being ER keeps it so I don't have to purchase any additional collets (not that I don't have 5C, 16C etc.) and it's also a very short protrusion from the mounting surface. I have a low profile 5C manual chuck but even that is 4.5-5" tall.

 

[crossthread82]

I have one of these floating around. Not flange mounted but I suppose could be modified.
https://5thaxis.com/product/r96-cerx-40/