Fadal 2 tone blue stripes

[garychipmaker]

Hi Is there anyone that sells the blue striped decals. Or I have found some vinyl stripe material. But I don't know how wide the stripes are and the distance between each stripe Thanks. I know there is a Fadal section now but I thought this would get a quicker response.

 

[garychipmaker]

Bumping this back to the top. Maybe get a mid-day response

 

[in2glamisgirl]

The early machines the stripes were painted on.
Might consider some fine line tape and paint for a one-off restoration.

 

[Cole2534]

I'd ask in the Fadal group on Facebook, if you have it.

 

[garychipmaker]

Thanks Cole I got an answer back on FB. They are 6.5 wide with 1.5" gap between

 

[RC Mech]

Thanks Cole I got an answer back on FB. They are 6.5 wide with 1.5" gap between

This is correct. Good luck if you have that awful hammer-tone powder coating they used on the 00’s enclosures.

ITS CNC has the vertical red Fadal decal, check the website if they have the blue stripes. ‘Murica.

 

[garychipmaker]

Mines a 1998

 

[EndlessWaltz]

I would hot rod it...