For Sale: Tool Holders - Lyndex Nikken, HPI, Parlec, etc. - CAT40 & HSK63A

[NLan07]

Hey everyone,

Up for sale I have a LOT of tool holders, both CAT40 and HSK-63A. Most of these holders are Lyndex Nikken brand, but there are a bunch from Parlec and some from HPI as well. All tool holders will be cleaned via ultrasonic cleaner prior to shipment. Please note: The holders shown in these pictures have not been ultrasonic cleaned yet, so the product you receive will be in even better cosmetic condition once it arrives.

The prices listed below are for (1) holder each. I'm happy to give discounts if you want five, ten, or more tool holders though. Whether you want one, or dozens, just send me a PM and let me know what you'd like.





CAT40:
Milling Chuck: Lyndex Nikken - CAT40-C1-85U --- Qty (22) + (2) in the 1.25" Dia Size
- MSRP on these holders new is $523.00 on the Lyndex website. My asking price is only $245. (53% off)
- I also have a ton of collets for these milling chucks ranging from 3/8" - 3/4" (mostly 1/2") I could include as well.

Milling Chuck: https://www.lyndexnikken.com/tool-h...-flange-cat40-milling-chucks-cat40-c1-85u-idu




SK-16 Collet Holder: Lyndex Nikken - CAT40-SK16-60U --- Qty (25)
- Each holder comes with the following extras from Lyndex Nikken not normally included with the tool holder itself:
1. (x1) High balance collet nut (SKN-16BJ(GH)) instead of the standard one.
2. (x1) 12mm diameter Coolant Sealing Ring (SKJ16-12).
3. (x1) 12mm SK-16 Collet as well.
I have about (25) of these holder + extras combos. Total MSRP for all of those items together $437+$78+$33+$77 = $625.00 total. My asking price is only $295. (53% off)

Tool Holder: https://www.lyndexnikken.com/tool-h...t40-sk-slim-chuck-holders-cat40-sk16-60up-idu
High Balance Coolant Nut: https://www.lyndexnikken.com/tool-h...s---parts-slim-chuck-holders-nuts-skn-16bj-gh
Coolant Sealing Ring: https://www.lyndexnikken.com/collet...nt-caps-sk13-sk16-metric-jet-slotted-skj16-12
SK16 Collet: https://www.lyndexnikken.com/collets-slim-chuck-sk-collets-sk16-collets-metric-sk16-12





Mini Chuck: Info on holder says HPI, but I'm pretty sure they're Pioneer now. CT40-MX8-85 --- Qty (6)
- MSRP on these holders (from Pioneer) is $367.90. My price is $165. (55% off)

These holders have the benefits of heat shrink for a super small holder nose, but use a collet that pulls the tool in from the back. Fantastic option if you want the reach of heat shrink without the spendy heat shrink machine.
https://pioneerna.com/access/holders/details.php?id=CAT40-MX08-085

 

[NLan07]

ER-16 Collet Holder: Parlec - C40-16ER5 --- Qty (150-ish)
- Most of the Collet Nuts on these holders have a bearing ring in the face for added grip/lower runout. There's a mix of brands (Redline, Command, Parlec, and a lot unknown), so if you have a preference on what kind/brand of nut you'd prefer let me know and I'll make sure to include them. For some reason the previous owners of these holders lightly scribed a 7-8 digit number on the shaft of each one of these, so almost all of them have cosmetic defects but are 100% functional. Asking price for these is $48 each.

 

[NLan07]

HSK-63A Tool Holders:

Milling Chuck: Lyndex Nikken - HSK63A-C1-100 --- Qty (14) + (2) in the 1.25" Dia Size
- MSRP on these holders new is $556.00 on the Lyndex website. My asking price is only $275. (50% off)
- I also have a ton of collets for these milling chucks ranging from 3/8" - 3/4" (mostly 1/2") I could include as well.

HSK63A-C1-100

HSK63A 1" Milling Chuck 8,000rpm

www.lyndexnikken.com

Mini-Mini Chuck: Lyndex Nikken - HSK63A-MMC8C-107-D --- Qty (15)
- MSRP on these holders new is $494.00 on the Lyndex website. My asking price is only $225. (55% off)

HSK63A-MMC8C-107-D

HSK63A 10mm Mini-Mini Chuck Coolant Draw Type 30,000rpm G2.5

www.lyndexnikken.com

Shell Mill Holder: Various Brands --- Qty (5)
- These shell mill holders have a 3/4" Pilot and 5.0" Gauge Length. Asking price is $125

 

[NLan07]

I also have a TON of CAT40 end mill holders in various sizes (most are 1/2" and above). Most are Parlec, but there's a couple from Command as well. So if there's any side-lock holder sizes you're looking for let me know, and I'll see what I have. Make me an offer for the size(s) you want.

 

[NLan07]

Bump.

 

[NLan07]

I forgot to add, you can text me at (208) 7zero9- 4two16 or email me at

Spoiler: contact email

[email protected]

for more info or pictures. I would add this to my original post but the forum isn't letting me edit right now.

 

[Garwood]

Great pictures and good descriptions! Maybe I missed the location?

Curious, have you ever purchased used toolholders or paid attention to what nice ones sell for at auctions and Ebay?

 

[NLan07]

Great pictures and good descriptions! Maybe I missed the location?

Curious, have you ever purchased used toolholders or paid attention to what nice ones sell for at auctions and Ebay?

Thanks! I'm located in Idaho.

I've looked at some on Ebay but the ones I saw were either pretty beat up and low priced, or almost new priced. Am I off on my asking price?

 

[Garwood]

Thanks! I'm located in Idaho.

I've looked at some on Ebay but the ones I saw were either pretty beat up and low priced, or almost new priced. Am I off on my asking price?

Ebay sold listings will give you a good idea.

 

[NLan07]

Bump. Prices dropped to $189 ea for the CAT40 Milling Chucks, 219 for the CAT40 SK-16 Holder packages, 39 for the Parlec ER-16 holders, 195 for the HSK-63A Milling chucks, and 180 for the HSK-63A Mini Chucks. I would edit my original post but that option has completely disappeared for some reason?

I really need to get this stuff sold, so I'm also willing to take offers, so if you guys are interested in anything let me know and/or make an offer. Thanks!

 

[NLan07]

All of the Parlec ER-16 Collet Tool Holders have SOLD!!

 

[NLan07]

(1) CAT40 Milling Chuck & (1) SK-16 Collet Holder have SOLD!

 

[NLan07]

(1) HSK63A Milling Chuck sold!

 

[NLan07]

Multiple Milling Chucks, CAT40 & HSK-63A, sold!

 

[NLan07]

Bump. Make me an offer!