cnctoolcat
Diamond
- Joined
- Sep 18, 2006
- Location
- Abingdon, VA
I have a 2004 Mazak QTN 350, and a 2007 QTN 350-II for sale. These machines came with a shop I purchased a couple of years ago, and are now surplus to our needs.
They are located 1/2 mile of Exit 14 of Interstate 81 in Abingdon, VA.
These are not your typical ragged-out, worn-out, beat-up machines. They are ready for production. They have only been ran one shift, and even at that during their lives here they have set for weeks/months at a time without running.
Theses Mazaks are in excellent condition — whisper quiet spindles, axis motions, and turrets. My dad ran the shop for 15 years, and he was very picky about keeping the machines in good shape. Only Mazak technicians have wrenched on these machines.
I do have these machines priced to sell, both about $10k cheaper than you would usually see in the marketplace. They are located in a rented space, and we need them gone.
Actually, Mazaks of this size and condition are rarely seen for sale!
1.) 2007 QTN 350-II
Specs on this larger machine are:
16” swing x 65” Z travel
Mazatrol Matrix control
40hp, 4” bar capacity spindle
12” Kitagawa big-bore chuck
12 station servo-indexed turret w/7 ID tooling blocks
Servo/ballscrew driven tailstock
High pressure coolant
Chip conveyor
Weight: 16,000 pounds
Included with machine: chip hopper, dozens of soft jaws, spindle liners, skid of tooling and spare parts
PRICE: $65,000
———————————————————
2.) 2004 Mazak QT Nexus 350
Specs on the smaller machine are:
16” swing x 48” Z travel
Mazatrol 640T control
40hp, 4” bar capacity spindle
12” Kitagawa big-bore chuck
12 station servo-indexed turret w/7 ID tooling blocks
Servo/ballscrew driven tailstock
High pressure coolant
Chip conveyor
New Z-axis sliding covers
Weight: 14,500 pounds
Also Included with this machine: chip hopper, dozens of soft jaws, spindle liners, skid of tooling and spare parts.
PRICE : $45,000
——————————————————-
At these prices, loading is not included. We can help with attaining a rigger, and will have the machines disconnected and prepped for shipment.
Please send me a private message here on PM if interested. I have many more pictures available.
The machines are still under power, and can be demonstrated (in person or via video) by appointment.
Thank you for looking, and spread the word![emoji6]
ToolCat Greg
They are located 1/2 mile of Exit 14 of Interstate 81 in Abingdon, VA.
These are not your typical ragged-out, worn-out, beat-up machines. They are ready for production. They have only been ran one shift, and even at that during their lives here they have set for weeks/months at a time without running.
Theses Mazaks are in excellent condition — whisper quiet spindles, axis motions, and turrets. My dad ran the shop for 15 years, and he was very picky about keeping the machines in good shape. Only Mazak technicians have wrenched on these machines.
I do have these machines priced to sell, both about $10k cheaper than you would usually see in the marketplace. They are located in a rented space, and we need them gone.
Actually, Mazaks of this size and condition are rarely seen for sale!
1.) 2007 QTN 350-II
Specs on this larger machine are:
16” swing x 65” Z travel
Mazatrol Matrix control
40hp, 4” bar capacity spindle
12” Kitagawa big-bore chuck
12 station servo-indexed turret w/7 ID tooling blocks
Servo/ballscrew driven tailstock
High pressure coolant
Chip conveyor
Weight: 16,000 pounds
Included with machine: chip hopper, dozens of soft jaws, spindle liners, skid of tooling and spare parts
PRICE: $65,000
———————————————————
2.) 2004 Mazak QT Nexus 350
Specs on the smaller machine are:
16” swing x 48” Z travel
Mazatrol 640T control
40hp, 4” bar capacity spindle
12” Kitagawa big-bore chuck
12 station servo-indexed turret w/7 ID tooling blocks
Servo/ballscrew driven tailstock
High pressure coolant
Chip conveyor
New Z-axis sliding covers
Weight: 14,500 pounds
Also Included with this machine: chip hopper, dozens of soft jaws, spindle liners, skid of tooling and spare parts.
PRICE : $45,000
——————————————————-
At these prices, loading is not included. We can help with attaining a rigger, and will have the machines disconnected and prepped for shipment.
Please send me a private message here on PM if interested. I have many more pictures available.
The machines are still under power, and can be demonstrated (in person or via video) by appointment.
Thank you for looking, and spread the word![emoji6]
ToolCat Greg