What's new
What's new

For Sale ! ! !

newtonsapple

Cast Iron
Joined
May 16, 2017
While we are letting German cats out of bags.... this Deckel sold for $500 at Bidspotter auction yesterday.... but today is a bit more...

Deckel FP4NC CNC Vertical Machining Center [1988] w/ CAT 40 Tool Holders | eBay

Deckel FP4NC CNC Vertical Machining Center, Universal Head, Dialog 11 Control, Cat 40, s/n 21477,

Looks like it is the auction house selling it on Ebay. $500 didn't meet the reserve I guess?

An important part of the auction description is missing from the Ebay listing: "Deckel FP4NC CNC Vertical Machining Center, Universal Head, Dialog 11 Control, Cat 40, s/n 21477, New 1988 *Needs Repair*"
 

rimcanyon

Diamond
Joined
Sep 28, 2002
Location
Salinas, CA USA
Saw that on Bidspotter, and thought meh. Those old Deckels don't interest me anymore. Cost of rigging , transport and storage, would rule it out.

And the cost of Dialog 11 board repairs... And double the shipping/rigging for those of us on the left coast.
 

Milacron

Super Moderator
Joined
Dec 15, 2000
Location
SC, USA
Saw that on Bidspotter, and thought meh. Those old Deckels don't interest me anymore. Cost of rigging , transport and storage, would rule it out.
They did mention it needs repair in the audio of the auction....but I see in one photo the control is not fully booting up...if that's all it is I could probably fix that easily .... but lord knows what else might be wrong with it... A major 'meh' to me too... I've owned at least 6 Dialog 11 machines and found them too much trouble to deal with. Nevermore....
 

Milacron

Super Moderator
Joined
Dec 15, 2000
Location
SC, USA
For those that might have missed the drawn out final bidding on the last generation Deckel FP3 (foundry in TN) yesterday... it went for $13,920 (incl BP) Reasonable considering it's rarity...if condition is good. If not in a foundry (nasty dirt) and had at least the DRO scales I would have been hot on it.

As to the NC models...

IMG_9059.jpgIMG_9062.jpg IMG_9067.jpg

The flip head model might have ended a little higher than shown...I vaguely remember some strange person bidding with 3 seconds to go...
 

Spud

Diamond
Joined
Jan 12, 2006
Location
Brookfield, Wisconsin
For those that might have missed the drawn out final bidding on the last generation Deckel FP3 (foundry in TN) yesterday... it went for $13,920 (incl BP) Reasonable considering it's rarity...if condition is good. If not in a foundry (nasty dirt) and had at least the DRO scales I would have been hot on it.

As to the NC models...

View attachment 325068View attachment 325069 View attachment 325070

The flip head model might have ended a little higher than shown...I vaguely remember some strange person bidding with 3 seconds to go...


Yeah I was following that yesterday. Surprised the FP3 went that high; I thought it would go for around $5500. Guess I am not versed on the market value.

Makes me regret not getting that FP4MK in Canada a few months ago that went for $2,000 canadian. The rigging cost of $500 turned me off. Shipping was reasonable at $950



Was also watching that Oerlikon lathe, that went for $5,500 (not including BP and Sales tax)


 

ol'trusty

Plastic
Joined
May 18, 2011
Location
Israel
HI
I have a bunch of RENISHAW probes
Maybe someone in this forum needs one
I do not know how I can check them
I have them listed on EBAY
Feel free to contact me
MP3 MP10 MP12 40 HAAS 20210728_183606.jpg
 

bsg

Titanium
Joined
Jan 17, 2003
Location
Imlay City, Michigan
For those that might have missed the drawn out final bidding on the last generation Deckel FP3 (foundry in TN) yesterday... it went for $13,920 (incl BP) Reasonable considering it's rarity...if condition is good. If not in a foundry (nasty dirt) and had at least the DRO scales I would have been hot on it.

As to the NC models...

View attachment 325068View attachment 325069 View attachment 325070

The flip head model might have ended a little higher than shown...I vaguely remember some strange person bidding with 3 seconds to go...

It was in a aluminum foundry.......I was a little leery of this machine, they had two in the picture and sold this one?

Overall the place wasn't as filthy as I expected, but it wasn't an immaculate toolroom/lab environment......

Kevin
 

Milacron

Super Moderator
Joined
Dec 15, 2000
Location
SC, USA
It was in a aluminum foundry.......I was a little leery of this machine, they had two in the picture and sold this one?

Overall the place wasn't as filthy as I expected, but it wasn't an immaculate toolroom/lab environment......

Kevin
In my experience aluminum foundries are as dirty if not more so than iron foundries. Guess it depends on the foundry housekeeping somewhat... the Makino KE 55 mill looked reasonably clean at least.
 

jtinkerer

Plastic
Joined
Aug 30, 2011
Location
Wisconsin
Deckel FP4 NC For Sale

I have a 1986 Deckel FP4NC. It is located in Southern Minnesota. Still runs and is in good shape. I am not needing it anymore and would take offers if there is any interest. Any advice on how/where to list it for sale would be appreciated as well.
 

Doozer

Titanium
Joined
Jul 23, 2001
Location
Buffalo NY
Charlotte NC.
For sale... Deckel FP1, Lever shift machine,
has forklift damage on crank handles, could be fixed
or for parts. I don't think the X screw is bent, which
is good. Spindle is 4MT and Z axis is perfect. Only X and
knee handles are broken. Have some accessories, was going
to price them separately. I have no ideal what this fixer
upper/parts machine is worth. Email me if interested.
[email protected]

--Doozer
 

dgcope

Cast Iron
Joined
Feb 7, 2003
Location
Athens GA USA
Deckel 6017 Rotary table (380mm) in fine condition. A couple misses on the top but otherwise very good. It has just been carefully cleaned and the spring plunger stem repaired (a common problem). $850 plus shipping. Includes plywood handling skid. See my ad in the PM classifieds for photos. Location: Georgia USA. Many thanks!
 

ballen

Titanium
Joined
Sep 25, 2011
Location
Garbsen, Germany
Deckel SK40 S20x2 centering microscope for sale.


Magnification x30, capable of centering to about 2 microns = 0.0001". This is the later model with the swiveling eyepiece.

I got this with some other tools, and have checked, cleaned and adjusted it. Works perfectly.

Included are the standard accessories: spare bulbs, edgefinder, bulb removal tool (clear tubing), and fitted box.

Price is 650 Euros plus shipping. Insured shipping to the USA costs about 60 Euros, Europe will be somewhat less, Australia somewhat more.

Please send me a PM if you are interested, or it goes onto Ebay. A number of people on this forum have purchased things from me in the past and can vouch for me.


Cheers,
Bruce


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php
 

Jersey John

Stainless
Joined
May 29, 2015
Location
Beccles / Suffolk, United Kingdom
Deckel FP2 / FP3 / FP3L Coolant Pump for sale.

Hi folk ... Running down my tooling/machine spares.

Bought from Franz Singer (German Deckel Specialist) but never fitted!

ebay-deckel-pump01.jpg

This is a totally NEWLY recondition pump costing me Euro 480.00

Open to offers and will ship worldwide.

Thanks

John
 

adh2000

Titanium
Joined
Dec 21, 2005
Location
Waukesha, WI
FS: Maho mill table. I believe this is for an MH600 manual mill from the 1960s. It is the tilting swiveling table but it is only the table top. I do not have the tilting bracket that goes on the machine and supports the table. Located in Woodland Hills CA. $150
1678e3bd662dfbc6a4b6220428d593c7.jpg

25fc6a509f9177d072266bfdcc024b66.jpg
62d572a7af845d6f1f5e46fca991532f.jpg



Sent from my iPhone using Tapatalk
 








 
Top