FS (2) unknown roller steadies

[Cole2534]

First one is 9-1/2" from center to flat way, center of flat to center of 90deg vee is 7-1/4". Looks to be about 4" round capacity. Doesn't have bed clamp.

Second one is 7-1/2" from center to flat way, center of flat to center of 90deg vee is 6". Looks to be about 6" capacity. Has bed clamp.

Let's start at $250/ea, buyer pays shipping. OBO.

Programmed via Mazatrol

 

[M.B. Naegle]

I'm interested in the second, 6" capacity steady. PM inbound.

 

[bsg]

PM sent....

Kevin

 

[4GSR]

PM sent on the first steady rest.

 

[Cole2534]

Both steadies are tentatively spoken for, will advise when things change.

Programmed via Mazatrol

 

[Cole2534]

All deals fell through, these are back available.

In the meantime, I found the bed clamp and a riser block for the smaller diameter unit.

Programmed via Mazatrol

 

[bsg]

All deals fell through, these are back available.

Programmed via Mazatrol

BTW, these are Leblond Regal steady rests, the first one should be for a 19" machine and the second 15" machine........

Good luck with your sale!

Kevin

 

[Kirt]

PM sent on the steady for 15" lathe.

 

[Cole2534]

PM sent on the steady for 15" lathe.

Kirt, if you see this empty your PM's!

Also, the larger swing/smaller diameter rest is still available.

 

[Kirt]

Kirt, if you see this empty your PM's!

Sorry about that - done.

 

[gbent]

What height/width does the riser give that steady?

 

[Cole2534]

What height/width does the riser give that steady?

I think it's a 2" lift, but I'll have to verify tomorrow.

 

[Cole2534]

It's a 3" lift, just confirmed. That should give 12-1/2" to center from the flat way.

 

[Cole2534]

15" swing steady is sold.

Larger unit is still available! Shipping will probably run $75-$100 dollars.

Programmed via Mazatrol

 

[Kirt]

15" swing steady is sold.

Cole,

Steady arrived today in fine condition - fabulous packing job. Very happy with it. Thank you.

Kirt