JLMrebuilds
Plastic
- Joined
- Dec 27, 2021
This is a NOS Baileigh BB-12014H hyd sheetmetal brake. It got weathered setting on trailer outside while shops was getting moved and never was needed in new shop. Only wired up to bend few test bends to test its condition. All hoses,wiring, hyd are in perfect condition. Paint and bare metal parts just weathered. Works same as new. if interested call me 765-499-1875. I can send pics but i can't figure out how to post them here. I will ship if needed.
Located in Indiana. Asking $10500.00 but would take Partial trade.
Specs from web site:
hydraulic box and pan brake with adjustable angle auto-stop bending and more power. A welded steel frame ensures accuracy and prevents twisting.
Maximum capacity of 14 gauge mild steel or 18 gauge stainless steel.
10-foot (120”) working width.
Maximum bend angle of 135°.
Runs on 220-volt 3-phase power.
Industrial-grade hydraulic system cuts down on operator effort for productinterestedn runs, making your shop more efficient and saving you money.
Simple to operate with adjustable angle auto-stop:
Dial in the desired bend degree (including springback).
Load the machine.
Begin the cycle by stepping on the foot pedal controls.
Machine clamps the material, and the leaf will lift to the desired angle and return.
Upper beam unclamps the material, ready for the next bend.
You can operate the machine from the control panel or with the included foot pedal.
Includes 26 hardened fingers of various sizes (6 fingers of 3", 4 of 4", 10 of 5", 6 of 6").
Fully-welded steel frame and support rods add rigidity to the overall structure to provide years of trouble-free use.
Baileigh covers this hydraulic sheet metal brake with a 1-year parts warranty.
We carry most replacement parts in stock for fast shipping.
Comes with lifetime technical support by phone. Call up our experienced team of reps for troubleshooting and application tips.
Located in Indiana. Asking $10500.00 but would take Partial trade.
Specs from web site:
hydraulic box and pan brake with adjustable angle auto-stop bending and more power. A welded steel frame ensures accuracy and prevents twisting.
Maximum capacity of 14 gauge mild steel or 18 gauge stainless steel.
10-foot (120”) working width.
Maximum bend angle of 135°.
Runs on 220-volt 3-phase power.
Industrial-grade hydraulic system cuts down on operator effort for productinterestedn runs, making your shop more efficient and saving you money.
Simple to operate with adjustable angle auto-stop:
Dial in the desired bend degree (including springback).
Load the machine.
Begin the cycle by stepping on the foot pedal controls.
Machine clamps the material, and the leaf will lift to the desired angle and return.
Upper beam unclamps the material, ready for the next bend.
You can operate the machine from the control panel or with the included foot pedal.
Includes 26 hardened fingers of various sizes (6 fingers of 3", 4 of 4", 10 of 5", 6 of 6").
Fully-welded steel frame and support rods add rigidity to the overall structure to provide years of trouble-free use.
Baileigh covers this hydraulic sheet metal brake with a 1-year parts warranty.
We carry most replacement parts in stock for fast shipping.
Comes with lifetime technical support by phone. Call up our experienced team of reps for troubleshooting and application tips.