snowman
Diamond
- Joined
- Jul 31, 2004
- Location
- Southeast Michigan
Etalon 0.4 - 0.8 bore mics. These feel tight, and not a good tight. My guess is that they need oil. I can unscrew them very easily if I slide the thimble forward and take any pressure off the screw. If it's back, it feels like they bind a bit. $300 for the set with two setting rings and the extension. Last set sold on Ebay for $600. Shipping will be whatever a medium flat rate costs these days.
Moore and Wright bore gauges. These are similar to a telescoping gauge or a ball gauge. The screw expands two ball bearings allowing you to transfer the bore measurement to your micrometers. $110 shipped via small flate rate. These still seem to have the original crusty oil grease on them.
Pictures may take a sec.
Moore and Wright bore gauges. These are similar to a telescoping gauge or a ball gauge. The screw expands two ball bearings allowing you to transfer the bore measurement to your micrometers. $110 shipped via small flate rate. These still seem to have the original crusty oil grease on them.
Pictures may take a sec.