AlexBanich
Stainless
- Joined
- Jan 31, 2008
- Location
- Clearfield, PA
Here are the tools that I have for sale:
Starrettish (I think they are but can't prove it) edge finders one is 1/2" end and 3/16 end and other is just 3/16 end with 3/8 shank - $7/pc
precision vise $40 - has a little big of surface rust on it that needs cleaned up 7 ¼ x 2 7/8 max work opening 3 ¾
right angle blocks - $25 both $15/pc 5 1/8 x 3 7/8 bases are 4x4 these need cleaned up as the surface rust is more than just bothersome. Not that these are too far gone just need cleaned (will add pictures later)
starrett little v-block 1 1/4 x 1 1/4 - $15
diamond dressers there are 5 of them and they are variable sizes but it looks like there is still some diamond on 4 but it looks like the user never rotated them so they are flat. There is one that looks like brand new- $15 for all
Starrett pin vise black handled - $6
no name pin vise looks like all aluminum starrett but can't make out the name says new york about 4" long like the starrett - $6
These are are in little like cardboard endmill containers but are labeled MORSE CUTTING TOOLS QUANTY 12 then say either Hardened & Ground Blanks Minus Series or they say Straight Shank Jobbers Length Drills. Most have a date of 1968 and .0003 and are about 2" in length $20 for all
size 78 22x blanks
size 64 2x look like halfs blanks
size 55 8x blanks
size 74 blank 1x half
size 78 12x drill bits with 1 blank unknown
size 64 1x drill bit 3 unknown blanks
size 65 4x drill bits
6x32 thread gauge -$7
10x32 thread gauge - $7
1/4x20 thread gauge - $7
Electrical Cords/stuff
rj45 to rs232 and other adapters like ps/2 to rs232 connector- $4/pc
rs232/serial/ethernet cords mostly 6" 8" do have some 4" - $0.75/pc
keyboards and mice M/O
I have a cisco firewall that like a router you just plug in - $20
I have a small computer switch $20
DVI and SCSI - $2/pc
DSU/CSU (for use with t1 internet lines) x2 - $30/pc or $50 for both come with cords
Phone cord - $0.50/pc most of this is long stuff
Computer power cords - $1/pc
I know that this listing really isn't that great especially without pictures (the precision vise and right angle blocks especially) but I got the flu so no flaming me for it. As always most of this stuff is just needs to be gone, so if you think the prices are high or whatever make me an offer. The computer stuff came out of a sewing factory office therefore its mostly for the big copiers and such. I got what I wanted out of it so the rest is yours. Figured for the bigger shops or the smaller shops starting to get bigger this would be a deal considering you can't find any single one of those cords new for less than $10. One thing I will say is that if you plan on your bill being under $5 don't expect next day shipping. I would hope you all understand with the price of gas and me being sick its just not an option. As well I am open to trades but like I said this stuff is mostly to get out of my way so I don't need something else taking its place, but you never know. Ok if any questions please email me [email protected] Its the best way to get a hold of me.
Starrettish (I think they are but can't prove it) edge finders one is 1/2" end and 3/16 end and other is just 3/16 end with 3/8 shank - $7/pc
precision vise $40 - has a little big of surface rust on it that needs cleaned up 7 ¼ x 2 7/8 max work opening 3 ¾
right angle blocks - $25 both $15/pc 5 1/8 x 3 7/8 bases are 4x4 these need cleaned up as the surface rust is more than just bothersome. Not that these are too far gone just need cleaned (will add pictures later)
starrett little v-block 1 1/4 x 1 1/4 - $15
diamond dressers there are 5 of them and they are variable sizes but it looks like there is still some diamond on 4 but it looks like the user never rotated them so they are flat. There is one that looks like brand new- $15 for all
Starrett pin vise black handled - $6
no name pin vise looks like all aluminum starrett but can't make out the name says new york about 4" long like the starrett - $6
These are are in little like cardboard endmill containers but are labeled MORSE CUTTING TOOLS QUANTY 12 then say either Hardened & Ground Blanks Minus Series or they say Straight Shank Jobbers Length Drills. Most have a date of 1968 and .0003 and are about 2" in length $20 for all
size 78 22x blanks
size 64 2x look like halfs blanks
size 55 8x blanks
size 74 blank 1x half
size 78 12x drill bits with 1 blank unknown
size 64 1x drill bit 3 unknown blanks
size 65 4x drill bits
6x32 thread gauge -$7
10x32 thread gauge - $7
1/4x20 thread gauge - $7
Electrical Cords/stuff
rj45 to rs232 and other adapters like ps/2 to rs232 connector- $4/pc
rs232/serial/ethernet cords mostly 6" 8" do have some 4" - $0.75/pc
keyboards and mice M/O
I have a cisco firewall that like a router you just plug in - $20
I have a small computer switch $20
DVI and SCSI - $2/pc
DSU/CSU (for use with t1 internet lines) x2 - $30/pc or $50 for both come with cords
Phone cord - $0.50/pc most of this is long stuff
Computer power cords - $1/pc
I know that this listing really isn't that great especially without pictures (the precision vise and right angle blocks especially) but I got the flu so no flaming me for it. As always most of this stuff is just needs to be gone, so if you think the prices are high or whatever make me an offer. The computer stuff came out of a sewing factory office therefore its mostly for the big copiers and such. I got what I wanted out of it so the rest is yours. Figured for the bigger shops or the smaller shops starting to get bigger this would be a deal considering you can't find any single one of those cords new for less than $10. One thing I will say is that if you plan on your bill being under $5 don't expect next day shipping. I would hope you all understand with the price of gas and me being sick its just not an option. As well I am open to trades but like I said this stuff is mostly to get out of my way so I don't need something else taking its place, but you never know. Ok if any questions please email me [email protected] Its the best way to get a hold of me.
