What's new
What's new

FS: Delta 1028/1029 Multi-Speed Attachment

Rick_B

Stainless
Joined
Sep 16, 2011
Location
Winston Salem, NC
This somewhat rare Delta attachment will increase the available speeds on your DP220 14” drill press from 4 to 12. I removed it from a 1942 vintage Delta 14” drill press. It will fit most machines with a 2-3/4” column. The machine it was removed from had the high speed spindle pulley – if you have the slow speed pulley you will need to get a different front belt than those included. All parts are present and accounted for and have been cleaned and, where appropriate, painted. No dings or breaks. The special 88106 bearing turns smoothly – replacements are available if necessary.

I am looking to get $225 shipped to lower 48 however everything is negotiable so feel free to make an offer. Feel free to ask for additional pictures.

Edited to add corrected photo of column plug assembly

Thanks for Looking
Corrected Picture.jpgRick
 
Last edited:
Bumping it up and adding correct pictures - make me an offer - I can always say no
 

Attachments

  • Multi Speed Instruction.jpg
    Multi Speed Instruction.jpg
    1.7 MB · Views: 12
  • Multi Speed Updated.jpg
    Multi Speed Updated.jpg
    1.5 MB · Views: 11








 
Back
Top