FS: Delta Rockwell 17-860 Drill Press Slow Speed Attachment $300

[mjk]

Testing the waters selling a Delta Rockwell 17-860 Drill Press Slow Speed Attachment

This is the gear reduction unit that fits the 17” Delta/Rockwell drill press that I picked up attached to a 17” Delta a few years back. It had been sitting for a while in a local farm shop when I picked it up. Lots of dried grease in the attachment and the drill press single phase motor that oozes ozone

I’ve since installed a new 3 phase motor with a VFD and I have also had picked up a small radial drill that has taken the larger slow speed drilling responsibilities

Current condition of the attachment is good. It has been completely disassembled and all traces of old grease removed. Reassembled with new grease. Gears and bearings are in very good condition , seals are hard but intact. Like many older pieces seals, bearings and gears are now unobtainium
Output drive is MT2 like drive from drill press spindle, it has an approximate 5:1 reduction in speed

I have the pdf of the manual for the attachment if you can’t find it

Price will be $300 shipped check or money order

I’ll post some pics of the actual attachment

Questions interest please post

 

[mjk]

Pics for above

 

[Doozer]

I have one.
Until now, I have never seen another.
Nice.

-Doozer

 

[mjk]

I had to at least 1 shameless bump

 

[mjk]

Speed attachment sold