What's new
What's new

FS - Drill - Reamers - End Mills - Brand New Items

imachine909

Cast Iron
Joined
May 17, 2010
Location
South East
See list below for items for sale. Everything new unless says regrind are unused after regrind. PayPal for payment or credit card with a 3% fee. Buy pays shipping for whatever they buy.



REAMERS
MORSE EDP#29262 .1880" DIA 4FL HSS 2PCS $12 FOR BOTH



TAPERED END MILLS
SGS EDP#32488 1/2" DIA X 7 DEG BALL 3FL COATED 4PCS $45 FOR ALL 4
WIDIA EDP#5329122 1/2" DIA X1.07"LOC BALL 2FL 4PCS $45 FOR ALL 4



INSERTS
YG-1 EDP#12000006 APKT160416PDTR YG602 10PCS $20 FOR ALL 10
ISCAR EDP#5506929 T490 LNMT 1306PNTR-CS 830 10PCS $40 FOR ALL 10




DRILLS
WALTER DC150-05-10.761A1-WJ30RE 10.716MM DIA 5XD CARBIDE THROUGHT COOLANT 2OPCS $50 FOR BOTH
YG-1 D4146015 15/16 DIA DRILL HSS 1-5/16LOC TiN COATED 4PCS $12 FOR ALL
YG-1 D4146014 7/32 DIA DRILL HSS 1-1/4LOC TiN COATED 2PCS $6 FOR ALL
GURHING 5.95MM DIA 5XD ROUGHLY TiN COATED NO BOXES 2PCS $6 FOR ALL
YG-1 31/64 DIA 3XD ROUGHLY TiN COATED NO BOXES 5PCS $28 FOR ALL
YG-1 DH424011F 11/64 DIA X 3XD CARBIDE 2PCS $15 FOR BOTH
YG-1 DH423050K 5.0MM DIA X 3XD CARBIDE 1PCS $8
YG-1 DH406058 5.8MM DIA CARBIDE 1PCS $8
YG-1 SPECIAL 6.05MM DIA X 26MM LOC CARBIDE FLAT BOTTOM DRILL! 6PCS $34 FOR ALL 6
YG-1 DH424051K 5.1MM DIA 5XD CARBIDE 2PCS $16 FOR BOTH




END MILLS
HARVEY EDP#23248 3/4 DIA X 270 DEG X .640LOC X 1.5 NECK 4FL UNCOATED LOLLIPOP TOOL 1PCS $25
HELICAL EDP#53242 1/2" DIA X .06CR X .625LOC X 3.375LBS X 6""OAL" 4FL APLUS COATED 1PCS $20
HELICAL EDP#51244 1/2 DIA X .12CR X .625LOC X 2.25LBS X 4""OAL" 5FL APLUS COATED 1PCS $17
ROBB JACK FMHV-303-08-TC 1/2 DIA X SQ CR X 3/8LOC X 1.5LBS X 3"" OAL 3FL UNCOATED THROUGH COOLANT 1PCS $15
IMCO EDP#63098 1/2 DIA X .03CR X 1-1/4 LOC X 3""OAL 4FL ALTINX COATED 1PCS $20
GWS EDP#615215 1/4 DIA X BALL NOSE X 1-1/4LOC X 3" OAL 3FL ZRN COATED 1PCS $12
GWS EDP#1003657-A01 3/8"" DIA X SQ CR X 1.5LOC X 4"OAL 3FL ZRN COATED 1PCS $15
YG-1 JAG97821 3/4"" DIA X .12CR X 1""LOC X 3"" OAL 3FL COATED 1PCS $18
WALTER 25MM DIA MB265-25.0A3X200C-WJ30CA 3FL COATED THROUGH COOLANT 1PCS $42
SPECIALS 1/2"" DIA X .03CR X 1-1/4"" LOC X 3"" OAL"4FL T iALN COATED 20PCS $40 EACH
SPECIALS 1/2"" DIA X SQ CR X 2"" LOC X 4"" OAL" 3FL ZRN COATED 20PCS $45 EACH
SPECIALS .98"" DIA X .04 X 45DEG X 1.65"" LOC X 3.5"" OAL 6FL COATED FOR STEEL 10PCS $34 EACH
SPECIALS 1"" X .04 X 45DEG X 1.65"" LOC X 4"" OAL" 4FL COATED FOR STEEL 10PCS $38 EACH
SPECIALS 3/4"" DIA X .06CR X 1.375 LOC X 4.25 OAL 5FL COATED FOR HARD METAL 15PCS $32 EACH
MELIN EDP#ST1842 1"DIA X .045 CHAMFER X 1.625LOC X 4"" OAL 6FL COATED WITH All4 2PCS $42 EACH
YG-1 UGMH07931 1/2 DIA X .125CR X 5/8LOC X 3-3/8LBS X 6"" OAL" 5FL TITAN NOX 2PCS $62 FOR BOTH
YG-1 SPECIAL 3/4 DIA X CHAMFER CORNER X 1-1/2 LOC X 4"" OAL 4FL V7 PLUS 2PCS $75 FOR BOTH
YG-1 UGMH07967 3/4"" DIA X .250CR X 1-1/8LOC X 3-1/4LBS X 6"" OAL 5FL TITAN NOX 2PCS $85 FOR BOTH
 

Chips Everywhere

Aluminum
Joined
Apr 29, 2021
I am interested in the following:

HARVEY EDP#23248 3/4 DIA X 270 DEG X .640LOC X 1.5 NECK 4FL UNCOATED LOLLIPOP TOOL 1PCS
IMCO EDP#63098 1/2 DIA X .03CR X 1-1/4 LOC X 3""OAL 4FL ALTINX COATED 1PCS
GWS EDP#615215 1/4 DIA X BALL NOSE X 1-1/4LOC X 3" OAL 3FL ZRN COATED 1PCS
GWS EDP#1003657-A01 3/8"" DIA X SQ CR X 1.5LOC X 4"OAL 3FL ZRN COATED 1PCS
YG-1 JAG97821 3/4"" DIA X .12CR X 1""LOC X 3"" OAL 3FL COATED
 

imachine909

Cast Iron
Joined
May 17, 2010
Location
South East
***ERROR***
WALTER DC150-05-10.761A1-WJ30RE 10.716MM DIA 5XD CARBIDE THROUGHT COOLANT 2PCS $50 FOR BOTH

Full price would be $3,651.00 for everything.

So I would do.... $2,900.00 for all of it PayPal for payment. Credit card we would figure that out if that's what you want to do.
 

Ianagos

Stainless
Joined
Sep 23, 2014
Location
Atlanta
***ERROR***
WALTER DC150-05-10.761A1-WJ30RE 10.716MM DIA 5XD CARBIDE THROUGHT COOLANT 2PCS $50 FOR BOTH

Full price would be $3,651.00 for everything.

So I would do.... $2,900.00 for all of it PayPal for payment. Credit card we would figure that out if that's what you want to do.

I machine

I think I want to pass on most of the high qty endmills that are huge and pricey I don’t have much need for them anyhow. I do want most of everything else

Let me get the list together but I want most of the stuff I just didn’t realize some of those were 20 or 40 qtys
 

Chips Everywhere

Aluminum
Joined
Apr 29, 2021
Any idea what the helix is on the "SPECIALS 1/2"" DIA X SQ CR X 2"" LOC X 4"" OAL" 3FL ZRN COATED 20PCS $45 EACH". They are just a generic brand?
 

imachine909

Cast Iron
Joined
May 17, 2010
Location
South East
I machine

I think I want to pass on most of the high qty endmills that are huge and pricey I don’t have much need for them anyhow. I do want most of everything else

Let me get the list together but I want most of the stuff I just didn’t realize some of those were 20 or 40 qtys

Yes post us a list here and we can go from that.
 

Chips Everywhere

Aluminum
Joined
Apr 29, 2021
I machine

I think I want to pass on most of the high qty endmills that are huge and pricey I don’t have much need for them anyhow. I do want most of everything else

Let me get the list together but I want most of the stuff I just didn’t realize some of those were 20 or 40 qtys

Just remember, you don't need any of the ones on my list. :D
 

imachine909

Cast Iron
Joined
May 17, 2010
Location
South East
Any idea what the helix is on the "SPECIALS 1/2"" DIA X SQ CR X 2"" LOC X 4"" OAL" 3FL ZRN COATED 20PCS $45 EACH". They are just a generic brand?

I have a grind shop make them for me. I have load of them. PM me and I can sell you all you want. I can make a deal if you want a batch of them.
Here is a picture
AC12003R-4.jpg
 

Ianagos

Stainless
Joined
Sep 23, 2014
Location
Atlanta
REAMERS
MORSE EDP#29262 .1880" DIA 4FL HSS 2PCS$12 FOR BOTH



TAPERED END MILLS
SGS EDP#32488 1/2" DIA X 7 DEG BALL 3FL COATED 4PCS $45 FOR ALL 4
WIDIA EDP#5329122 1/2" DIA X1.07"LOC BALL 2FL 4PCS $45 FOR ALL 4



INSERTS
YG-1 EDP#12000006 APKT160416PDTR YG602 10PCS $20 FOR ALL 10



DRILLS
WALTER DC150-05-10.761A1-WJ30RE10.716MM DIA 5XD CARBIDE THROUGHT COOLANT 2OPCS$50 FOR BOTH
YG-1 D4146015 15/16 DIA DRILL HSS 1-5/16LOC TiN COATED4PCS $12 FOR ALL
YG-1 D4146014 7/32 DIA DRILL HSS 1-1/4LOC TiN COATED 2PCS $6 FOR ALL
GURHING5.95MM DIA 5XD ROUGHLY TiN COATED NO BOXES 2PCS$6 FOR ALL
YG-1 31/64 DIA 3XD ROUGHLY TiN COATED NO BOXES5PCS $28 FOR ALL
YG-1 DH424011F 11/64 DIA X 3XD CARBIDE2PCS $15 FOR BOTH
YG-1 DH423050K 5.0MM DIA X 3XD CARBIDE1PCS $8
YG-1 DH406058 5.8MM DIA CARBIDE 1PCS $8
YG-1 SPECIAL 6.05MM DIA X 26MM LOC CARBIDE FLAT BOTTOM DRILL! 6PCS $34 FOR ALL 6
YG-1 DH424051K 5.1MM DIA 5XD CARBIDE 2PCS $16 FOR BOTH




END MILLS
HARVEY EDP#23248 3/4 DIA X 270 DEG X .640LOC X 1.5 NECK4FL UNCOATED LOLLIPOP TOOL 1PCS$25

HELICAL EDP#53242 1/2" DIA X .06CR X .625LOC X 3.375LBS X 6""OAL" 4FL APLUS COATED 1PCS$20

HELICAL EDP#51244 1/2 DIA X .12CR X .625LOC X 2.25LBS X 4""OAL"5FL APLUS COATED 1PCS $17

ROBB JACK FMHV-303-08-TC 1/2 DIA X SQ CR X 3/8LOC X 1.5LBS X 3"" OAL 3FL UNCOATED THROUGH COOLANT 1PCS $15

IMCO EDP#63098 1/2 DIA X .03CR X 1-1/4 LOC X 3""OAL 4FL ALTINX COATED 1PCS $20

GWS EDP#6152151/4 DIA X BALL NOSE X 1-1/4LOC X 3" OAL 3FL ZRN COATED 1PCS $12

GWS EDP#1003657-A01 3/8"" DIA X SQ CR X 1.5LOC X 4"OAL 3FL ZRN COATED 1PCS $15

YG-1 JAG97821 3/4"" DIA X .12CR X 1""LOC X 3"" OAL 3FL COATED 1PCS $18

SPECIALS 3/4"" DIA X .06CR X 1.375 LOC X 4.25 OAL 5FL COATED FOR HARD METAL 15PCS $32 EACH. Just one PCs on this

YG-1 UGMH07931 1/2 DIA X .125CR X 5/8LOC X 3-3/8LBS X 6"" OAL"5FL TITAN NOX 2PCS $62 FOR BOTH

YG-1 SPECIAL 3/4 DIA X CHAMFER CORNER X 1-1/2 LOC X 4"" OAL 4FL V7 PLUS2PCS $75 FOR BOTH

YG-1 UGMH07967 3/4"" DIA X .250CR X 1-1/8LOC X 3-1/4LBS X 6"" OAL 5FL TITAN NOX2PCS $85 FOR BOTH


Ok I can do the math on this if need be but I want to get this updated to not cause any confusion
 

imachine909

Cast Iron
Joined
May 17, 2010
Location
South East
REAMERS
MORSE EDP#29262 .1880" DIA 4FL HSS 2PCS$12 FOR BOTH



TAPERED END MILLS
SGS EDP#32488 1/2" DIA X 7 DEG BALL 3FL COATED 4PCS $45 FOR ALL 4
WIDIA EDP#5329122 1/2" DIA X1.07"LOC BALL 2FL 4PCS $45 FOR ALL 4



INSERTS
YG-1 EDP#12000006 APKT160416PDTR YG602 10PCS $20 FOR ALL 10



DRILLS
WALTER DC150-05-10.761A1-WJ30RE10.716MM DIA 5XD CARBIDE THROUGHT COOLANT 2OPCS$50 FOR BOTH
YG-1 D4146015 15/16 DIA DRILL HSS 1-5/16LOC TiN COATED4PCS $12 FOR ALL
YG-1 D4146014 7/32 DIA DRILL HSS 1-1/4LOC TiN COATED 2PCS $6 FOR ALL
GURHING5.95MM DIA 5XD ROUGHLY TiN COATED NO BOXES 2PCS$6 FOR ALL
YG-1 31/64 DIA 3XD ROUGHLY TiN COATED NO BOXES5PCS $28 FOR ALL
YG-1 DH424011F 11/64 DIA X 3XD CARBIDE2PCS $15 FOR BOTH
YG-1 DH423050K 5.0MM DIA X 3XD CARBIDE1PCS $8
YG-1 DH406058 5.8MM DIA CARBIDE 1PCS $8
YG-1 SPECIAL 6.05MM DIA X 26MM LOC CARBIDE FLAT BOTTOM DRILL! 6PCS $34 FOR ALL 6
YG-1 DH424051K 5.1MM DIA 5XD CARBIDE 2PCS $16 FOR BOTH




END MILLS
HARVEY EDP#23248 3/4 DIA X 270 DEG X .640LOC X 1.5 NECK4FL UNCOATED LOLLIPOP TOOL 1PCS$25

HELICAL EDP#53242 1/2" DIA X .06CR X .625LOC X 3.375LBS X 6""OAL" 4FL APLUS COATED 1PCS$20

HELICAL EDP#51244 1/2 DIA X .12CR X .625LOC X 2.25LBS X 4""OAL"5FL APLUS COATED 1PCS $17

ROBB JACK FMHV-303-08-TC 1/2 DIA X SQ CR X 3/8LOC X 1.5LBS X 3"" OAL 3FL UNCOATED THROUGH COOLANT 1PCS $15

IMCO EDP#63098 1/2 DIA X .03CR X 1-1/4 LOC X 3""OAL 4FL ALTINX COATED 1PCS $20

GWS EDP#6152151/4 DIA X BALL NOSE X 1-1/4LOC X 3" OAL 3FL ZRN COATED 1PCS $12

GWS EDP#1003657-A01 3/8"" DIA X SQ CR X 1.5LOC X 4"OAL 3FL ZRN COATED 1PCS $15

YG-1 JAG97821 3/4"" DIA X .12CR X 1""LOC X 3"" OAL 3FL COATED 1PCS $18

SPECIALS 3/4"" DIA X .06CR X 1.375 LOC X 4.25 OAL 5FL COATED FOR HARD METAL 15PCS $32 EACH. Just one PCs on this

YG-1 UGMH07931 1/2 DIA X .125CR X 5/8LOC X 3-3/8LBS X 6"" OAL"5FL TITAN NOX 2PCS $62 FOR BOTH

YG-1 SPECIAL 3/4 DIA X CHAMFER CORNER X 1-1/2 LOC X 4"" OAL 4FL V7 PLUS2PCS $75 FOR BOTH

YG-1 UGMH07967 3/4"" DIA X .250CR X 1-1/8LOC X 3-1/4LBS X 6"" OAL 5FL TITAN NOX2PCS $85 FOR BOTH


Ok I can do the math on this if need be but I want to get this updated to not cause any confusion

I will update the list in a little bit and remove what you want. PM incoming for payment details and shipping. Thanks!
 

imachine909

Cast Iron
Joined
May 17, 2010
Location
South East
Here updated pricing and revised list with just the remaining items.


Updated list and pricing (will make a deal for the remaining items)


Pictures upon request

INSERTS
ISCAR EDP#5506929 T490 LNMT 1306PNTR-CS 830 10PCS FOR $40.00



END MILLS


WALTER 25MM DIA MB265-25.0A3X200C-WJ30CA 3FL COATED THROUGH COOLANT 1PCS $42 (New $35.00

SPECIALS 1/2"" DIA X .03CR X 1-1/4"" LOC X 3"" OAL"4FL TiALN COATED 20PCS $725.00

SPECIALS 1/2"" DIA X SQ CR X 2"" LOC X 4"" OAL" 3FL ZRN COATED 20PCS $45 EACH $875.00

SPECIALS .98"" DIA X .04 X 45DEG X 1.65"" LOC X 3.5"" OAL 6FL COATED FOR STEEL 10PCS $300.00

SPECIALS 1"" X .04 X 45DEG X 1.65"" LOC X 4"" OAL" 4FL COATED FOR STEEL 10PCS $320.00

SPECIALS 3/4"" DIA X .06CR X 1.375 LOC X 4.25 OAL 5FL COATED FOR HARD METAL 14PCS $400.00

MELIN EDP#ST1842 1"DIA X .045 CHAMFER X 1.625LOC X 4"" OAL 6FL COATED WITH All4 2PCS $72.00
 








 
Top