What's new
What's new

FS: indexable milling cutters

mattthemuppet

Stainless
Joined
Apr 22, 2016
Location
San Antonio
Another box off the shelf

Top: 4x3/4x1-1/4 60deg double angle cutter $10, ECC3100RU-45 1” shank angle cutter (one insert only) $30

Bottom: Iscar BCM D62 and Seco 217.60-01.00 both with damaged pockets $10 each

Iscar Helido 1” shank, Mitsubishi APX 1-1/4” shank, Carboloy R217.69 1” shank, Iscar Helitang ELN 3/4” shank $30 each

Two Seco C-114274-D cutters, no screws $10 each

Seco PM08B-08200-20N1 20mm shank, Seco BD131 5821 16600 $30 eachIMG_1596.jpegIMG_1597.jpegIMG_1598.jpegIMG_1599.jpegIMG_1600.jpegIMG_1601.jpegIMG_1602.jpegIMG_1604.jpegIMG_1605.jpeg
 
Oh and that top of a boring head is free to anyone that can use it

Necro post back to life!! Do I have room for these, if still available?
Top: 4x3/4x1-1/4 60deg double angle cutter $10
Oh and that top of a boring head is free to anyone that can use it
--- I think I have a shank that might fit this if nobody wanted it yet. ;)---
 
Last edited:
Necro post back to life!! Do I have room for these, if still available?
Top: 4x3/4x1-1/4 60deg double angle cutter $10
Oh and that top of a boring head is free to anyone that can use it
--- I think I have a shank that might fit this if nobody wanted it yet. ;)---
I’ll make sure it fits :)

The free top of a boring head is literally that:IMG_2285.jpegIMG_2286.jpegIMG_2287.jpeg
 








 
Back
Top