What's new
What's new

FS: Jacobs drill chucks, LIke new Kant-Twist clamps, a few collets and 244 pictures of thing you can own.

Some times things just dont seem to want to happen....

Before Christmas I ordered bubble wrap and USPS boxes. The bubble wrap had a deliver date of Jan 2 a Tuesday.... then is became Tuesday the 9th, then Tuesday the 16th... I kinda thought it would be here in time for this sale...Friday evening the deliver date was changed to yet another Tuesday the 23rd. Of course today it was delivered in the rain....is had to be out there for some time... The inside bottom of the wrapper had lots of water.. I dont get to use this for packing until it dries out....

Why would I mention this?
While searching for something to pack boxes I noticed a couple garbage bags.... Hmmm.... all my wife's friends send me the old wash cloths, dish towels and the such to use for rags. So folks many of you have packing material out of those bags....

FYI if there is red danger flagging in your box follow it to the end where all the small goodies that might get lost will be found.

If you paid I found a box to ship your stuff... and you should have a tracking number already....
If I missed you please feel free to let me know.

As always thanks to everyone that looked at this...
 
The Kant Twist clamps arrived today. That was lightning fast! Yep they're almost like new. And yes, the towels and wash cloths will come in handy in the shop! Hope you got my mail. Thanks!

Oh and I coulda bought a lot more. But had to exercise some self control. Arrrgh!
 
The Kant Twist clamps arrived today. That was lightning fast! Yep they're almost like new. And yes, the towels and wash cloths will come in handy in the shop! Hope you got my mail. Thanks!

Oh and I coulda bought a lot more. But had to exercise some self control. Arrrgh!
I did get your mail...
You may not be aware I have a hoarding issue.
To check on some things takes a while. I recall maybe 10 or so years ago I relocated 2 pretty much NIB digital calipers.
But the real question is where did I put them?
With a fresh cup of coffee in hand I started the search. The problem I have is limited flat area and the stuff I didnt put away.. So last evening when the coffee cup was almost empty and very cold I quit putting things away.

This morning fresh and hot coffee in hand I found them. Can you see them in the picture?
Behind the drill indexes and under the antique DRO are Brown & Sharpe and Starrett 12" digital calipers in their boxes without batteries installed.

Sorry nothing bigger.
Looking at the picture Im wondering what is missing on the right end of the Hout cabinet?

FYI control is only an illusion best exercised on the spending habits of significant others.

20240125_094243.jpg 20240125_113106.jpg
 
Last edited:
Revision #2

#1






B1,2) Jacobs #36 MT4 3/16"-3/4" with key, works could use more cleaning $45 each

B3) Jacobs #36 1" shank with key, works could use more cleaning $45 each

C1,2) Jacobs #36B threaded 3/4"x 16 with key, .18 - .80 $40 each

D1,2) Jacobe 6A #2MT with key, 0-1/2" works could use more cleaning $25 each


F) Jacobs 32 with key 3/4" shank 0-3/8" $15


H) Jacobs 31Ba 3/8x24 threaded. $5 maybe new under the wax. Maybe not.





#2





A) 3 @ 5/8" and 2 @ 5/16"? the 2 uncoated ones have chips other wise sharpe $10 for all of them

B) 1- 2x3 $10 for the pair


E) 3 arbors with cutters. the one with the letter E is welded. $15 for all of them

F) Valentine vsc-4125-6b125 With a 1" Weldon arbor $25

G) 16TPI thread comb $10

H) When I first saw this it was coated with wax. It looked like an R8 shank. My first thought was what Bridgeport could possibly turn this?

Futuremill wedge 60707-2 $30

K) Valentine ba-3.5-4r on a 40 taper $25

L) Royel tap holder 1" shank $15

M) 4 pieces 0-1/2 drill chuck, 1", 3/4, and 1/2" unknown mount. $25 for all 4

20240115_112354.jpg20240115_112407.jpg20240115_112427.jpg

N) Taper 40 kwik-switch 300 master 804446,80351,80348, 80339 near new $150 for all

20240115_112711.jpg

O) 1" arbor shank small end is 1" , large end 1.80" over 2.7" $10


#3





A) 2 Morse form tools new? $ 20 for the pair

B) Kennametal Kenlock LSR-5 $15

C) Enco missing one clamp $5

D) Valentine $10

E) 1" shank $8

F) Kennametal 3/4" shank $15

G) Valentine 1" shank $15

H) 2 3/4" dia 1" shank extra inserts? $15

L) 1 1/4" dia 4 1/4 long 10 inserts $25 (If this doesnt sell thats okay)

N) Darex cbn 2115 Are they junk or can you use them $15 for the pair


#4


 
Continued so the pictures show
#5





A) Brown & Sharpe 788-360 without the collet clamp, two 1/4X 20 threaded holes 2 1/2" cubes $12 each

B) 4 pair 1" x 2" x 3" threaded holes $12 per pair

C) Dorian 73310102500 new $80

D) Fette F001 like new, 4X40 dies and misc $675


G) Brown & Sharpe 11-236-332 $25

O) 3/4" table stops?? $15


R) new unused Vertex 5" X .30... 1.38" center to center holes 1.10" center

21, 23, 27, 29, 31, 33

37, 39, 41, 43, 47, 49 $25 for the pair

S) They can be anything you want them to be $5 for the pair.



#6





C) Southbend ?? Keith Rucker just made a spindle for its brother. Local pickup might be necessary $250

D) Dumore D2 needs a cord and base runs That 1/8" spindle almost went to a different project $50

F) Mighty Mini oil skimmer and fittings. Runs $225

G) For a smaller lathe maybe a 9c or the not to be mentioned 47!4$ Runs with a cord hooked up and needs a belt... $50



#7




A) 25+ counter bores $30

B) 29/32" with thru oil hole #3MT $ 15 for the pair


E) 15/16" MT#3 or 1 3/8" MT#4 $10 each

F) 1/2" X 12" MT#2 New? $15

G) (1) 1 1/4", (3) 1 5/32" altered shanks $10 for all 5



#8





B&C) Objects that appear to be 5C collet fixtures. I didnt do well with them Your choice $7.50

E) Better makers 5C Collets $5 each

Royal 1/8", Rivet 3/32", 7/32", 15/16" Buck 1/2"

Hardinge 3/16", 3@ 5/16", 13/16"

F) China, Taiwan 5C collets $3 each

1/16" X2 5/16" X4 21/32"

7/64" 3/8" X2

1/8" X4 1/2"

5/32" 13/16" X2

3/16" X2 9/16" 31/32" X2

1/4" X2 19/32"

9/32" 5/8" X2 15/16"
1 1/16" 1 1/8"

G) 5 shop made collets that appear to be brass and steel 3c $20

H) Universal Engineering 90397 & 2 AcuraFlex collets $17


L) 20+ taping collets $30 for all of them. The wood block might be expensive to ship whole...

N) 1/4", 5/16", 2@3/8", 7/16",3@1/2", 5/8", 11/16", 7/8" 2.03 tall 1.37 dia $20

O) EA 6802K 1/4", 3@5/16", 3/8", 2 7/16", 1/8P $15 for all

p) AF11 collets [email protected], 3@2MM, 2.5MM, 6.5MM, 2@ 3/16", 1/4", 13/64" $20

S1) MHC 4" X 1 1/8" 09743402 $45

S2) SPI 3" X1" 71-473-3 $40

S3,4,5,6) MHC 6" X 1 1/8" 09743600 $85 each

S7,8) MHC 5" X 1 3/16 09743501 $70 each
 
I'll take group G if not already taken
G) 5 shop made collets that appear to be brass and steel 3c $20
and S2) SPI 3" X1" 71-473-3 $40 if not taken.
 








 
Back
Top