What's new
What's new

FS: Lot of 60 lightly used end mills.

DanielC

Plastic
Joined
Nov 17, 2023
These are the not new end mills but are still very usable.There are about (60). Nine are large, 7/16-3/4 Dia. Thirty are on a 3/8 shank and are mostly 1/4”. Ten are 3/16 shank and range from 1/16-3/16”. Ten are ball nose In various sizes. Two are tapered, (1) is a 2 degree the large one is a 7 degree. The 3/4 diameter end mill has a small chip on one corner, otherwise in very good shape. The photos make them appear to have nicks in the flutes but they do not. The flutes are in good condition. They weigh approx. 4 1/2 lbs.
$100.00 for the lot plus $15.00 shipping in the US.
 

Attachments

  • IMG_2294.jpeg
    IMG_2294.jpeg
    3.3 MB · Views: 32
  • IMG_2293.jpeg
    IMG_2293.jpeg
    2.4 MB · Views: 32
  • IMG_2295.jpeg
    IMG_2295.jpeg
    1.7 MB · Views: 26
  • IMG_2296.jpeg
    IMG_2296.jpeg
    3.9 MB · Views: 25
  • IMG_2292.jpeg
    IMG_2292.jpeg
    1.9 MB · Views: 31








 
Back
Top