What's new
What's new

FS: R8 end mill holders, parallels, indicators, and much more

lazz

Active member
As usual I dont care about payment.... Mail me a check.... paypal ...what ever you wanna do works for me.
First dibs are awarded to the first post. Send a follow up PM and tell me how you wanna pay and Ill get you the necessary details.

Shipping.... Everything will be plus shipping....Im sending this via USPS flat rate boxes.... The cheapest rate possible....

Shipping prices have changed .
Small flat rate box is now $8.50
Region A $9 -$13
Medium flat rate box $15.50
Large flat rate box $22



Picture 1
20210207_123259.jpg

More pictures of #1
A)<<<SPOKEN FOR>>> Pins .061+ to .250+ Complete with a so-so stand $30
B)<<<SPOKEN FOR>>> Pins .251- to .500- Complete with a so-so stand $50
C)<<<SPOKEN FOR>>>HDT grade B 81 piece Guage block set $55
D)<<<SPOKEN FOR>>>Starrett 899 Shaper Guage Perfect $85
E)<<<SPOKEN FOR>>> Lufkin 900 Shaper Guage Stained $35
F) <<<SPOKEN FOR>>>Starrett 231-F $12
G) <<<SPOKEN FOR>>>Starrett 230 $15
H) Brown & Sharpe 579 $25
I) <<<SPOKEN FOR>>>Helios 6 1/2" $15
R) Starrett 436 3-4 Works needs some love $10
O) Metric and imperial calipers $5 for the pair




Picture 2
20210209_103300.jpg

More pictures of #2
A) <<<SPOKEN FOR>>>Super Wee Blocks Nice $90
B) Brown & Sharpe 673-20 Nice $100
C) <<<SPOKEN FOR>>> 2.79X 2.85X 3.87 $25
D) <<<SPOKEN FOR>>> 3X 4.5X6X 1.15 $25
E) <<<SPOKEN FOR>>>2.13X 2.96X 4.79 $20
F) <<<SPOKEN FOR>>>2.88X 3.88X 3.85X .88 $25
G) Brown & Sharpe 673 -6 $18
H) <<<SPOKEN FOR>>> Starrett 154-B $10
I)<<<SPOKEN FOR>>> Shop made mag-na-hold with out magnets .180x .750X5 $15 for the pair
J)<<<SPOKEN FOR>>> Single Mag-na-hold $20
L) Grinder mag blocks .97X 1.93X 3.77 $45
O) V-block & clamp 1.37X 1.35X 1.18 $12
P) V-block 1.19X 2.50 3.75 $5
R) <<<SPOKEN FOR>>>V-block crusty 1.52X 2.02X 2.54 $5
S) Religious (lots of holes) 1X2X3 $5
T) <<<SPOKEN FOR>>>Gar Microfinish guage $18
U) Import mad bases $5 for the pair
X)<<<SPOKEN FOR>>> import bench block $10
Y) <<<SPOKEN FOR>>>Brown & Sharpe 750-2 66 with clamps nice $80


Picture #3
20210209_111446.jpg

More pictures of #3
A)<<<SPOKEN FOR>>> 5 X 6 sine plate $80
B) Die grinder tool post adapter 1.45 small end 2.68 large end $5
C) 3" grinder vise, a previous owner was Skip Butcher $75
D)<<<SPOKEN FOR>>> 10 pair of parallels 1/2- 1 5/8X 6X 1/8 $15
E) 3X6 sine bar $35
F) Screw jacks $8 for the pair
G) Screw jacks $8 for the pair
H) <<<SPOKEN FOR>>> End mill grinding jib with 1/2" 5C collet $25
I) Work/vise stop 6 1/2" long, 5 1.4 tall $7
J)<<<SPOKEN FOR>>> Clamp stands 1" diameter [email protected] .370, [email protected] .88, [email protected] 1.80 $5 for all os them
L) Screw jacks $8
O)Swivel head Screw jacks $10 per pair
P)<<<SPOKEN FOR>>> Swivel head Screw jacks $10 per pair
R)<<<SPOKEN FOR>>> 6 Pair of misc parallels .3X.5X6, .370X1X4.5, 1.55X1X6, 1.125X1.37X6, .2X1.20X6, 1.30X1.92X6 $10 for all of them
T) <<<SPOKEN FOR>>>2 dividing head plates 4.5 diameter, 1.112 center hole, plate 1 21,23,27,29,32,33 plate 2 49,47,43,41,39,37 $25 for the pair
S) <<<SPOKEN FOR>>>1" diameter shop made jacks [email protected] 1/2, [email protected], [email protected] 3 $5 for all of them
U) <<<SPOKEN FOR>>>4 X 5 1/4 X 1 1/4 cast iron lapping plate $60
UNLABLED Between D and R) MIxed 6" parallels [email protected] 1/2X 1, [email protected] 1/4 7/8, 1/2 and 1/4 X 3/4, 1/2 and 1/4 X 5/8, [email protected]/4 X 3/8 $10

Picture #4
20210210_094542.jpg


More pictures of #4
A&B) Jacobs Commutator Chuck, No. 100 $30 each
C) Jacobs 18N 1/8"-3/4" with a rough MT4 shank and key $70
D) Albrecht 1/32-1/2" 3/4" shank $75
E) Mystery tool holder MT3 shank 29/64" drill fits $5
F) Iscar R8 1" stub arbor The key showed some abuse. I turned it over and it seems fine. $50
G <<<SPOKEN FOR>>>Incorrectly labeled H) 2 1/2" R8 fly cutter 3/8 tools $25
H <<<SPOKEN FOR>>>Incorrectly labeled G) Yuasa 3/4" R8 end mill holder $20
I) Japan 3/4" R8 end mill holder $15
J)<<<SPOKEN FOR>>> Yuasa 7/8" end mill holder $20
L) No Name 1" R8 end mill holder $15
O) For the brave..... SPI 1 1/4" R8 end mill holder $20
P) Haas 3/4" TH111061 40 taper $20
R) Bliz WFLK 225 BM With #10, 1/8 pipe, 9/16", 5/16" collets. the knurled ring shows a crash. I was unable to open the chuck and put in a collet, the balls would not free up. The chuck might be in need of repair. How about $75 for the collets and chuck... thats about the going rate for collets on Ebay
S)<<<SPOKEN FOR>>> Toe Clamps $90 for all 6
T) Sandvik N331.32 080t25fM $100
U) Weldon R8 end mill holders 3/16", 3/8", 1/2", 5/8", 1" $100
X) <<<SPOKEN FOR>>>Tapamatic 30 with both collets works well $125
Y) Procune collets? 1/8 pipe,[email protected]#8, [email protected] #10, #12, 3/16", 1/4", 5/16", [email protected] 3/8" 7/16 $60 for all of them



Picture #5
20210210_110349.jpg

Out of order pictures of #5
A) <<<SPOKEN FOR>>>Gerstner Box $100 sorry about the pictures.. this upload took a LONG time and didnt come out as well as I would have liked
B) No Name height guage $45
C) Starrett last word indicator nice $60
D&E) Federal indicator Sticks $5 each
F) <<<SPOKEN FOR>>>Notice the clamp screws are broken. $10
G) Indicator boom $10
H) Federal 2" works great needs a new crystal $20
I) Federal very nice $30
J) China works 1" $5
P) <<<SPOKEN FOR>>>Johnson Gage works well $30
R) Hardinge 1" needs a crystal $20
S) <<<SPOKEN FOR>>>Starrett Sticks X826 $5
L) <<<SPOKEN FOR>>>Lufkin .0001 works well $40
O) China works 1" $5
T) <<<SPOKEN FOR>>>Indicator tips $10
U) NoName surface guage $10
X) <<<SPOKEN FOR>>>Starrett 56 surface guage $20
Y) <<<SPOKEN FOR>>>Brown & Sharpe 621 surface guage $20
Z) unpictured Ideal tool indicator $20
 
Last edited:

lazz

Active member
Picture #6
20210210_170745.jpg

More Pictures of #6
A) <<<SPOKEN FOR>>>Indicol pile $20 for all of it
B) 3" and 6" square $10 for the pair
C) <<<SPOKEN FOR>>>Starrett square stained , not abused. $35
D) <<<SPOKEN FOR>>>Like mag-na-hold without magnets $15 for the pair
E) <<<SPOKEN FOR>>>C5 Spin index $35
F) No name surface guage $10
G) Transfer screws compete sets of 6 screws. 6x32, 8x32, 10x24, 10x32, 1/4X20, 1/4x28, 5/16x18, 3/8x16 $100 for 8 sets
H) <<<SPOKEN FOR>>> Incomplete transfer screw sets [email protected], [email protected], [email protected]/4x20, [email protected]/16x18, [email protected]/8x16 $25 for all of them
I) USA MADE Lathe mandrels 3/4", 11/16", 5/8", 9/16", [email protected]/2", 7/16", [email protected]/8"[email protected]/16" $125 for all of them
J) Pipe Taps 1",[email protected]/4", [email protected]/2", [email protected]/8" [email protected]/4", [email protected]/8 $30 for all of them
L) 2 arbors 1/2" 3/8" $5 for the pair
O)<<<SPOKEN FOR>>> Stanley #4 $7 for the pair
P) <<<SPOKEN FOR>>>Misc pins $5
R) 1/4"X1" magnetic pins Pack of 10 for $5
S) <<<SPOKEN FOR>>>Mixed brands telescoping guages. 5 for $12
T) <<<SPOKEN FOR>>>Lufkin radius guages $10
U)Import radius guages $12



Picture #7
20210210_183306.jpg

More Pictures of #7
A) <<<SPOKEN FOR>>>31 T-nuts mostly 1/2X13 $12
B)10 bigger t-nuts $5
C) <<<SPOKEN FOR>>>21 straps $$10
D) <<<SPOKEN FOR>>>16 MISC DA400 collets $25 for all of them
E)<<<SPOKEN FOR>>> 8 hold downs $15
F)<<<SPOKEN FOR>>> 14 hold downs $15
G)<<<SPOKEN FOR>>> 8 hold downs $15
H)<<<SPOKEN FOR>>> 9 bolts $5
I) 16 hold downs $10


The books are gone several times over.
Books

For my good deed today.
Pay for shipping and the books are yours.


20210210_203319.jpg
20210210_203855.jpg

<<<SPOKEN FOR>>>More pictures of Books
<<<SPOKEN FOR>>>More Pictures of Books
 
Last edited:

Nemesis

New member
lazz, not sure if you meant to have a link or list attached, but there doesn't appear to be either right now. Thought you would like to know.
 

lazz

Active member
lazz, not sure if you meant to have a link or list attached, but there doesn't appear to be either right now. Thought you would like to know.

I want to get everything together...
If I upload pictures it can and will fragment the post as folks claim stuff...
Its coming...
 

Halcohead

Active member
I'll take:

1D) Starrett 899 Shaper Guage Perfect $85

2A) Super Wee Blocks Nice $90
2Y) Brown & Sharpe 750-2 66 with clamps nice $80

3P) Swivel head Screw jacks $10 per pair
3S) 1" diameter shop made jacks [email protected] 1/2, [email protected], [email protected] 3 $5 for all of them
UNLABLED Between D and R) MIxed 6" parallels [email protected] 1/2X 1, [email protected] 1/4 7/8, 1/2 and 1/4 X 3/4, 1/2 and 1/4 X 5/8, [email protected]/4 X 3/8 $10

5A) Gerstner Box $100 (however if someone desperately wants this in the next couple days, speak up and they can take it)
5L) Lufkin .0001 works well $40
5S) Starrett Sticks X826 $5
5Y) Brown & Sharpe 621 surface guage $20
 

rrrgcy

Member
I’ll take:
Pic 1- G (Starrett 230 $15)
Pic 2 - I, J, and T (Shopmade magna holds pair $15, single magna-hold $20, T. Gar microfinish gage $18)
Pic 4 - H incorrectly labeled G, and J (Yuasa R8 3/4 end mill holder $20, Yuasa R8 7/8 end mill holder $20)
Pic 6 - D (like magnahold pair $15)
Total- $123 + shipping. PM sent !Thanks!
 
Many thanks to lazz for offering cool stuff for not a lot of money! Even tho the things I was interested in got snapped up already, it's always fun going thru your pictures and descriptions!
 








 
Top