zamboni2354
Cast Iron
- Joined
- May 26, 2008
- Location
- Long Beach, CA.
6x12 mag chuck. $500 plus shipping from Long Beach, CA. Pretty sure I can get it in a large flat rate.
Jeff
From the web:
Models with the suffix "S0, S1 or S2" are part of the SineSet[emoji2400] System. The chucks are designed to bolt directly, with little or no indicating, to a SineSet[emoji2400] sine plate or compound sine plate of the same size and series to form a magnetic sine plate or magnetic compound sine plate.
Can be used alone as a parallel chuck.
Made with ceramic magnets for superior holding power.
Chucks are lubricated and sealed against dirt and liquids.
Includes handle, side and back rails.
Made in the U.S.A.
STANDARD POLE: 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts.
Sent from my SM-G998U using Tapatalk
Jeff
From the web:
Models with the suffix "S0, S1 or S2" are part of the SineSet[emoji2400] System. The chucks are designed to bolt directly, with little or no indicating, to a SineSet[emoji2400] sine plate or compound sine plate of the same size and series to form a magnetic sine plate or magnetic compound sine plate.
Can be used alone as a parallel chuck.
Made with ceramic magnets for superior holding power.
Chucks are lubricated and sealed against dirt and liquids.
Includes handle, side and back rails.
Made in the U.S.A.
STANDARD POLE: 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts.
Sent from my SM-G998U using Tapatalk
